Contents
Dimensions (Approximate)
| Width – Over End Bits – Blade | 17.04 ft in (5.2 m) |
| Blade Width – Straight | 17 ft in (5.19 m) |
| Blade Width – U-Blade | 17.5 in (444.5 mm) |
| Drum Width | 4.7 ft in (1.44 m) |
| Turning Radius – Outside End Bits | 28.54 ft in (8.7 m) |
| Wheel Base | 179.13 ft in (54.6 m) |
| Blade Height – U-Blade | 7.3 in (185.42 mm) |
| Length – With Blade On Ground | 33.41 ft in (10.19 m) |
Operating Specifications
| Ground Clearance | 1.95 ft in (0.6 m) |
| Travel Speed Reverse | 7.1 mph (11.43 km/h) |
| Travel Speed Forward | 6.8 mph (10.95 km/h) |
Engine Details
| Gross Power | 525 hp (391.5 kw) |
| Displacement | 964.2 cu in (15.9 L) |
| Engine Model | Cat 3456 DITA |
| Flywheel Power | 481 hp (358.7 kw) |
Operational Specs
| Operating Weight | 118348 lb (53681.8 kg) |
Transmission
| Forward – 1 | 3.8 mph (6.1 km/h) |
| Forward – 2 | 6.8 mph (10.9 km/h) |
| Reverse – 1 | 4 mph (6.5 km/h) |
| Reverse – 2 | 7.1 mph (11.4 km/h) |
Axles
| Front | Fixed |
| Oscillating Rear | Oscillates |
Service Refill Capacities
| Cooling System | 24.1 gal (91.1 L) |
| Fuel Tank Capacity | 210 gal (795 L) |
| Crankcase | 15.9 gal (60 L) |
| Hydraulic Tank | 63.4 gal (240 L) |
| Transmission | 22 gal (83.1 L) |
| Differential – Final Drives – Front | 39.1 gal (148.1 L) |
| Differential – Final Drives – Rear | 39.1 gal (148.1 L) |
Straight Blade
| Height | 7.3 ft in (2.3 m) |
| Moldboard – Length | 17.1 ft in (5.2 m) |
| Lift Speed At Rated Rpm | 1.18 ft/s |
| End Bits (2), Self-Sharpening, Length – Each | 18.6 in (472 mm) |
| Cutting Edges (2), Reversible, End Section Length (Each) | 4.7 ft in (1.5 m) |
