Contents
Dimensions
| Overall Length | 28.94 ft in (8820 mm) |
| Width Over Tires | 8.24 ft in (2511 mm) |
| Wheelbase | 19.42 ft in (5917 mm) |
| Rear Ground Clearance | 1.15 ft in (348 mm) |
| Tandem Axle Wheelbase | 4.96 ft in (1510 mm) |
| Blade Base | 98.8 in (2510 mm) |
| Height To Top Of Isomount Cab | 10.86 ft in (3308 mm) |
Engine Details
| Torque | 692.6 lb ft (939 Nm) |
| Number Of Cylinders | 6 |
| Engine Model | C7.1 ACERT |
| Net Power Gear 1-2 | 145 hp (108.2 kw) |
| Power Measured @ | 2100 rpm |
| Displacement | 427.8 cu in (7.1 L) |
| Bore | 4.2 in (105 mm) |
| Stroke | 5.4 in (135 mm) |
Operational Specs
| Std Operation Weight – Front Axle | 10563 lb (4791.3 kg) |
| Std Operation Weight – Rear Axle | 29329 lb (13303.5 kg) |
| Hydraulic System Fluid Capacity | 17 gal (64 L) |
| Std Operation Weight – Total | 39892 lb (18094.8 kg) |
| Max Operation Weight – Front Axle | 15675 lb (7110.1 kg) |
| Max Operation Weight – Rear Axle | 33312 lb (15110.1 kg) |
| Oil System Fluid Capacity | 8 gal (30 L) |
| Max Operation Weight – Total | 48987 lb (22220.2 kg) |
| Fuel Tank Capacity | 99.9 gal (378 L) |
| Cooling System Fluid Capacity | 13 gal (49 L) |
| Rear Diff/Final Drive Fluid Capacity | 16.6 gal (62.5 L) |
| Circle Gearbox Fluid Capacity | 1.9 gal (7 L) |
| Tandem Case Fluid Capacity (Each) | 15.6 gal (59 L) |
| Tire Size | 17.5 R25 |
Steering
| Articulation Angle | 20 degrees |
| Turning Radius | 24.3 ft in (7.5 m) |
Transmission
| Transmission Type | Direct Drive, Powershift |
| Number Of Gears – Forward | 8 |
| Number Of Gears – Reverse | 6 |
| Max Speed – Forward | 28.4 mph (45.7 km/h) |
| Max Speed – Reverse | 22.5 mph (36.1 km/h) |
Front Axle
| Wheel Lean | 18 degrees |
| Oscillation – Total | 32 degrees |
| Ground Clearance | 1.9 ft in (572 mm) |
Moldboard
| Moldboard Width | 12 ft in (3657.6 mm) |
| Moldboard Height | 24 in (609.6 mm) |
| Moldboard Thickness | 0.9 in (22.1 mm) |
| Max Depth Of Cut | 28.4 in (720 mm) |
| Side Shift Left | 20.1 in (510 mm) |
| Side Shift Right | 26 in (660 mm) |
| Blade Pull At Max Weight | 29980.7 lb (13599 kg) |
| Blade Down Pressure | 27236 lb (12354 kg) |
Hydraulic System
| Pump Type | Variable Piston |
| Pump Flow | 55.7 gal/min (210.9 L/min) |
| Relief Valve Pressure | 3500 psi (24100 kPa) |
Circle
| Diameter | 60.3 in (1530 mm) |
| Rotation | 360 degrees |
| Shift Left | 25.9 in (656 mm) |
| Shift Right | 25.9 in (656 mm) |
| Max Reach Outside Tires – Left | 68.6 in (1742 mm) |
| Max Reach Outside Tires – Right | 75 in (1905 mm) |
| Max Lift Above Ground | 16.9 in (427 mm) |
| Blade Tip Angle – Front | 40 degrees |
| Blade Tip Angle – Rear | 5 degrees |
