Contents
- Dimensions
- Dump
- Engine Details
- Operational Specs
- Transmission
- Steering
- Weights
- Tires
- Brakes
- Body Hoists
- Final Drives
- Operating Specifications
- Service Refill Capacities
- Weight Distributions – Approximate
- Capacity – Dual Slope – 100% Fill Factor
- Capacity – Flat Floor – 100% Fill Factor
- ROPS
- Sound
- Suspension
- Approximate Weights – Dual Slope
- Approximate Weights – Flat Floor
Dimensions
| Overall Length | 30.21 ft in (9208.01 mm) |
| Overall Width | 14.63 ft in (4457 mm) |
| Overall Height | 14.47 ft in (4410 mm) |
| Wheelbase | 13.75 ft in (4191 mm) |
| Ground Clearance | 2.23 ft in (679.71 mm) |
| Dump Height | 28.86 ft in (8796 mm) |
| Dump Ground Clearance | 2.24 ft in (680 mm) |
| Inside Body Length | 21.45 ft in (6.54 m) |
| Inside Body Width | 13.08 ft in (3.99 m) |
| Centerline Front Tire Width | 10.74 ft in (3.28 m) |
| Centerline Of Rear Dual Tire Width | 9.58 ft in (2.92 m) |
| Loading Height – Empty | 12.83 ft in (3.92 m) |
| Operating Width | 16.65 ft in (5074.92 mm) |
| Overall Body Length | 28.33 ft in (8.64 m) |
| Overall Canopy Width | 15.5 ft in (4.73 m) |
| Overall Height – Body Raised | 28.86 ft in (8.8 m) |
| Overall Tire Width | 13.95 ft in (4.26 m) |
| Rear Axle – Clearance | 2.17 ft in (0.67 m) |
| Wheel Base | 13.75 ft in (4.2 m) |
| Dump Clearance | 2.17 ft in (0.67 m) |
| Engine Guard Clearance | 2.25 ft in (0.69 m) |
| Front Canopy Height | 14.47 ft in (4.42 m) |
| Height – Top Of ROPS | 12.92 ft in (3.94 m) |
| Inside Body Depth – Maximum | 6.25 ft in (1.91 m) |
| Rear Axle – Tail | 9.42 ft in (2.88 m) |
Dump
| Dump Angle | 60 degrees |
| Load Capacity – Heaped | 54.3 yd3 (41.52 m3) |
| Rated Payload | 136488.18 lb (61910 kg) |
| Load Capacity – Struck | 41.1 yd3 (31.43 m3) |
Engine Details
| Number Of Cylinders | 12 |
| Engine Make | CAT |
| Engine Model | 3412E |
| Net Power | 730 hp (544.4 kw) |
| Gross Power | 760 hp (566.8 kw) |
| Power Measured @ | 2000 rpm |
| Max Torque | 2542.4 lb ft (3447 Nm) |
| Displacement | 1649 cu in (27.1 L) |
| Torque Rise | 33 % |
| Bore | 5.4 in (137.2 mm) |
| Stroke | 6 in (152.4 mm) |
| Net Power – Cat | 730 hp (544.4 kw) |
| Net Power – Iso 9249 | 730 hp (544.4 kw) |
| Net Power – Sae J1349 | 730 hp (544.4 kw) |
| Net Power – 80/1269/Eec | 730 hp (544.4 kw) |
| Gross Power – Sae J1995 | 760 hp (566.8 kw) |
| Engine Model | Cat 3412E |
| Flywheel Power | 730 hp (544.4 kw) |
| Rated Engine Speed | 2000 rpm |
Operational Specs
| Fuel Tank Capacity | 185 gal (700.4 L) |
| Cooling System Fluid Capacity | 40 gal (151.5 L) |
| Engine Oil Capacity | 18 gal (68.2 L) |
| Diff And Final Drive Fluid Capacity | 41 gal (155.3 L) |
| Steering System Fluid Capacity | 16 gal (60.6 L) |
| Brake/Hoist System Fluid Capacity | 81 gal (306.7 L) |
| Hydraulic System Fluid Capacity | 35 gal (132.5 L) |
| Tire Size | 24.00-R35 (E4) |
Transmission
