CAT 908M Ag Handler Wheel Loader Specs, Weight & Dimensions

Contents

Dimensions – With Iso Coupler – Approximate

Width – Tread Center	5.08 ft in (1.55 m)
Note	Dimensions shown are based on the machine equipped with general purpose bucket and standard 400/70 R20, XMCL tires.)
Articulation Angle	39 degrees
Clearance – Bucket At 45 Degrees	9.33 ft in (2.85 m)
Clearance – Full Lift	10.25 ft in (3.13 m)
Clearance – Level Arm	4.42 ft in (1.35 m)
Clearance – Level Bucket	10.33 ft in (3.15 m)
Departure Angle	33 degrees
Dig Depth	5.7 in (144.78 mm)
Dump Angle At Full Lift	45 degrees
Fork Dig Depth	6.4 in (162.56 mm)
Fork Reach At Full Lift	1.5 ft in (0.46 m)
Height – Bucket Pin	11 ft in (3.36 m)
Height – Ground Clearance	12.96 in (329.19 mm)
Height – Ground To Cab	8.58 ft in (2.62 m)
Length – Overall With Bucket	18.25 ft in (5.57 m)
Length – Overall With Forks	19.93 ft in (6.08 m)
Length – Wheel Base	7.08 ft in (2.16 m)
Reach – Bucket At 45 Degrees	3.42 ft in (1.05 m)
Reach – Ground	2.83 ft in (0.87 m)
Reach – Level Arm	4.33 ft in (1.32 m)
Turning Radius – Inside Tire	6.67 ft in (2.04 m)
Turning Radius – Over Bucket	14.67 ft in (4.48 m)
Width – Bucket	6.75 ft in (2.06 m)
Width – Over Tires	6.5 ft in (1.99 m)

Reach – Level Arm	4.75 ft in (1.45 m)
Width – Tread Center	5.08 ft in (1.55 m)
Articulation Angle	39 degrees
Height – Ground To Cab	8.58 ft in (2.62 m)
Length – Overall With Bucket	18.75 ft in (5.72 m)
Clearance – Bucket At 45 Degrees	9.17 ft in (2.8 m)
Clearance – Full Lift	10.75 ft in (3.28 m)
Turning Radius – Inside Tire	6.67 ft in (2.04 m)
Clearance – Level Arm	4.92 ft in (1.5 m)
Width – Over Tires	6.5 ft in (1.99 m)
Clearance – Level Bucket	10.33 ft in (3.15 m)
Length – Overall With Forks	20 ft in (6.1 m)
Departure Angle	33 degrees
Length – Wheel Base	7.08 ft in (2.16 m)
Dig Depth	6 in (152.4 mm)
Turning Radius – Over Bucket	14.75 ft in (4.5 m)
Reach – Bucket At 45 Degrees	3.92 ft in (1.2 m)
Dump Angle At Full Lift	45 degrees
Fork Dig Depth	0.8 in (20.32 mm)
Note	Dimensions shown are based on the machine equipped with general purpose bucket and standard 400/70 R20, XMCL tires.)
Fork Reach At Full Lift	1.92 ft in (0.59 m)
Reach – Ground	2.92 ft in (0.9 m)
Height – Bucket Pin	10.5 ft in (3.21 m)
Width – Bucket	6.75 ft in (2.06 m)
Height – Ground Clearance	12.96 in (329.19 mm)

Emissions	*The Cat C3.3B DIT engine meets US EPA Tier 4 Final/EU Stage IIIB emission standards.
Maximum Gross Power – Sae J1995	74 hp (55.2 kw)
Maximum Net Power – Sae J1349	68 hp (50.8 kw)
Maximum Gross Power – Iso 14396	73 hp (54.5 kw)
Rated Net Power – 2,500 Rpm – Sae J1349	68 hp (50.8 kw)
Maximum Net Power – Iso 9249	69 hp (51.5 kw)
Maximum Gross Power	73 hp (54.5 kw)

Operating Weight

14402 lb (6532.7 kg)

Operating Weight	14402 lb (6532.7 kg)
Note	Machine with full fuel tank, ROPS/FOPS cab, 80 kg (176 lb) operator, skid steer loader coupler (SSL) and general purpose bucket (GP).

Bucket Capacities	ISO Coupler – 0.9-1.5 m; SSL Style Coupler – 1.2-2.0 yd
Bucket Capacities – Iso Coupler	0.9-1.5 m
Bucket Capacities – Ssl Style Coupler	1.2-2.0 yd

Hydraulic Cycle Time – Dump	1.3 seconds
Main Relief – 3rd Aux Flow: Standard	22 gal/min
Main Relief – 3rd Aux Flow	3400 psi
Main Relief – 3rd Aux Flow: High Flow	34 gal/min
Hydraulic Cycle Time – Lift	5.2 seconds
Hydraulic Cycle Time – Rackback	2.1 seconds
Hydraulic Cycle Time – Lower	3.2 seconds

Bucket Width	81 in (2057.4 mm)
Maximum Material Density	2914 lb/yd
Rated Capacity	1.4 yd3 (1.1 m3)
Dump Height	110 in (2794 mm)
Note	Based on ISO 7546:1983, and rated operating loads at full turn with 100% bucket capacity and SSL coupler.

Bucket Width	81 in (2057.4 mm)
Maximum Material Density	2771 lb/yd
Rated Capacity	2 yd3 (1.6 m3)
Dump Height	111 in (2819.4 mm)
Note	Based on ISO 7546:1983, and rated operating loads at full turn with 100% bucket capacity and SSL coupler.

Bucket Width	81 in (2057.4 mm)
Maximum Material Density	4060 lb/yd
Rated Capacity	1.2 yd3 (1 m3)
Dump Height	110 in (2794 mm)
Note	Based on ISO 7546:1983, and rated operating loads at full turn with 100% bucket capacity and SSL coupler.

Rated Bucket Capacity	1.5 yd3 (1.2 m3)
Rated Operating Load At Full Turn – Bucket	4396 lb (1994 kg)
Tire Size	400/70 R20
Straight Tipping Load – Bucket	10408 lb (4721 kg)
Rated Operating Load At Full Turn – Forks (En 474-3:2006, Firm And Level Ground, 1.25 Stability And 500 Mm [20 In] Load Center)	5719 lb (2594.1 kg)
Breakout Force – Bucket	12337 lb ft (16726.8 Nm)
Full Turn Static Tipping Load – Bucket	8789 lb (3986.7 kg)
Rack Back – Transport Position	51 degrees
Note	Machine with full fuel tank, ROPS/FOPS cab, 80 kg (176 lb) operator, ISO coupler and general purpose bucket (GP).

Rated Bucket Capacity	1.5 yd3 (1.2 m3)
Rated Operating Load At Full Turn – Bucket	4385 lb (1989.1 kg)
Tire Size	400/70 R20
Straight Tipping Load – Bucket	10399 lb (4717 kg)
Rated Operating Load At Full Turn – Forks (En 474-3:2006, Firm And Level Ground, 1.25 Stability And 500 Mm [20 In] Load Center)	5336 lb (2420.4 kg)
Breakout Force – Bucket	10215 lb ft (13849.7 Nm)
Full Turn Static Tipping Load – Bucket	8766 lb (3976.2 kg)
Rack Back – Transport Position	51 degrees
Note	Machine with full fuel tank, ROPS/FOPS cab, 80 kg (176 lb) operator, SSL coupler and general purpose bucket (GP).