Dimensions
| Arm Length |
7’11” (2410 mm) / 9’7″ (2925 mm) |
| A. Overall length |
31’2″ (9495 mm) / 30’11” (9425 mm) |
| B. Length on ground (transport) |
19’4″ (5885 mm) / 16’5″ (5000 mm) |
| C. Overall height (to top of boom) |
10’6″ (3190 mm) / 9’9″ (2970 mm) |
| D. Overall width |
10’5″ (3180 mm) |
| E. Overall height (to top of cab) |
10’0″ (3040 mm) |
| F. Ground clearance, counterweight |
3’7″ (1085 mm) |
| G. Ground clearance (minimum) |
1’5″ (440 mm) |
| H. Tail swing radius |
9’0″ (2750 mm) |
| I. Track length on ground |
12’0″ (3665 mm) |
| J. Track length |
14’7″ (4450 mm) |
| K. Track gauge |
7’10” (2380 mm) |
| L. Width of crawler |
10’5″ (3180 mm) |
| M. Shoe width |
31.5″ (800 mm) |
| N. Grouser height |
1.0″ (25 mm) |
| O. Machine cab height |
6’10” (2095 mm) |
| P. Machine cab width |
8’11” (2710 mm) |
| Q. Distance, swing center to rear end |
8’11” (2710 mm) |
Weights
| Shoe Size |
Operating Weight |
Ground Pressure |
| 28″ (700 mm) Triple Grouser Shoes |
46643 lb (21157 kg) |
5.48 psi (37.8 kPa) |
| 31.5″ (800 mm) Triple Grouser Shoes |
47260 lb (21437 kg) |
4.86 psi (33.5 kPa) |
Working Range
| Komatsu PC200LC-8 Arm |
7’11” (2410 mm) |
9’7″ (2925 mm) |
| A. Max. Digging Height |
32’2″ (9800 mm) |
32’10” (10000 mm) |
| B. Max. Dumping Height |
22’7″ (6890 mm) |
23’4″ (7110 mm) |
| C. Max. Digging Depth |
20’0″ (6095 mm) |
21’9″ (6620 mm) |
| D. Max. Vertical Wall Digging Depth |
17’10” (5430 mm) |
19’7″ (5980 mm) |
| E. Max. Digging Depth of Cut for 8′ Level |
19’0″ (5780 mm) |
20’11” (6370 mm) |
| F. Max. Digging Reach |
30’9″ (9380 mm) |
32’5″ (9875 mm) |
| G. Max. Digging Reach at Ground Level |
30’2″ (9190 mm) |
31’10” (9700 mm) |
| H. Min. Swing Radius |
10’2″ (3090 mm) |
10’0″ (3040 mm) |
Working Forces
| Komatsu PC200LC-8 Arm |
7’11” (2410 mm) |
9’7″ (2925 mm) |
| Bucket Digging Force, SAE rating |
31080 lb (138 kN) |
31080 lb (138 kN) |
| Arm Crowd Force, SAE rating |
27780 lb (124 kN) |
22710 lb (101 kN) |
| Bucket Digging Force, ISO rating |
33510 lb (149 kN) |
33510 lb (149 kN) |
| Arm Crowd Force, ISO rating |
28660 lb (127 kN) |
24250 lb (108 kN) |
Buckets
TL, GSK, HP, HPS, HPX buckets for Komatsu PC200LC-8 Excavator
| Minimum Bucket Capacity |
0.7 yd3 (0.5 m3), 24″ (610 mm) |
| Maximum Bucket Capacity |
1.6 yd3 (1.2 m3) , 48″ (1219 mm) |
| Reference Bucket Capacity |
1.34 yd3 (1.02 m3), 42″ (1067 mm) |
Swing Mechanism
| Drive Method |
Hydrostatic drive |
| Swing Reduction |
Planetary gear |
| Swing Circle Lubrication |
Grease-bathed |
| Swing Service Brake |
Hydraulic lock |
| Holding Brake/Swing Lock |
Mechanical disc brake |
| Swing Speed |
12.4 rpm |
| Swing Torque |
49907 lb ft (67.6 kNm) |
Engine Details
| Number Of Cylinders |
6 |
| Engine Make |
Komatsu |
| Engine Model |
Komatsu SAA6D107E-1 |
