Contents
Dimensions
| Blade Dig Depth* | 20.8 in (528.33 mm) |
| Blade Lift Height* | 56.1 in (1424.94 mm) |
| Blade Width – Standard | 105.4 in (2677.16 mm) |
| Blade Width – Wide | 123.5 in (3136.9 mm) |
| Ground Clearance* | 21.7 in (551.18 mm) |
| Ground Level To Axle Centerline* | 33.21 in (843.28 mm) |
| Ground Level To Top Arch/Boom* – Cable | 109.6 in (2783.84 mm) |
| Ground Level To Top Arch/Boom* – Dual Function | 177.8 in (4516.12 mm) |
| Height – Top Of Cab* | 133.31 in (3385.82 mm) |
| Overall Length – Cable | 298.61 in (7584.44 mm) |
| Overall Length – Dual Function | 347.5 in (8826.5 mm) |
| Overall Width – 30.5l-32 | 133.31 in (3385.82 mm) |
| Overall Width – 30.5l-32 2x Ring | 126.6 in (3215.64 mm) |
| Overall Width – 30.5l-32 Noaw | 126.6 in (3215.64 mm) |
| Overall Width – 35.5l-32 | 145.81 in (3703.32 mm) |
| Overall Width – 35.5l-32 Noaw | 139.1 in (3533.14 mm) |
| Weight – Cable | 42665 lb (19352.52 kg) |
| Weight – Dual Function | 46717 lb (21190.48 kg) |
| Wheel Base | 12.93 ft in (0.33 m) |
Engine Details
| Number Of Cylinders | 6 |
| Gross Power | 250 hp (186.5 kw) |
| Displacement | 428 cu in (7.1 L) |
| Bore | 4.2 in (105 mm) |
| Stroke | 5.4 in (134.9 mm) |
| Engine Model | Cat C7.1 ACERT |
| Derating Altitude | 9843 ft in (3000.2 m) |
| Electrical System | 24V |
| Battery Quantity | 2 |
| Battery – Volts | 12V |
| Battery Capacity | 950 CCA |
| Maximum Torque At Rated Speed | 922 N-m at 1,400 RPM |
Power Train
| Travel Speed – Forward 1 | 3.5 mph (5.7 km/h) |
| Travel Speed – Forward 2 | 4.7 mph (7.6 km/h) |
| Travel Speed – Forward 3 | 6.5 mph (10.5 km/h) |
| Travel Speed – Forward 4 | 8.8 mph (14.2 km/h) |
| Travel Speed – Reverse 1 | 3.5 mph (5.7 km/h) |
| Travel Speed – Reverse 2 | 6.5 mph (10.5 km/h) |
| Travel Speed – Reverse 3 | 11.8 mph (19 km/h) |
| Transmission Cooler Type | Water to Oil |
| Transmission | Countershaft Powershift |
| Travel Speed – Forward 6 | 12.4 mph (20 km/h) |
| Travel Speed – Forward 5 | 11.8 mph (19 km/h) |
Hydraulic System
| Pump Type | Variable displacement piston pump |
| Hydraulic System Type | Load sense, closed center |
| Pump Output | 58 gal/min |
Brakes
| Service | Enclosed wet single disc |
| Transmission Cooler Type | Spring applied, hydraulically released |
Service Refill
| Fuel Tank Capacity | 99.8 gal (377.8 L) |
| Differential – Final Drives – Front | 13.7 gal (51.9 L) |
| Differential – Final Drives – Rear | 13.7 gal (51.9 L) |
| Transmission – Torque Converter | 14.3 gal (54.2 L) |
| Cooling System | 15.1 gal (57.2 L) |
| Engine Oil | 7.1 gal (26.9 L) |
| Differential – Final Drives – Tank | 17.2 gal (65.2 L) |
| Differential – Final Drives – Total | 32.5 gal (123.1 L) |
| Def Tank | 5 gal (19 L) |
| Parking Brake | 0.2 gal (0.5 L) |
Grapple Dimensions
| Grapple Capacity | 19 ft2 (1.8 m2) |
| Tip To Tip Height | 35 in (889 mm) |
| Tong Ppening | 135 in (3429 mm) |
| Full Open Height | 74 in (1879.6 mm) |
| Minimum Stem Diameter | 9.5 in (241.3 mm) |
| Full Closed Height | 58 in (1473.2 mm) |
Lift Chart
| Lift Height, Retracted – Dual Function | 118.3 in (3004.9 mm) |
| Lift Height, Furthest – Dual Function | 86.6 in (2199.7 mm) |
| Lift Lowest, Retracted – Dual Function | 44.3 in (1125.3 mm) |
| Lift Lowest, Furthest – Dual Function | 14.9 in (378.5 mm) |
| Ground Level To Axle Centerline* – Dual Function | 33.2 in (843.3 mm) |
| Reach – Highest, Retracted – Dual Function | 64 in (1625.6 mm) |
| Reach – Lowest, Retracted – Dual Function | 74.1 in (1882.2 mm) |
| Reach – Lowest, Furthest – Dual Function | 112.7 in (2862.6 mm) |
| Reach – Highest, Furthest – Dual Function | 118.4 in (3007.4 mm) |
Winch – Logging Winch
| Maximum Line Pull – Bare Drum | 40016 lb ft (54254.5 Nm) |
| Maximum Line Speed | 280 ft/min |
| Drum Capacity – 19.0 Mm (3/4 In) | 195 ft in (59.5 m) |
| Drum Capacity – 25.4mm (1 In) | 85 ft in (26 m) |
| Drum Diameter | 9 in (228.6 mm) |
| Drum Width | 10 in (254 mm) |
| Winch – Logging Winch Type | Hydraulically driven |
Winch – Retrival Winch
| Winch – Retrival Winch Type | Hydraulically driven |
| Maximum Line Speed | 134 ft/min |
| Drum Capacity – 19.0 Mm (3/4 In) | 195 ft in (59.5 m) |
| Drum Capacity – 25.4 Mm (1 In) | 85 ft in (26 m) |
| Maximum Line Pull – Bare Drum | 40016 lb ft (54254.5 Nm) |
| Drum Diameter | 9 in (228.6 mm) |
| Drum Width | 10 in (254 mm) |
