Home » Tractors » Case IH Tractors » Case IH JX70 Tractor

Case IH JX70 Tractor

Contents
  1. Dimensions
  2. Engine Details
  3. Operational Specs
  4. Transmission
  5. Hydraulic System

Dimensions

Wheelbase 7.17 ft in (2184 mm)
Height With ROPS 97 in (2464 mm)

Engine Details

Number Of Cylinders 3
Gross Power 62 hp (46.3 kw)
PTO Power 52 hp (38.8 kw)
Power Measured @ 2500 rpm
Displacement 177 cu in (2.9 L)
Aspiration Turbocharged

Operational Specs

Operating Weight 5813 lb (2636.8 kg)
Fuel Tank Capacity 23.8 gal (90 L)
3 Point Hitch Lift Capacity @ 24 Inches 4010 lb (1819 kg)
Rear Tire Size (2WD/4WD) 14.9 x 28
Alternator Supplied Amperage 85 amps

Transmission

Transmission Type 12×12 w / mechanical shuttle
Number Of Forward Gears 12
Number Of Reverse Gears 12

Hydraulic System

Relief Valve Setting 2755 psi (18995.1 kPa)
Pump Flow Capacity 21.7 gal/min (82.2 L/min)
Ask a question

You may also like
CAT Dozer Size Chart
Guides 4
CAT Dozer Size Chart: Small, Medium & Large Bulldozer Specs
The CAT dozer size chart offers a comprehensive guide to the diverse range of
Massey Ferguson DTC Codes List
Massey Ferguson 0
Massey Ferguson DTC Codes List: 04.02.E6 – 06.X.1A
Massey Ferguson Diagnostic Trouble Codes (DTC) are alphanumeric codes generated by the onboard diagnostic
Massey Ferguson DTC Fault Codes List
Massey Ferguson 0
Massey Ferguson DTC Fault Codes List: 00.0.30 – 10.X.26
This page provides a list of Massey Ferguson DTCs numbered 00.0.30 through 10.X.26, which
VPAT Blade (Dozer Variable Pitch Power Angle Tilt Blades)
Guides 4
Different Types of Dozer Blades Used in Construction, Landscaping, & Mining Industry
A dozer blade, also known as a bulldozer blade, is an attachment mounted to
John Deere Armrest Interface Control AIC Error Codes
John Deere 0
John Deere AIC Error Codes / Armrest Interface Control Unit Fault DTCs AIC 000158.03 – 524224.09
The John Deere Armrest Interface Control Error Codes, commonly referred to as John Deere
JLG DTCs for MEWPs, Boom Lifts and Telehandlers
Error Codes 17
JLG Error Codes List – Diagnostic Fault / Trouble Codes (DTCs) for MEWPs / Lifts / Telehandlers
Effective troubleshooting and timely maintenance of JLG mobile elevating work platforms (MEWPs) and telehandlers