Dimensions
| Overall Length | 350 in (8890 mm) |
| Wheelbase | 20.21 ft in (6160 mm) |
| Blade Base | 8.44 ft in (2570 mm) |
| Frame Circle Diameter | 5 ft in (1524 mm) |
| Height Over ROPS | 10.44 ft in (3180 mm) |
| Hydraulic Blade Tip – Forward | 42 |
| Hydraulic Blade Tip – Rearward | 5 |
| Moldboard – Lift Above Ground | 19.3 in (490 mm) |
| Moldboard Height | 2.01 ft in (610 mm) |
| Moldboard Sideshift – Left | 2.25 ft in (683 mm) |
| Moldboard Sideshift – Right | 2.25 ft in (683 mm) |
| Shoulder Reach – Left | 6.84 ft in (2083 mm) |
| Shoulder Reach – Right | 6.84 ft in (2083 mm) |
| Thickness – Moldboard | 0.08 ft in (22 mm) |
| Turning Radius – Minimum | 23.66 ft in (7.21 m) |
| Bank Angle | 90 |
| Width – Moldboard | 12.01 ft in (3660 mm) |
| Circle Rotation | 360 |
| Frame Articulation | 22 |
Engine Details
| Engine Model | PowerTech PSS 9.0L |
| Displacement | 549.3 cu in (9 L) |
| Engine Make | John Deere |
| Engine Output – Net | 234.7 hp (175 kw) |
| Torque Rise | 67 % |
| Service Brake Type | Multiple Wet Discs |
| Number Of Speeds – Forward | 8 |
| Number Of Speeds – Reverse | 8 |
| Number Of Cylinders | 6 |
| Service Brake Actuation | Hydraulic |
| Tire Size – Standard | 14.00 – 24 |
| Transmission Manufacturer | John Deere |
Capacities
| Fuel Tank – Diesel | 110.1 gal (416.5 L) |
| Hydraulic Tank | 16 gal (60.5 L) |
Performance
| System Voltage | 24 V |
| Pump Flow | 56.1 gal/min (212 L/min) |
| Relief Pressure | 2750 psi (18960.6 kPa) |
| Loading – Front Axle | 9211 lb (4178 kg) |
| Loading – Rear Axle / Tandem | 26010 lb (11798 kg) |
| Speed 8 – Fwd | 45.5 (28.3) |
| Speed 8 – Rev, Kph (Mph) | 45.5 (28.3) |
Weights
| Weight With Push Block & Ripper | 42339.8 lb (19205 kg) |
