Home » Forklifts » EP Forklifts » EP CPDS13JD1 Forklift

EP CPDS13JD1 Forklift

Contents
  1. Dimensions
  2. Mast
  3. Engine Details
  4. Operational Specs

Dimensions

Length To Fork Face 5.88 ft in (1792 mm)
Overall Width 3.48 ft in (1060 mm)
Overall Height – Mast Lowered 6.55 ft in (1995 mm)
Wheelbase 4.11 ft in (1250 mm)
Ground Clearance 3.55 in (90 mm)
Height To Top Of Overhead Guard 77.2 in (1960 mm)
Max Fork Height 12.95 ft in (3945 mm)
Right Angle Stack 10.7 ft in (3260 mm)
Turning Radius 4.73 ft in (1440 mm)

Mast

Mast Tip Forward 6.5 degrees
Mast Tip Rear 6.5 degrees
Load Capacity 2866.01 lb (1300 kg)
Max Fork Spread 39.38 in (1000 mm)
Load Center 19.69 in (500 mm)
Lift Speed 59.06 ft/min (18 m/min)

Engine Details

Engine Make EP Electric Drive
Power 12.4 hp (9.2 kw)
Fuel Type electric motor

Operational Specs

Operating Weight 6084.8 lb (2760 kg)
Tire Type front 18×7-8 rear 15×4.5-8
Number Of Front Wheels 2
Number Of Rear Wheels 1
Max Speed 8.7 mph (14 km/h)
Ask a question

You may also like
New Holland and Case IH Automatic Temperature Control Errors
CNH Industrial 0
New Holland & Case IH Tractor ATC Error List
Certainly, here’s a guide to understanding ATC (Automatic Temperature Control) error codes for New
Bobcat Skid Steer Loader Engine Error Codes
Bobcat 3
Bobcat Engine Error Codes for Mini Excavators, Skid Steers & Compact Loaders
Bobcat Engine Error Codes are diagnostic codes generated by the onboard electronic control unit
John Deere DB120 - World's Largest Planter
John Deere 0
John Deere DB120 Specs – Largest Planter in the World (120 feet / 37 m Wide Toolbar)
The John Deere DB120 Planter is a monumental leap forward in agricultural technology, boasting
John Deere 326 P-Tier Compact Telescopic Wheel Loader
John Deere 3
John Deere 326 P-Tier Specs – Compact Telescopic Wheel Loader
Back in 2023, John Deere has announced it is shifting its L-Series compact wheel
New Holland MFD Differential Errors
CNH Industrial 0
New Holland & Case IH List of MFD / Differential Errors (Codes)
Understanding MFD/Differential Error Codes is essential for maintaining the performance, maneuverability, and reliability of
Massey Ferguson DTC Fault Codes List
Massey Ferguson 0
Massey Ferguson DTC Fault Codes List: 00.0.30 – 10.X.26
This page provides a list of Massey Ferguson DTCs numbered 00.0.30 through 10.X.26, which