Contents
Dimensions
| Overall Length | 33.13 ft in (10097 mm) |
| Width Over Tires | 8.08 ft in (2460 mm) |
| Wheelbase | 20.24 ft in (6169 mm) |
| Tandem Axle Wheelbase | 5 ft in (1523 mm) |
| Height To Top Of Isomount Cab | 11.02 ft in (3356 mm) |
Engine Details
| Number Of Cylinders | 6 |
| Net Power Gear 4-6 | 200 hp (149.2 kw) |
| Engine Make | CAT |
| Engine Model | 3176C ATAAC |
| Net Power Gear 1-2 | 180 hp (134.3 kw) |
| Power Measured @ | 2000 rpm |
| Net Power Gear 5-6 | 200 hp (149.2 kw) |
| Torque Measured @ | 1000 rpm |
| Max Power | 200 hp (149.2 kw) |
| Net Power Gears 7-8 | 200 hp (149.2 kw) |
| Net Torque Gears 7-8 | 840.9 lb ft (1140 Nm) |
| Displacement | 628.6 cu in (10.3 L) |
Operational Specs
| Std Operation Weight – Front Axle | 10117 lb (4589 kg) |
| Std Operation Weight – Rear Axle | 25774 lb (11691 kg) |
| Hydraulic System Fluid Capacity | 21.2 gal (80 L) |
| Std Operation Weight – Total | 35891 lb (16280 kg) |
| Max Operation Weight – Front Axle | 18322.7 lb (8311 kg) |
| Max Operation Weight – Rear Axle | 33003 lb (14970 kg) |
| Max Operation Weight – Total | 51325.9 lb (23281 kg) |
| Fuel Tank Capacity | 104.9 gal (397 L) |
| Cooling System Fluid Capacity | 10.1 gal (38 L) |
| Rear Diff/Final Drive Fluid Capacity | 12.5 gal (47 L) |
| Circle Gearbox Fluid Capacity | 1.9 gal (7 L) |
| Tandem Case Fluid Capacity (Each) | 17 gal (64 L) |
| Tire Size | 10-24 12PR |
| Operating Voltage | 24 V |
| Alternator Supplied Amperage | 35 amps |
Steering
| Articulation Angle | 20 degrees |
| Turning Radius | 24.3 ft in (7.4 m) |
Transmission
| Number Of Gears – Forward | 8 |
| Number Of Gears – Reverse | 6 |
| Max Speed – Forward | 27.1 mph (43.6 km/h) |
| Max Speed – Reverse | 21.4 mph (34.4 km/h) |
Front Axle
| Wheel Lean | 18 degrees |
| Oscillation – Total | 32 degrees |
Moldboard
| Moldboard Width | 14 ft in (4267 mm) |
| Moldboard Height | 27.1 in (686 mm) |
| Moldboard Thickness | 1 in (25 mm) |
| Max Depth Of Cut | 30.4 in (770 mm) |
| Side Shift Left | 33.6 in (851 mm) |
| Side Shift Right | 37.2 in (943 mm) |
| Blade Pull At Max Weight | 44249 lb (20071 kg) |
| Blade Down Pressure | 30441.5 lb (13808 kg) |
Hydraulic System
| Pump Type | Axial Piston |
| Pump Flow | 68.7 gal/min (260 L/min) |
| Relief Valve Pressure | 3502.7 psi (24150 kPa) |
Circle
| Shift Left | 33.4 in (848 mm) |
| Shift Right | 34.7 in (881 mm) |
| Max Reach Outside Tires – Left | 87.6 in (2223 mm) |
| Max Reach Outside Tires – Right | 89.1 in (2261 mm) |
| Max Lift Above Ground | 17.8 in (452 mm) |
| Blade Tip Angle – Front | 40 degrees |
| Blade Tip Angle – Rear | 5 degrees |
