Home » Telehandlers » Gradall Telehandlers » Gradall 534D10-45 Telehandler

Gradall 534D10-45 Telehandler

Contents
  1. Dimensions
  2. Lift
  3. Engine Details
  4. Operational Specs
  5. Transmission
  6. Hydraulic

Dimensions

Length To Fork Face 19.72 ft in (6010 mm)
Ground Clearance 19.3 ft in (490 mm)
Width Over Tires 8.21 ft in (2500 mm)
Overall Height 7.75 ft in (2360 mm)
Wheelbase 11.23 ft in (3420 mm)
Turning Radius Outside Tires 14.57 ft in (4440 mm)

Lift

Max Lift Height 45 ft in (13716 mm)
Max Forward Reach 31.5 ft in (9601.2 mm)
Max Load At Max Reach 3000 lb (1360.78 kg)
Max Load At Max Height 7000 lb (3175.15 kg)
Max Lift Capacity 10000 lb (4535.93 kg)

Engine Details

Number Of Cylinders 4
Engine Make John Deere
Engine Model e 4045TF275
Gross Power 114 hp (85 kw)
Torque Measured @ 2500 rpm
Displacement 274.7 cu in (4.5 L)
Aspiration Turbocharged

Operational Specs

Operating Weight 25300 lb (11475.9 kg)
Fuel Tank Capacity 38.1 gal (144 L)
Hydraulic System Fluid Capacity 40.1 gal (151.6 L)
Operating Voltage 12 V
Alternator Supplied Amperage 65 amps
Drawbar Pull 21000 lb (9525.5 kg)
Tire Size 14.00×24-12PR

Transmission

Max Speed – Forward 19 mph (30.6 km/h)

Hydraulic

Pump Type single-section gear pump
Relief Valve Pressure 6300 psi (43437 kPa)
Ask a question

You may also like
JLG DTCs for MEWPs, Boom Lifts and Telehandlers
Error Codes 15
JLG Error Codes List – Diagnostic Fault / Trouble Codes (DTCs) for MEWPs / Lifts / Telehandlers
Effective troubleshooting and timely maintenance of JLG mobile elevating work platforms (MEWPs) and telehandlers
How Much Weight Can a Bulldozer Pull?
Guides 3
How Much Weight Can a Bulldozer Push?
The weight a bulldozer can push depends on various factors, including its size, engine
Massey Ferguson Dash Control Center / DCC / Instrument Panel
Massey Ferguson 8
Massey Ferguson Error Codes List / MF Fault DTCs
Massey Ferguson Diagnostic Trouble Codes (DTCs) are alphanumeric codes generated by the onboard diagnostic
New Holland Instrument Control Unit Error Codes
CNH Industrial 0
Case IH & New Holland Instrument Control Unit / ICU / EIC Error Codes
In the world of modern farming machinery, the Instrument Control Unit (ICU) is the
Massey Ferguson DTC Fault Codes List
Massey Ferguson 0
Massey Ferguson DTC Fault Codes List: 00.0.30 – 10.X.26
This page provides a list of Massey Ferguson DTCs numbered 00.0.30 through 10.X.26, which
New Holland MFD Differential Errors
CNH Industrial 0
New Holland & Case IH List of MFD / Differential Errors (Codes)
Understanding MFD/Differential Error Codes is essential for maintaining the performance, maneuverability, and reliability of