Home » Forklifts » Yale Forklifts » Yale HLF20C-5 Forklift

Yale HLF20C-5 Forklift

Contents
  1. Dimensions
  2. Mast
  3. Engine Details
  4. Operational Specs

Dimensions

Length To Fork Face 7.39 ft in (2250 mm)
Overall Width 3.5 ft in (1065 mm)
Overall Height – Mast Lowered 7.01 ft in (2135 mm)
Wheelbase 4.6 ft in (1400 mm)
Ground Clearance 4.81 in (122 mm)
Height To Top Of Overhead Guard 6.89 ft in (2100 mm)
Max Fork Height 14.72 ft in (4485 mm)
Turning Radius 6.69 ft in (2038 mm)

Mast

Mast Tip Forward 6 degrees
Mast Tip Rear 10 degrees
Lower Speed 90.6 ft/min (27.62 m/min)
Load Capacity 4000 lb (1814.37 kg)
Load Center 19.69 in (500 mm)
Lift Speed 128 ft/min (39.02 m/min)

Engine Details

Engine Make Mitsubishi
Engine Model 4G64-33HL
Power 49.7 hp (37 kw)
Torque 123 lb ft (166.8 Nm)
Power Measured @ 2500 rpm
Displacement 143.3 cu in (2.4 L)
Torque Measured @ 1600 rpm

Operational Specs

Operating Weight 7696 lb (3490.9 kg)
Max Speed 10.4 mph (16.8 km/h)
Ask a question

You may also like
How Much Weight Can a Bulldozer Pull?
Guides 3
How Much Weight Can a Bulldozer Push?
The weight a bulldozer can push depends on various factors, including its size, engine
New Holland Tractor Engine DTC Fault Codes
CNH Industrial 10
New Holland & Case IH Engine Errors (Diagnostic Trouble Codes)
In the world of agriculture, where fields stretch to the horizon and the hum
John Deere Operations Center Key Features
Guides 3
Getting Started with John Deere Operations Center for Precision Ag
The John Deere Operations Center is a comprehensive online farm management system that facilitates
John Deere Armrest Interface Control AIC Error Codes
John Deere 0
John Deere AIC Error Codes / Armrest Interface Control Unit Fault DTCs AIC 000158.03 – 524224.09
The John Deere Armrest Interface Control Error Codes, commonly referred to as John Deere
John Deere 1990 CCS Air Drill (Central Commodity System) Specs
John Deere 0
John Deere 1990 CCS Air Drill (Central Commodity System)
The John Deere 1990 CCS™ (Central Commodity System) features metering gates at each individual
Bobcat TL923 Telehandler with Material Bucket
Bobcat 5
Bobcat Telehandler Fault Codes (Error Code List for Telescopic Handlers V, T, TR, TL Series)
Bobcat Telehandlers, such as the TL25, TL26, TL30, TL34, T35, TL35, T36, TL38, T40,