Home » Tandem Drum Rollers » CAT Tandem Rollers » CAT CB16 Tandem Roller

CAT CB16 Tandem Roller

Contents
  1. Dimensions
  2. Operating Specifications
  3. Engine Details
  4. Weights
  5. Service Refill Capacities
  6. Travel Speeds
  7. Vibratory System

Dimensions

Overall Length 15.5 ft in (4724.4 mm)
Overall Width 7.67 ft in (2336.81 mm)
Height – With ROPS/FOPS 120 in (3048 mm)
Wheel Base 11.25 ft in (3.43 m)

Operating Specifications

Ground Clearance 0.96 ft in (0.03 m)
Maximum Compaction Width 90 in (2286 mm)
Drum Offset 6 in (152.4 mm)
Curb Clearance 28 in (711.2 mm)
Standard Compaction Width 84 in (2133.6 mm)

Engine Details

Gross Power 142 hp (105.9 kw)
Engine Model Cat______ C4.4 with ACERT Technology

Weights

Standard – Operating Weight 31941 lb (14488.2 kg)
Static Linear Load 204 lb/in
Maximum Operating Weight 34255 lb (15537.9 kg)

Service Refill Capacities

Fuel Tank Capacity 66 gal (249.9 L)
Water Spray Tank Capacity 264 gal (999.4 L)

Travel Speeds

Low 4.5 mph (7.3 km/h)
High 8 mph (12.9 km/h)

Vibratory System

Centrifugal Force Per Drum – Maximum 31069 lb (14092.7 kg)
Maximum Amplitude 0.1 in (1.1 mm)
Minimum Amplitude 0.1 in (0.3 mm)
Centrifugal Force Per Drum – Minimum 12409 lb (5628.7 kg)
Vibration Selection Independent per drum, front only, rear only, both
Maximum Frequency 3800 V/m
Minimum Frequency 2520 V/m
Ask a question

You may also like
Cat 270 Skid Steer Loader with SR321 Snow Blower
CAT 0
Cat SR321 Snow Blower
The SR321 is a heavy-duty snow-blower built to pair with skid steers, compact track
Komatsu Dozer Size Chart and Specs
Guides 0
Komatsu Dozer Size Chart: Small, Medium, Large, & Mining Bulldozers Specs
This chart provides detailed information on various Komatsu dozer models across different size categories,
New Holland and Case IH Tractor Multifunction Controller Errors
CNH Industrial 0
New Holland & Case IH Tractor Multifunction Controller Errors
Modern tractors have transformed into intricate systems powered by multifunction controllers. These controllers are
Massey Ferguson DTC Fault Codes List
Massey Ferguson 0
Massey Ferguson DTC Fault Codes List: 00.0.30 – 10.X.26
This page provides a list of Massey Ferguson DTCs numbered 00.0.30 through 10.X.26, which
New Holland Dash Symbols and Warning Lights
Guides 12
New Holland Dashboard Symbols, Indicators, Warning Lights & Gauges Meaning
New Holland dashboard symbols, indicators, warning lights and gauges provide crucial information to operators
New Holland Tractor Engine DTC Fault Codes
CNH Industrial 10
New Holland & Case IH Engine Errors (Diagnostic Trouble Codes)
In the world of agriculture, where fields stretch to the horizon and the hum