Home » Telehandlers » Lull Telehandlers » Lull 1044C54 Series II Telehandler

Lull 1044C54 Series II Telehandler

Contents
  1. Dimensions
  2. Lift
  3. Engine Details
  4. Operational Specs
  5. Transmission
  6. Hydraulic

Dimensions

Length To Fork Face 20.48 ft in (6240 mm)
Ground Clearance 15.99 ft in (406 mm)
Width Over Tires 8.44 ft in (2570 mm)
Overall Height 8.08 ft in (2460 mm)
Wheelbase 124 in (3140 mm)
Turning Radius Outside Tires 14.18 ft in (4320 mm)

Lift

Max Lift Height 54.14 ft in (16500 mm)
Max Forward Reach 44.95 ft in (13700 mm)
Max Load At Max Reach 1500 lb (680.39 kg)
Max Load At Max Height 4000 lb (1814.37 kg)
Max Lift Capacity 10000 lb (4535.93 kg)

Engine Details

Number Of Cylinders 4
Engine Make John Deere
Engine Model e 4045TF275
Gross Power 114 hp (85 kw)
Max Torque 2500 lb ft (3389.6 Nm)
Displacement 274.7 cu in (4.5 L)

Operational Specs

Operating Weight 31349.8 lb (14220 kg)
Fuel Tank Capacity 38.1 gal (144 L)
Hydraulic System Fluid Capacity 33.6 gal (127 L)
Operating Voltage 12 V
Alternator Supplied Amperage 95 amps
Drawbar Pull 21700 lb (9843 kg)
Tire Size 14.00×24

Transmission

Transmission Type modulated powershift
Number Of Forward Gears 4
Number Of Reverse Gears 3
Max Speed – Forward 21.8 mph (35 km/h)

Hydraulic

Pump Type load sensing dual gear
Ask a question

You may also like
Massey Ferguson GC1723E and GC1723EB Specs
Massey Ferguson 10
Massey Ferguson GC1723E / MF GC1723EB Specs, Weight & Tractor Attachments
The Massey Ferguson GC1700 series, including the GC1723E sub-compact utility tractor and the GC1723EB
John Deere Tractor PIN Locations
Serial Numbers 40
John Deere PIN Decoder – Where is the Serial Number Plate & How to Identify?
The Product Identification Number (PIN) / Serial Number plate on John Deere equipment contains
John Deere 950K LGP PAT Blade - Largest Six-Way Dozer Blade
John Deere 0
John Deere 950K LGP PAT Blade Specs – Largest Six-Way Dozer Blade
Manufactured with precision at the renowned John Deere Dubuque Works, the John Deere 950K
New Holland and Case IH Tractor Multifunction Controller Errors
CNH Industrial 0
New Holland & Case IH Tractor Multifunction Controller Errors
Modern tractors have transformed into intricate systems powered by multifunction controllers. These controllers are
Case IH Tractor Front Hitch Error List
CNH Industrial 0
New Holland & Case IH Tractor Hitch Error List
Certainly, here’s a guide to understanding Hitch error codes for New Holland and Case
Massey Ferguson Tractor Fault Codes Troubleshooting
Massey Ferguson 0
Massey Ferguson Fault Codes List: 10.X.27 – 04.02.E5
The Massey Ferguson DTC (Diagnostic Trouble Code) Fault Codes List (from 10.X.27 to 04.02.E5)