Contents
Dimensions
| Length With Bucket | 10.58 ft in (3233 mm) |
| Width Over Tires | 5 ft in (1525 mm) |
| Ground Clearance | 8 in (203.2 mm) |
| Height To Top Of Cab | 6.42 ft in (1950 mm) |
| Wheelbase | 3.25 ft in (986 mm) |
| Length W/O Bucket | 8.25 ft in (2519 mm) |
| Clearance At Max Lift And Dump | 7.08 ft in (2169 mm) |
| Reach At Max Lift And Dump | 20 in (505 mm) |
| Length – Without Bucket | 99 in (2514.6 mm) |
| Maximum Dump Angle | 40 degrees |
| Maximum Overall Height | 146 in (3708.4 mm) |
| Rack Back Angle – Maximum Height | 96.7 degrees |
| Reach – Maximum Lift/Dump | 20 in (508 mm) |
| Maximum Reach – With Arms Parallel | 50.4 in (1280.17 mm) |
| Bucket Pin Height – Carry Position | 9.31 in (236.22 mm) |
| Bucket Pin Height – Maximum Lift | 9.34 ft in (0.24 m) |
| Bumper Overhang – Rear Axle | 38 in (965.2 mm) |
| Clearance At Maximum Lift And Dump | 85 in (2159 mm) |
| Departure Angle | 26 degrees |
| Height – Top Of Cab | 6.42 ft in (0.17 m) |
| Length – With Bucket On Ground | 127 in (3225.8 mm) |
| Turning Radius From Center – Inc Bucket | 76.41 in (1940 mm) |
| Turning Radius From Center – Machine Rear | 58.5 in (1485 mm) |
| Vehicle Width Over Tires | 60 in (1524 mm) |
| Wheel Base | 3.25 ft in (0.09 m) |
| Turn Radius From Center – Bucket | 76.41 in (1940.56 mm) |
| Turn Radius From Center – Coupler | 47.2 in (1198.89 mm) |
| Turn Radius From Center – Rear | 58.5 in (1485.9 mm) |
Operating Specifications
| Rated Operating Capacity With Optional Counterweight | 1500 lb (680.39 kg) |
| Tipping Load | 2800 lb (1270.06 kg) |
| Breakout Force – Tilt Cylinder | 4083 lb (1852.02 kg) |
| Rated Operating Capacity | 1400 lb (635.03 kg) |
Engine Details
| Engine Make | CAT |
| Engine Model | 3024C |
| Gross Power | 51 hp (38.1 kw) |
| Net Power | 49 hp (37 kw) |
| Displacement | 134 cu in (2.2 L) |
| Bore | 3.3 in (83.9 mm) |
| Stroke | 3.9 in (99.1 mm) |
| Gross Power – Sae J1995 | 51 hp (38.1 kw) |
| Engine Model | Cat C2.2 |
| Net Power – Sae 1349 | 47 hp (35.1 kw) |
| Net Flywheel Power | 47 hp (35.1 kw) |
Operational Specs
| Operational Weight | 5609 lb (2581 kg) |
| Fuel Tank Capacity | 15.4 gal (58 L) |
| Cooling System Fluid Capacity | 2.6 gal (10 L) |
| Engine Oil Fluid Capacity | 2.6 gal (10 L) |
| Max Speed | 7 mph (11.3 km/h) |
| Hydraulic System Fluid Capacity | 14.5 gal (55 L) |
| Chain Box Fluid Capacity – Each Side | 1.6 gal (6 L) |
Power Train
| Travel Speed Forward | 7 mph (11.3 km/h) |
| Travel Speed Reverse | 7 mph (11.3 km/h) |
Loader
| Breakout Force | 4083 lb (1852 kg) |
| Operating Load Rating | 1400 lb (635 kg) |
| Tipping Angle | 2800 degrees |
Weights
| Operating Weight | 5609 lb (2544.2 kg) |
Hydraulic
| Pump Flow Capacity | 15.6 gal/min (60 L/min) |
| Relief Valve Pressure | 3335 psi (23000 kPa) |
Hydraulic System
| Hydraulic Power | 30.4 hp (22.7 kw) |
| Loader Hydraulic Pressure | 3335 psi |
| Loader Hydraulic Flow | 15.6 gal/min |
| Hydraulic Flow | Standard |
Service Refill Capacities
| Cooling System | 2.6 gal (9.9 L) |
| Fuel Tank Capacity | 15.4 gal (58.3 L) |
| Hydraulic Tank | 9.2 gal (34.9 L) |
| Engine Crankcase | 2.6 gal (9.9 L) |
| Hydraulic System | 14.5 gal (54.9 L) |
| Chain Box – Each Side | 1.6 gal (6.1 L) |
Cab
| ROPS | SAE J1040 MAY94, ISO 3471:1994 |
| FOPS | SAE J1043 SEPT87, ISO 3449:1992 Level I |
| FOPS Level Ii | SAE J231 JAN81, ISO 3449:1992 Level II |
