Contents
Dimensions
| Overall Length | 32.81 ft in (10000 mm) |
| Overall Width | 8.01 ft in (2440 mm) |
| Wheelbase | 21 ft in (6400 mm) |
| Height to Top of Cab | 9.85 ft in (3000 mm) |
| Ground Clearance | 1.43 ft in (435 mm) |
Bowl
| BowlType | Heavy-gauge steel with reinforced box construction |
| Bowl Material | Sliding floor rides on heat-treated replaceable rails. Cutting edge retracts with sliding floor. Independent axles are vertically adjustable |
| Rated Payload | 27500 lb (12474 kg) |
| Heaped Capacity | 11 yd3 (8.5 m3) |
Engine Details
| Number of Cylinders | 6 |
| Engine Make | John Deere |
| Engine Model | John Deere 6-466A |
| Displacement | 466 cu in (7.7 L) |
| Bore | 4.56 in. (116 mm) |
| Stroke | 4.75 in (121 mm) |
| Gross Power | 190 hp (142 kw) |
| Net Power | 180 hp (134 kw) |
| Power Measured @ | 2100 rpm |
| Peak Torque | 585 Ib ft (793 Nm) |
| Torque Measured @ | 1400 rpm |
| Aspiration | Turbocharged |
Operational Specs
| Operating Weight | 35500 lb (16102 kg) |
| Max Operating Weight | 63000 lb (28577 kg) |
| Operating Voltage | 24 V |
| Alternator | 50 amps |
| Battery | 2x 12 V, RC: 180 min |
| Tire Size | 23.5-25, 16 PR |
Transmission
| Type | John Deere planetary powershift with torque converter |
| Number of Gears | 6F / 1R |
| Max Forward Speed | 28.3 mph (45.5 km/h) |
| Max Reverse Speed | 5.0 mph (8.0 km/h) |
| Steering | Position-responsive type steering. Articulated frame hydraulically actuated by dual cylinders |
| Drive Axle | Differential type with inboard planetaries |
| Service Brakes | Hydraulic, power actuated. Hydraulic accumulator provides dead-engine braking |
| Parking Brake | Foot-actuated (mechanical) expanding-shoe |
+Hydraulic System
| Type | Closed center hydraulics |
| Main Pump Type | Variable displacement, constant pressure pump |
| Main Pump Flow | 34.6 gal/min (139 L/min) |
| Main System Pressure | 2350 psi (16203 kPa) |
| Elevator Drive | Hydrostatic system with axial piston motor |
| Elevator Pump Type | Variable displacement, axial piston pump |
| Elevator Pump Flow | 36.6 gal/min (139 L/min) |
| Elevator System Pressure | 5000 psi (34475 kPa) |
Service Refill Capacities
| Fuel Tank Capacity | 72 gal (272.5 L) |
| Engine Oil Capacity (w/ filter) | 6.0 gal (22.7 L) |
| Cooling System Capacity | 9.0 gal (34.1 L) |
| Transmission Oil Capacity | 13 gal (49 L) |
| Differential Case Fluid Capacity (w/ filter and hoses) | 5.75 gal (21.8 L) |
| Hydraulic System Capacity | 12 gal (45.4 L) |
| Elevator Gearcase Oil Capacity | 3.25 gal (12.6 L) |
Please tell me the capacity of the bucket, the cutting depth, the maximum layer of soil to be filled, the width of the blade (the width of the soil being cut), and the three speeds: the speed at which the soil is being cut, the speed at which the scraper is moving when loaded, and the speed at which it is moving when idle without soil, in kilometers per hour.
Bowl / bucket capacity (heaped) – 11–11.6 yd3 (about 8.5–8.8 m3)
Rated payload – about 27,500 lb (12,474 kg)
Maximum cutting depth – 7.1 in (180 mm)
Width of cut / blade width – 7.5–7.6 ft (2290 mm)
Maximum forward travel speed – 28.3 mph (45.5 km/h), depending on version
The scraper cuts approximately: 180 mm (7 in) maximum in one pass under normal operation. In practical earthmoving work, operators commonly work with: 100-180 mm layers depending on soil hardness and traction.
Typical operating speeds
– Cutting / loading soil – 4-8 km/h
– Traveling while loaded – 15-25 km/h
– Traveling empty / idle return- 25-40 km/h