Contents
Engine Details
| Net Power | 97 hp (72.4 kw) |
| Displacement | 268 cu in (4.4 L) |
| Bore | 4.2 in (105 mm) |
| Stroke | 5 in (127 mm) |
| Emissions | Engine meets US EPA Tier 4 Final/EU Stage IV emission standards. |
| Engine Model | Cat C4.4 ACERT |
| Rated Net Power – Iso 9249 | 97 hp (72.4 kw) |
| Note | Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator. |
| Maximum Gross Power – Sae J1995 | 102 hp (76.1 kw) |
| Maximum Gross Power – Iso 14396 | 100 hp (74.6 kw) |
| Maximum Gross Power | 100 hp (74.6 kw) |
| Maximum Gross Power – Iso 14396 (Din) | 101 hp (75.4 kw) |
| Maximum Gross Torque – Iso 14396 | 332 lb ft (450.2 Nm) |
| Maximum Net Torque – Sae J1349 | 325 lb ft (440.7 Nm) |
| Rated Net Power – Sae J1349 | 96 hp (71.6 kw) |
| Rated Net Power – Iso 9249 (Din) | 98 hp (73.1 kw) |
| Maximum Gross Torque – Sae J1995 | 336 lb ft (455.6 Nm) |
| Maximum Net Torque – Iso 9249 | 329 lb ft (446.1 Nm) |
| Maximum Gross Power – Maximum Engine Speed | 2350 rpm |
| Rated Net Power – Rated Engine Speed | 2200 rpm |
Operational Specs
| Operating Weight | 19315 lb (8761.2 kg) |
Transmission
| Note | *Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1. |
Steering
| Maximum Working Pressure – Steering Pump | 3263 psi |
| Steering Articulation Angle – Each Direction | 40 degrees |
| Number Of Steering Wheel Turns – Full Left To Full Right Or Full Right To Full Left | 3.75 turns |
| Maximum Flow – Steering Pump | 22 gal/min |
| Steering Cycle Times – Full Left To Full Right – At 2,350 Rpm: 90 Rpm Steering Wheel Speed | 2.8 s |
Transmission
| Forward And Reverse – Low Range, Speed Range 1* | 6.3 mph (10.2 km/h) |
| Forward And Reverse – Low Range, Speed Range 2* | 12.5 mph (20.2 km/h) |
| Forward And Reverse – High Range | 25 mph (40.3 km/h) |
Tires
| Note (1) | Other tire choices are available. Contact your Cat dealer for details. |
| Note (2) | In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities. |
| Note (3) | CAT recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model. |
| Standard Size | 17.5-25 12PR |
| Other Choices Include | 17.5-25 12PR L2; 17.5-R25 XHA * L3; 17.5-R25 * L2/L3 PC RM; 17.5-25 16PR L3, 3PC Rim; 17.5-25 GY L2/L3; 17.5-25 12PR L2, SNOW; Flexport |
Buckets
| Bucket Capacities | 1.3-1.9 m3 (1.7-2.5 yd3) |
Axles
| Front | Fixed; Locking differential (standard) |
| Rear | Oscillating 11 degrees; Locking differential (Standard) |
Operating Specifications
| Rated Bucket Capacity | 2.5 yd3 (2 m3) |
Service Refill Capacities
| Cooling System | 5.7 gal (21.6 L) |
| Fuel Tank Capacity | 40.7 gal (154.1 L) |
| Hydraulic Tank | 14.5 gal (54.9 L) |
| Hydraulic System – Including Tank | 25.9 gal (98.1 L) |
| Engine Crankcase | 2.3 gal (8.8 L) |
| Transmission | 0.9 gal (3.5 L) |
| Note | DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. |
| Axles – Front Center Differential | 2 gal (7.6 L) |
| Axles – Rear Center Differential | 2 gal (7.6 L) |
| Diesel Exhaust Fluid (Def) Tank | 5 gal (19 L) |
Cab
| ROPS | ISO 3471:2008 |
| FOPS | ISO 3449:2005 Level II |
| Note (1) | Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe. |
| Note (2) | The declared dynamic operator sound pressure levels per ISO 6396:2008*, when properly installed and maintained, is 77 dB(A). |
| Note (3) | The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC is 103 dB(A). |
| Note (4) | *The measurements were conducted with the cab doors and windows closed. |
Loader Hydraulic System
| Maximum Flow – Implement Pump | 39 gal/min |
| Maximum Working Pressure – Implement Pump | 4061 psi |
| Maximum Flow – Implement Pump – 3rd Function, Maximum Flow, High | 32 gal/min |
| Maximum Flow – Implement Pump – 4th Function, Maximum Flow | 24 gal/min |
| Relief Pressure – Tilt Cylinder | 4931 psi |
| Relief Pressure – Tilt Cylinder – 3rd Function Maximum Working Pressure | 3046 psi |
| Relief Pressure – Tilt Cylinder – 4th Function Maximum Working Pressure | 3046 psi |
| Hydraulic Cycle Time – Raise, Ground Level To Maximum Lift | 5.2 s |
| Hydraulic Cycle Time – Dump, At Maximum Reach | 1.4 s |
| Hydraulic Cycle Time – Rackback | 2.2 s |
| Hydraulic Cycle Time – Float Down, Maximum Lift To Ground Level | 3.7 s |
| Hydraulic Cycle Time – Total Cycle Time | 12.5 s |
| Maximum Flow – Implement Pump – 3rd Function, Maximum Flow, Standard | 24 gal/min |
