Contents
Dimensions (Approximate)
| Blade Width – Straight | 14.9 ft in (4.55 m) |
| Drum Width | 3.9 ft in (1.19 m) |
| Wheel Base | 145.7 ft in (44.41 m) |
| Width – Over End Bits – Blade | 14.8 ft in (4.52 m) |
| Width – Over Wheels | 12.5 ft in (3.81 m) |
| Length – With Blade On Ground | 27.6 ft in (8.42 m) |
Operating Specifications
| Ground Clearance | 1.8 ft in (0.55 m) |
| Travel Speed Reverse | 8.4 mph (13.52 km/h) |
| Travel Speed Forward | 6.9 mph (11.11 km/h) |
Engine Details
| Gross Power | 340 hp (253.6 kw) |
| Displacement | 891 cu in (14.7 L) |
| Engine Model | Cat 3406C TA |
| Flywheel Power | 315 hp (234.9 kw) |
Operational Specs
| Operating Weight | 76805 lb (34838.2 kg) |
Transmission
| Forward – 1 | 3.9 mph (6.3 km/h) |
| Forward – 2 | 7 mph (11.3 km/h) |
| Reverse – 1 | 4.7 mph (7.6 km/h) |
| Reverse – 2 | 8.4 mph (13.6 km/h) |
Axles
| Front | Fixed |
| Oscillating Rear | Oscillating |
Service Refill Capacities
| Cooling System | 21.4 gal (81.1 L) |
| Fuel Tank Capacity | 166.5 gal (630.3 L) |
| Crankcase | 9 gal (34.1 L) |
| Hydraulic Tank | 23.3 gal (88.3 L) |
| Transmission | 16.4 gal (62.1 L) |
| Differential – Final Drives – Front | 23.8 gal (90.1 L) |
| Differential – Final Drives – Rear | 23.8 gal (90.1 L) |
Straight Blade
| Height | 6.3 ft in (2 m) |
| Moldboard – Length | 14.8 ft in (4.6 m) |
| Lift Speed At Rated Rpm | 1.4 ft/s |
| End Bits (2), Self-Sharpening, Length – Each | 18.6 in (472.5 mm) |
| Cutting Edges (2), Reversible, End Section Length (Each) | 5.8 ft in (1.8 m) |