| Gross Power |
155 hp (116 kw) |
| Net Power |
148 hp (110 kw) |
| Power Measured @ |
2000 rpm |
| Displacement |
408 cu in (6.69 L) |
| Bore |
4.21 in (107 mm) |
| Stroke |
4.88 in (124 mm) |
| Aspiration |
Turbocharged and aftercooled |
| Emission Standards |
US EPA Tier 3 / EU Stage IIIA |
Drive
| Max Drawbar Pull |
40120 lb (178 kN) |
| Steering Control |
2 levers with pedals |
| Drive Method |
Hydrostatic |
| Gradeability |
70%, 35° |
| Max Travel Speed (Low) |
1.9 mph (3.0 km/h) |
| Max Travel Speed (Mid) |
2.5 mph (4.1 km/h) |
| Max Travel Speed (High) |
3.4 mph (5.5 km/h) |
| Service Brake |
Hydraulic lock |
| Parking Brake |
Mechanical disc brake |
Undercarriage
| Center frame |
X-frame |
| Track frame |
Box-section |
| Seal of track |
Sealed track |
| Track adjuster |
Hydraulic |
| Number of Shoes per Side |
49 |
| Number of Carrier Rollers per Side |
2 |
| Number of Track Rollers per Side |
9 |
| Shoe Size |
28 in (700 mm) / 31.5 in (800 mm) |
| Track Gauge |
93.7 in (2380 mm) |
Operational Specs
| Maximum Operating Weight |
47260 lb (21437 kg) |
| Maximum Travel Speed |
3.4 mph (5.5 km/h) |
| Operating Voltage |
24 V |
| Alternator |
60 amps |
| Battery |
2x 12 V, 110 Ah |
| Working Lights |
Boom working light + RH working light + 2 on cab (Optional) |
Hydraulics
| Type |
Closed-center hydraulic system with load sensing valves and pressure compensated valves (Komatsu HydrauMind) |
| Main Pump Type |
Variable displacement piston type |
| Main Pump Flow Capacity |
116 gal/min (439 L/min) |
| Relief Valve Setting (Implement circuits) |
5400 psi (37300 kPa) |
| Relief Valve Setting (Travel circuit) |
5400 psi (37300 kPa) |
| Relief Valve Setting (Swing circuit) |
4190 psi (28900 kPa) |
| Relief Valve Setting (Pilot circuit) |
470 psi (3200 kPa) |
| Travel Hydraulic Motors |
2x axial piston motor with parking brake |
| Swing Hydraulic Motors |
1x axial piston motor with swing holding brake |
Service Refill Capacities
| Fuel Tank Capacity |
105.7 gal (400 L) |
| Engine Oil Capacity |
6.1 gal (23.1 L) |
| Cooling System Fluid Capacity |
5.4 gal (20.4 L) |
| Swing Drive Fluid Capacity |
1.7 gal (6.6 L) |
| Final Drive Oil Capacity (each side) |
0.9 gal (3.3 L) |
| Hydraulic Tank Capacity |
35.7 gal (135 L) |
Operator Environment
| Noise Level in Cab |
72 dB(A) |
| OPG |
ISO OPG top guard level 1 |
| HVAC |
Automatic Air Conditioner (optional) |
| Noise Level outside |
103 dB(A) |
| ROPS |
ISO 12117-2 |
| Display |
Large multi-lingual high resolution LCD monitor |
| HVAC |
Automatic air conditioner, air filter and a higher internal air pressure (+6.0 mm Aq +0.2″Aq) minimizes the amount of external dust that enters the cab |
| Cab Damper |
The new cab damper mounting combined with high rigidity deck aids vibration reduction at operator seat |
