Home » Forklifts » EP Forklifts » EP CPD50JD1 Forklift

EP CPD50JD1 Forklift

Contents
  1. Dimensions
  2. Mast
  3. Engine Details
  4. Operational Specs

Dimensions

Length To Fork Face 9.9 ft in (3015 mm)
Overall Width 4.53 ft in (1380 mm)
Overall Height – Mast Lowered 7.17 ft in (2185 mm)
Wheelbase 6.57 ft in (2000 mm)
Ground Clearance 8.63 in (219 mm)
Height To Top Of Overhead Guard 7.58 ft in (2310 mm)
Max Fork Height 13.51 ft in (4117 mm)
Right Angle Stack 15.31 ft in (4665 mm)
Turning Radius 8.7 ft in (2650 mm)

Mast

Mast Tip Forward 6 degrees
Mast Tip Rear 12 degrees
Max Fork Spread 47.25 in (1200 mm)
Lower Speed _ – (24.6 m/min)
Load Center 19.69 in (500 mm)
Load Capacity 11023.12 lb (5000 kg)
Lift Speed _ – (15 m/min)

Engine Details

Engine Make EP Electric Drive
Power 22.3 hp (16.6 kw)
Fuel Type mosfet

Operational Specs

Operating Weight 15322 lb (6950 kg)
Tire Type front 250/15 rear 7.00-12
Number Of Front Wheels 2
Number Of Rear Wheels 2
Max Speed 8.1 mph (13 km/h)
Ask a question

You may also like
John Deere Armrest Interface Control AIC Error Codes
John Deere 0
John Deere AIC Error Codes / Armrest Interface Control Unit Fault DTCs AIC 000158.03 – 524224.09
The John Deere Armrest Interface Control Error Codes, commonly referred to as John Deere
Kubota Diagmaster Diagnostic Software
Kubota 2
Kubota Diagmaster Diagnostic Software Tool Kit
Kubota Diagmaster is diagnostic software developed by Kubota Corporation for use with their electronic
CAT Dozer Size Chart
Guides 4
CAT Dozer Size Chart: Small, Medium & Large Bulldozer Specs
The CAT dozer size chart offers a comprehensive guide to the diverse range of
Massey Ferguson Tractor Fault Codes Troubleshooting
Massey Ferguson 0
Massey Ferguson Fault Codes List: 10.X.27 – 04.02.E5
The Massey Ferguson DTC (Diagnostic Trouble Code) Fault Codes List (from 10.X.27 to 04.02.E5)
Massey Ferguson DTC Codes List
Massey Ferguson 0
Massey Ferguson DTC Codes List: 04.02.E6 – 06.X.1A
Massey Ferguson Diagnostic Trouble Codes (DTC) are alphanumeric codes generated by the onboard diagnostic
American Wire Gauge (AWG) Size Chart
Guides 2
Wire Gauge Size Charts: AWG (American Wire Gauge), SWG (British Standard), IEC 60228
Wire gauge charts provide a reference for determining the diameter or thickness of wires,