Home » Forwarders » Ranger Forwarders » Ranger F614A Forwarder

Ranger F614A Forwarder

Contents
  1. Dimensions
  2. Engine Details
  3. Operational Specs
  4. Transmission
  5. Hydraulic
  6. Bunk
  7. Crane

Dimensions

Length 32.75 ft in (9982.2 mm)
Wheelbase 18.5 ft in (5638.8 mm)
Width Over Tires 9.89 ft in (3011.43 mm)
Height To Top Of Crane 12.09 ft in (3685.04 mm)
Ground Clearance 1.78 ft in (541.02 mm)
Length Of Bunk Area 15 ft in (4572 mm)

Engine Details

Engine Make Cummins
Engine Model Cummins 6 5.9
Power 152 hp (113.4 kw)
Displacement 359 cu in (5.9 L)
Aspiration Turbocharged

Operational Specs

Operating Weight – 6wd 62620 lb (28404 kg)
Fuel Tank Capacity 50 gal (189.3 L)
Hydraulic System Fluid Capacity 25 gal (94.7 L)
Operating Voltage 24 V
Alternator Supplied Amperage 65 amps
Front/Rear Tire Size – 6wd 700/55×34
Front/Rear Tire Size – 8wd 700/50×26.5

Transmission

Transmission Type Clark 32000 3-speed powershift
Max Speed 13 mph (21 km/h)

Hydraulic

Flow Capacity 43 gal/min (162.8 L/min)
Relief Valve Pressure 3000 psi (20684.3 kPa)

Bunk

Load Weight – 6wd 28000 lb (12700.6 kg)
Load Area 37.2 ft2 (3.5 m2)

Crane

Crane Type Cranab 650XL, 360 Grapple with GV12S Rotator
Max Reach 22.6 ft in (6888.5 mm)
Ask a question

You may also like
New Holland Auxiliary Remote Valve Error Codes
CNH Industrial 0
New Holland & Case IH Auxiliary Remote Valve Error Codes
Hydraulic systems are the muscle behind a tractor’s functionality, and New Holland and Case
Dozer Size Chart to Choose the Right Bulldozer for Your Job
Guides 2
Dozer Size Chart to Choose the Right Bulldozer for Your Job
Please note that the specifications and categorizations may vary among different manufacturers and models.
Massey Ferguson DTC Fault Codes List
Massey Ferguson 0
Massey Ferguson DTC Fault Codes List: 00.0.30 – 10.X.26
This page provides a list of Massey Ferguson DTCs numbered 00.0.30 through 10.X.26, which
New Holland MFD Differential Errors
CNH Industrial 0
New Holland & Case IH List of MFD / Differential Errors (Codes)
Understanding MFD/Differential Error Codes is essential for maintaining the performance, maneuverability, and reliability of
John Deere ACU Error Code 524103.04
John Deere 0
John Deere ACU Error Codes / Armrest Controller Unit Fault DTCs 000158.04 – 524254.31
John Deere Armrest Controller Unit (ACU) Error Codes, also known as Diagnostic Trouble Codes
KubotaNOW Telematics for Troubleshooting of Kubota Equipment
Kubota 6
KubotaNOW Telematics for Troubleshooting of Kubota Equipment
KubotaNOW Telematics represents an advanced reporting and processing system meticulously crafted for specific Kubota