Contents
Dimensions – Standard Stick
| Boom Height – Shipping Position | 8.6 in (218.44 mm) |
| Boom In Reach | 5.5 in (139.7 mm) |
| Dig Depth | 13.4 in (340.36 mm) |
| Maximum Blade Depth | 1.11 in (27.94 mm) |
| Maximum Blade Height | 1.3 in (33.03 mm) |
| Maximum Dig Height | 23.8 in (604.52 mm) |
| Maximum Dump Clearance | 17 in (431.8 mm) |
| Maximum Reach | 20.7 in (525.78 mm) |
| Maximum Reach – Ground Level | 20.2 in (513.09 mm) |
| Tail Swing – Standard Counterweight | 5.7 ft in (1.74 m) |
| Track Belt/Shoe Width | 1.5 in (38.1 mm) |
| Vertical Wall | 11.9 in (302.26 mm) |
| O/A Shipping Height | 8.6 in (218.44 mm) |
| O/A Shipping Length | 19.9 in (505.46 mm) |
| O/A Track Width | 7.2 in (182.88 mm) |
| O/A Undercarriage Length | 9 in (228.6 mm) |
| Swing Bearing – Height | 2.5 in (63.5 mm) |
Undercarriage
| Number Of Carrier Rollers | 1 per side |
| Number Of Track Rollers | 5 per side |
| Track Roller Type | Center flange |
Swing System
| Machine Swing Speed | 10.2 rpm |
| Note | Automatic swing break, spring applied, hydraulic release. |
Engine Details
| Net Power | 50.6 hp (37.8 kw) |
| Displacement | 146.5 cu in (2.5 L) |
| Bore | 3.4 in (86.4 mm) |
| Stroke | 4 in (101.6 mm) |
| Engine Model | Cat C2.4 Turbo |
| Gross Power – Iso 14396 | 53.1 hp (39.6 kw) |
| Note | Meets US EPA Tier 4 Final and EU Stage IIIB emission standards. |
| Rated Net Power – 2,200 Rpm – Iso 9249/Eec 80/1269 | 50.6 hp (37.8 kw) |
Operational Specs
| Operating Weight | 16028 lb (7270.2 kg) |
Weights
| Note (1) | Weight with steel tracks with rubber pads, bucket, operator (75 kg/165 lb), full fuel and auxiliary lines. |
| Note (2) | Weight varies depending on machine configuration. |
| Operating Weight – With Cab | 16028 lb (7270.2 kg) |
Blade
| Height | 17.5 in (444.5 mm) |
| Width | 90.6 ft in (27614.9 mm) |
Hydraulic System
| Note | Load sensing hydraulics with variable displacement piston pump. |
Blade
| Lift Height | 13.8 in (350.6 mm) |
| Dig Depth | 15.3 in (388.7 mm) |
Hydraulic System
| Operating Pressure – Swing | 4061 psi |
| Operating Pressure – Equipment | 4061 psi |
| Operating Pressure – Travel | 4061 psi |
| Digging Force – Stick – Standard | 8340 lb (3783 kg) |
| Digging Force – Bucket | 11375 lb (5159.7 kg) |
| Pump Flow At 2,400 Rpm | 40.9 gal/min |
| Auxiliary Circuit – Primary (280 Bar/4,061 Psi) | 33.8 gal/min |
| Auxiliary Circuit – Secondary (280 Bar/4,061 Psi) | 8.7 gal/min |
Operating Specifications
| Machine Overhang | 1.2 in (30.5 mm) |
| Stick Length – Standard | 5.5 in (139.7 mm) |
Service Refill Capacities
| Cooling System | 3.7 gal (14.1 L) |
| Fuel Tank Capacity | 35.7 gal (135.2 L) |
| Hydraulic Tank | 13.5 gal (51.2 L) |
| Hydraulic System | 20.6 gal (78 L) |
| Engine Oil | 2.9 gal (11 L) |
Cab
| Average Exterior Sound Pressure | 98 dB(A) ISO 6395 Dynamic Test |
Travel System
| Maximum Traction Force – High Speed | 7599 lb (3446.9 kg) |
| Maximum Traction Force – Low Speed | 13331 lb (6046.9 kg) |
| Travel Speed – High | 3.2 mph (5.2 km/h) |
| Travel Speed – Low | 2 mph (3.3 km/h) |
| Gradeability – Maximum | 20 degrees |
| Ground Pressure | 4.92 psi |
| Note (1) | Each track is driven by one independent 2-speed motor. |
| Note (2) | Drive modules are integrated into the roller frame for total protection. |
| Note (3) | Straight line travel when tracking and operating the front linkage simultaneously. |