| Number Of Gears – Forward | 7 |
| Number Of Gears – Reverse | 1 |
| Max Speed | 40.9 mph (65.8 km/h) |
| Reverse | 7.5 mile/h |
| Forward – 1 | 6.2 mph (10 km/h) |
| Forward – 2 | 8.6 mph (13.9 km/h) |
| Forward – 3 | 11.6 mph (18.7 km/h) |
| Forward – 4 | 15.6 mph (25.2 km/h) |
| Forward – 5 | 21.1 mph (34 km/h) |
| Forward – 6 | 28.5 mph (45.9 km/h) |
| Forward – 7 | 41.1 mph (66.2 km/h) |
Steering
| Steering Standards | Meets SAE J1511 FEB94 and ISO 5010:1992 |
| Steer Angle | 31 degrees |
| Turning Circle – Clearance Diameter | 78.9 ft in (24.1 m) |
Weights
| Empty Weight | 67000 lb (30390.7 kg) |
| Loaded Weight | 239000 lb (108408.6 kg) |
| Weight Distribution Front – Empty | 44.3 % |
| Weight Distribution Rear – Empty | 55.7 % |
| Weight Distribution Front – Loaded | 31.2 % |
| Weight Distribution Rear – Loaded | 68.8 % |
Tires
| Standard Tire | Standard: 24.00-R35 (E4) |
Brakes
| Brake Surface – Front | 216 in2 (0.2 m2) |
| Brake Surface – Rear | 9496 in2 (6.2 m2) |
| Brake Standards | ISO 3450:1996 |
Body Hoists
| Pump Flow – High Idle | 148 gal/min |
| Relief Valve Setting – Raise | 2750 psi |
| Body Raise Time – High Idle | 9.5 s |
| Body Lower Time – Float | 12.5 s |
| Relief Valve Setting – Lower | 500 psi |
Final Drives
| Planetary Ratio | 4.80:1 |
| Differential Ratio | 3.64:1 |
| Total Reduction Ratio | 17.48:1 |
Operating Specifications
| Nominal Payload Class (100%) | 140000 lb (63502.9 kg) |
| Top Speed – Loaded | 41.1 mph (66.2 km/h) |
| Body Capacity – Struck | 41.1 yd3 (31.5 m3) |
| Maximum Capacity | 140000 lb (63502.9 kg) |
| Steer Angle | 31 degrees |
| Body Capacity – Sae 2:1 | 54.3 yd3 (41.6 m3) |
Service Refill Capacities
| Cooling System | 40 gal (151.5 L) |
| Differential – Final Drives | 41 gal (155.3 L) |
| Steering Tank | 9 gal (34.1 L) |
| Steering System – Including Tank | 16 gal (60.6 L) |
| Fuel Tank Capacity | 185 gal (700.4 L) |
| Torque Converter – Transmission System – Including Sump | 19 gal (72 L) |
| Torque Converter – Brake – Hoist Hydraulic Tank | 35 gal (132.5 L) |
| Brake Hoist System – Includes Tank | 81 gal (306.7 L) |
Weight Distributions – Approximate
| Front Axle – Empty | 44.3 % |
| Front Axle – Loaded | 31.2 % |
| Rear Axle – Empty | 55.7 % |
| Rear Axle – Loaded | 68.8 % |
Capacity – Dual Slope – 100% Fill Factor
| Struck | 42.8 yd3 (32.8 m3) |
| Heaped 2:1 (Sae) | 53.9 yd3 (41.3 m3) |
Capacity – Flat Floor – 100% Fill Factor
| Struck | 41.1 yd3 (31.5 m3) |
| Heaped 2:1 (Sae) | 54.3 yd3 (41.6 m3) |
ROPS
| ROPS/FOPS Standards | Meets SAE J1040 MAY94 and ISO 3471:1994 |
Sound
| Sound Standards | Meets SAE J88 APR95 |
Suspension
| Rear Axle – Oscillation | 8 degrees |
| Effective Cylinder Stroke – Front | 8.2 in (208.3 mm) |
| Effective Cylinder Stroke – Rear | 5.9 in (149.9 mm) |
Approximate Weights – Dual Slope
| Body | 21400 lb (9706.9 kg) |
Approximate Weights – Flat Floor
| Body | 28814 lb (13069.9 kg) |
