Home » Forklifts » Crown Forklifts » Crown RC 5510/15-30 Forklift

Crown RC 5510/15-30 Forklift

Contents
  1. Dimensions
  2. Mast
  3. Engine Details
  4. Operational Specs

Dimensions

Length To Fork Face 5.25 ft in (1597.68 mm)
Overall Width 3.5 ft in (1066.8 mm)
Overall Height – Mast Lowered 6.92 ft in (2108.22 mm)
Wheelbase 3.56 ft in (1084.57 mm)
Ground Clearance 3 in (76.2 mm)
Height To Top Of Overhead Guard 7.34 ft in (2235.19 mm)
Max Fork Height 15.84 ft in (4825.99 mm)
Turning Radius 4.31 ft in (1313.17 mm)

Mast

Mast Tip Forward 5 degrees
Mast Tip Rear 3 degrees
Lift Speed 65 ft/min (19.82 m/min)
Max Fork Spread 33 in (838.2 mm)
Lower Speed 90 ft/min (27.44 m/min)
Load Center 24 in (609.6 mm)
Number Of Mast Sections 3
Load Capacity 3000 lb (1360.78 kg)

Engine Details

Fuel Type Electric 36V

Operational Specs

Operating Weight 8330 lb (3778.5 kg)
Tire Type Cushion
Number Of Front Wheels 2
Number Of Rear Wheels 2
Max Speed 7.2 mph (11.6 km/h)
Ask a question

You may also like
John Deere Engine with EPA Tier 4 Final and EU Stage IV Emission Standards
Guides 6
Vehicle Emissions Standards – US EPA Tier, EU Stage (On-Road / Non-Road)
To reduce the environmental and health impacts of diesel engines used in vehicles and
John Deere 1835 Air Hoe Drill Specs
John Deere 0
John Deere 1835 Air Drill
The John Deere 1835 Air Hoe Drill is a high-performance seeding solution designed to
Where to Find Kubota Generator Serial Number
Serial Numbers 0
Where to Find Kubota Generator Serial Number & Decode Model Name?
Is it time to schedule maintenance for your Kubota-branded generator? Ensuring prompt and accurate
John Deere Excavator Dashboard Symbols
Guides 2
Excavator Dashboard Symbols & Warning Lights Meaning
Excavator dashboards feature universal symbols, indicators, switches, and warning lights that provide operators with
JLG DTCs for MEWPs, Boom Lifts and Telehandlers
Error Codes 5
JLG Error Codes List – Diagnostic Fault / Trouble Codes (DTCs) for MEWPs / Lifts / Telehandlers
Effective troubleshooting and timely maintenance of JLG mobile elevating work platforms (MEWPs) and telehandlers
Massey Ferguson DTC Fault Codes List
Massey Ferguson 0
Massey Ferguson DTC Fault Codes List: 00.0.30 – 10.X.26
This page provides a list of Massey Ferguson DTCs numbered 00.0.30 through 10.X.26, which