Home » Forklifts » Yale Forklifts » Yale HDF35 Forklift

Yale HDF35 Forklift

Contents
  1. Dimensions
  2. Mast
  3. Engine Details
  4. Operational Specs

Dimensions

Length To Fork Face 10.04 ft in (3059 mm)
Overall Width 4.67 ft in (1423 mm)
Overall Height – Mast Lowered 72.95 ft in (22235 mm)
Wheelbase 6.57 ft in (2000 mm)
Ground Clearance 9.53 in (242 mm)
Height To Top Of Overhead Guard 7.41 ft in (2256 mm)
Max Fork Height 9.85 ft in (3000 mm)
Turning Radius 9.09 ft in (2770 mm)

Mast

Mast Tip Forward 6 degrees
Mast Tip Rear 12 degrees
Lower Speed 102.4 ft/min (31.22 m/min)
Load Capacity 7000 lb (3175.15 kg)
Load Center 23.63 in (600 mm)
Lift Speed 118.1 ft/min (36 m/min)

Engine Details

Engine Make Hyundai
Engine Model D4DA
Power 90.8 hp (67.7 kw)
Torque 224 lb ft (303.8 Nm)
Power Measured @ 2400 rpm
Displacement 238 cu in (4 L)
Torque Measured @ 1700 rpm

Operational Specs

Operating Weight 12630 lb (5728.9 kg)
Max Speed 16.3 mph (26.3 km/h)
Ask a question

You may also like
Case IH Tractor Front PTO Error List
CNH Industrial 0
New Holland & Case IH Tractor Front PTO Error List
Front Power Take-Off (PTO) systems in tractors are indispensable for running various front-mounted implements.
Massey Ferguson DTC Fault Codes List
Massey Ferguson 0
Massey Ferguson DTC Fault Codes List: 00.0.30 – 10.X.26
This page provides a list of Massey Ferguson DTCs numbered 00.0.30 through 10.X.26, which
Where to Find Kubota Generator Serial Number
Serial Numbers 0
Where to Find Kubota Generator Serial Number & Decode Model Name?
Is it time to schedule maintenance for your Kubota-branded generator? Ensuring prompt and accurate
John Deere 1835 Air Hoe Drill Specs
John Deere 0
John Deere 1835 Air Drill
The John Deere 1835 Air Hoe Drill is a high-performance seeding solution designed to
Dozer Size Chart to Choose the Right Bulldozer for Your Job
Guides 2
Dozer Size Chart to Choose the Right Bulldozer for Your Job
Please note that the specifications and categorizations may vary among different manufacturers and models.
John Deere Armrest Interface Control AIC Error Codes
John Deere 0
John Deere AIC Error Codes / Armrest Interface Control Unit Fault DTCs AIC 000158.03 – 524224.09
The John Deere Armrest Interface Control Error Codes, commonly referred to as John Deere