Home » Forklifts » Crown Forklifts » Crown RC 5530/35-30 Forklift

Crown RC 5530/35-30 Forklift

Contents
  1. Dimensions
  2. Mast
  3. Engine Details
  4. Operational Specs

Dimensions

Length To Fork Face 5.63 ft in (1714.5 mm)
Overall Width 3.5 ft in (1066.8 mm)
Overall Height – Mast Lowered 6.92 ft in (2108.22 mm)
Wheelbase 3.94 ft in (1198.87 mm)
Ground Clearance 3 in (76.2 mm)
Height To Top Of Overhead Guard 7.34 ft in (2235.19 mm)
Max Fork Height 15.84 ft in (4825.99 mm)
Turning Radius 4.69 ft in (1427.47 mm)

Mast

Mast Tip Forward 5 degrees
Mast Tip Rear 5 degrees
Lift Speed 65 ft/min (19.82 m/min)
Max Fork Spread 33 in (838.2 mm)
Lower Speed 90 ft/min (27.44 m/min)
Load Center 24 in (609.6 mm)
Number Of Mast Sections 3
Load Capacity 3000 lb (1360.78 kg)

Engine Details

Fuel Type Electric 36V

Operational Specs

Operating Weight 8579 lb (3891.4 kg)
Tire Type Cushion
Number Of Front Wheels 2
Number Of Rear Wheels 2
Max Speed 7.2 mph (11.6 km/h)
Ask a question

You may also like
John Deere X590 Attachments and Optional Equipment
John Deere 0
John Deere X590 Attachments (Specs)
John Deere X590 Attachment List with Specs The John Deere X590 is a robust
Massey Ferguson DTC Codes List
Massey Ferguson 0
Massey Ferguson DTC Codes List: 04.02.E6 – 06.X.1A
Massey Ferguson Diagnostic Trouble Codes (DTC) are alphanumeric codes generated by the onboard diagnostic
Kubota Excavator Error Codes FAQ
Kubota 12
Kubota Excavator Error Codes / Fault DTCs
Kubota excavators are equipped with advanced diagnostic systems designed to monitor various components and
John Deere X495 Front End Loader attachment
John Deere 0
John Deere X495 Attachments (Specs)
The John Deere X495 Lawn Tractor stands as a reliable workhorse in the realm
John Deere 1990 CCS Air Drill (Central Commodity System) Specs
John Deere 0
John Deere 1990 CCS Air Drill (Central Commodity System)
The John Deere 1990 CCS™ (Central Commodity System) features metering gates at each individual
John Deere Tractor PIN Locations
Serial Numbers 40
John Deere PIN Decoder – Where is the Serial Number Plate & How to Identify?
The Product Identification Number (PIN) / Serial Number plate on John Deere equipment contains