Engine Details
| Number Of Cylinders | 12 |
| Torque Rise | 19 % |
| Displacement | 1648 cu in (27.1 L) |
| Bore | 5.4 in (137.2 mm) |
| Stroke | 6 in (152.4 mm) |
| Emissions | Tier 4 Final/Stage IV or Equivalent to Tier 2/Stage II |
| Engine Model | Cat C27 ACERT |
| Note (1) | Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture. |
| Note (2) | Optimized VHP Plus is standard for the 24. |
| Note (3) | Net power advertised is the power available at rated speed of 1,800 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. |
| Note (4) | Power as declared per ISO 14396. Rated rpm 1,800 (561 hp) |
| Base Power (1st Gear) – Net | 535 hp (399 kw) |
| Standard Capability | 122 degrees |
| Speed At Rated Power | 1,800 rpm |
| Maximum Altitude – Full Power (Tier 2) | 15000 ft in (4572 m) |
| Peak Net Torque | 2417 lb ft (3277.1 Nm) |
| Base Power (1st Gear) – Net (Tier 4) | 535 hp (399 kw) |
| Maximum Altitude – Full Power (Tier 4) | 10000 ft in (3048 m) |
| Standard – Fan Speed | 1,300 rpm |
Weights
| Note | *Base operating weight calculated on standard machine configuration with 29.5R29 tires, full fuel tank, operator and ROPS cab. |
| Gross Vehicle Weight – Typically Equipped – Rear Axle | 117229 lb (53174.2 kg) |
| Gross Vehicle Weight – Typically Equipped – Front Axle | 44466 lb (20169.5 kg) |
| Gross Vehicle Weight – Typically Equipped – Total | 161695 lb (73343.7 kg) |
| Operating Weight – Typically Equipped | 161695 lb (73343.7 kg) |
| Gross Vehicle Weight – Base* – Total | 157769 lb (71562.9 kg) |
| Gross Vehicle Weight – Base* – Front Axle | 43858 lb (19893.7 kg) |
| Gross Vehicle Weight – Base* – Rear Axle | 113910 lb (51668.8 kg) |
Moldboard
| Blade Width | 24 ft in (7.4 m) |
| Thickness | 2 in (50.8 mm) |
| Blade Height | 40 in (1016 mm) |
Air Conditioning System
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.0 kg of refrigerant which has a CO2 equivalent of 2.860 metric tonne. |
Blade Range
| Circle Centershift – Right | 17.2 in (436.9 mm) |
| Circle Centershift – Left | 31.7 in (805.2 mm) |
| Moldboard Sideshift – Right | 45.3 in (1150.7 mm) |
| Moldboard Sideshift – Left | 38.2 in (970.3 mm) |
| Blade Tip Range – Forward | 40 degrees |
| Blade Tip Range – Backward | 0 degrees |
| Maximum Lift Above Ground | 16.1 in (409 mm) |
| Maximum Depth Of Cut | 21.7 in (551.2 mm) |
| Maximum Shoulder Reach Outside Of Rear Tires – Right | 125 in (3175 mm) |
| Maximum Shoulder Reach Outside Of Rear Tires – Left | 125 in (3175 mm) |
Front Frame Structure
| Circle – Outer Diameter | 104 in (2641.6 mm) |
| Front Axle – Wheel Lean – Left/Right | 18 degrees |
| Front Axle – Total Oscillation Per Side | 32 degrees |
