Home » Tandem Drum Rollers » CAT Tandem Rollers » CAT CB15 Tandem Roller

CAT CB15 Tandem Roller

Contents
  1. Dimensions
  2. Operating Specifications
  3. Engine Details
  4. Weights
  5. Service Refill Capacities
  6. Travel Speeds
  7. Vibratory System

Dimensions

Overall Length 15.5 ft in (4724.4 mm)
Overall Width 7.67 ft in (2336.81 mm)
Height – With ROPS/FOPS 120 in (3048 mm)
Wheel Base 11.25 ft in (3.43 m)

Operating Specifications

Ground Clearance 0.96 ft in (0.03 m)
Maximum Compaction Width 90 in (2286 mm)
Drum Offset 6 in (152.4 mm)
Curb Clearance 28 in (711.2 mm)
Standard Compaction Width 84 in (2133.6 mm)

Engine Details

Gross Power 142 hp (105.9 kw)
Engine Model Cat__ C4.4 with ACERT Technology

Weights

Standard – Operating Weight 28958 lb (13135.2 kg)
Static Linear Load 181 lb/in
Maximum Operating Weight 30391 lb (13785.2 kg)

Service Refill Capacities

Fuel Tank Capacity 66 gal (249.9 L)
Water Spray Tank Capacity 264 gal (999.4 L)

Travel Speeds

Low 4.5 mph (7.3 km/h)
High 8 mph (12.9 km/h)

Vibratory System

Centrifugal Force Per Drum – Maximum 31069 lb (14092.7 kg)
Maximum Amplitude 0.1 in (1.1 mm)
Minimum Amplitude 0.1 in (0.3 mm)
Centrifugal Force Per Drum – Minimum 12409 lb (5628.7 kg)
Vibration Selection Independent per drum, front only, rear only, both
Maximum Frequency 3800 V/m
Minimum Frequency 2520 V/m
Ask a question

You may also like
John Deere 1835 Air Hoe Drill Specs
John Deere 0
John Deere 1835 Air Drill
The John Deere 1835 Air Hoe Drill is a high-performance seeding solution designed to
New Holland and Case IH Tractor Error Codes
CNH Industrial 0
FAQ for New Holland & Case IH Tractor Fault Codes / DTCs
Modern agriculture relies on cutting-edge technology, and Case IH & New Holland tractors are
John Deere Operations Center Key Features
Guides 3
Getting Started with John Deere Operations Center for Precision Ag
The John Deere Operations Center is a comprehensive online farm management system that facilitates
John Deere Tractor PIN Locations
Serial Numbers 34
John Deere PIN Decoder – Where is the Serial Number Plate & How to Identify?
The Product Identification Number (PIN) / Serial Number plate on John Deere equipment contains
JLG DTCs for MEWPs, Boom Lifts and Telehandlers
Error Codes 15
JLG Error Codes List – Diagnostic Fault / Trouble Codes (DTCs) for MEWPs / Lifts / Telehandlers
Effective troubleshooting and timely maintenance of JLG mobile elevating work platforms (MEWPs) and telehandlers
Massey Ferguson DTC Codes List
Massey Ferguson 0
Massey Ferguson DTC Codes List: 04.02.E6 – 06.X.1A
Massey Ferguson Diagnostic Trouble Codes (DTC) are alphanumeric codes generated by the onboard diagnostic