Contents
Dimensions
| Height To Top Of Cab | 8.69 ft in (2648 mm) |
| Length Of Track On Ground | 85 ft in (25908 mm) |
| Ground Clearance | 1.09 ft in (332 mm) |
| Blade Depth Below Ground | 20.99 in (533 mm) |
| Blade Lift Above Ground | 35.12 in (892 mm) |
Undercarriage
| Number Of Bottom Rollers Per Side | 6 |
| Number Of Shoes Per Side | 40 |
| Number Of Upper Rollers | 1 |
| Width Of Shoes | 0.95 in (24 mm) |
Electrical System
| Alternator | 120 amp |
| Battery | 12-volt low-maintenance |
Engine Details
| Emission Standards | Tier 4 |
| Fan | 20 in,(500m)Diameter,Ratio-1:1:1 |
| Pump Operating Angles -Side-To-Side | 35 degrees |
| Pump Operating Angles – Fore And Aft | 45 degrees |
| Transmission Type | Hydrostatic |
| Fuel Tank Capacity | 40.8 gal (154.4 L) |
| Number Of Cylinders | 4 |
| Engine Model | FPT F5HFL463D G003 |
| Gross Power | 73.8 hp (55.1 kw) |
| Cooling System | 23.9 Qt,(22.6 Lt rs) |
| Net Power | 68 hp (50.8 kw) |
| Power Measured @ | 2200 rpm |
| Displacement | 207.5 cu in (3.4 L) |
Drive Train
| Max Drawbar Pull | 39094 lb (173.9 kN) |
| Parking Brakes | Heavy-duty, spring-applied, |
| Final Drive | 2 helical gear |
Capacities
| Engine Oil With Filter | 3.3 gal (12.3 L) |
Operational Specs
| Long Track | 15802.8 lb (7168 kg) |
| Wide Track | 16404.6 lb (7441 kg) |
| Low Ground Pressure | 16839 lb (7638 kg) |
| Winch | 1860.8 lb (844 kg) |
| Center Rock Guard | 156.6 lb (71 kg) |
| Sweeps | 110 lb (50 kg) |
| Draw Bar Pull | 39086 Ibf,173.9(Kn) |
| Operating Weight | 16243.7 lb (7368 kg) |
Performance
| Pump Flow | 20.3 gal/min (76.9 L/min) |
Transmission
| Max Speed – Forward | 5 mph (8.1 km/h) |
| Max Speed – Reverse | 5 mph (8.1 km/h) |
Weights
| Ripper Weight | 1400 lb (635 kg) |
| Cab | 1874 lb (850 kg) |
| Counterweight | 837.8 lb (380 kg) |
Hydraulic
| Lift Cylinder(S) | 2 |
| Lift Cylinder-Bore Diameter | 3.5 in (88.9 mm) |
| Lift Cylinder – Rod Diameter | 1.8 in (44.4 mm) |
| Lift Cylinder – Stroke | 15.6 in (394.5 mm) |
Blade
| Blade Width | 10 ft in (3048 mm) |
| Blade Capacity | 2.2 yd3 (1.7 m3) |
| Blade Height | 33.2 in (841 mm) |
| Blade Type | PAT |
Hydraulic System
| Pump Flow Capacity | 20.9 gal/min (78.8 L/min) |
Standard Blade
| Blade Angle (Both Directions) | 27 degrees |
