CAT 285 Compact Track Loader Specs, Weight & Dimensions

Contents

Loader

Breakout Force (Tilt Cylinder)	13920 lb (6314 kg)
Breakout Force (Lift Cylinder)	8730 lb (3960 kg)
Tipping Load	12745 lb (5781 kg)
Rated Operating Capacity (ROC) (35% Tipping Load)	4461 lb (2023 kg)
Rated Operating Capacity (ROC) (50% Tipping Load)	6372 lb (2891 kg)

1. Length Of Track On Ground	72 in (1830 mm)
2. Overall Length of Track	85.8 in (2180 mm)
3. Length w/o Bucket	132.3 in (3360 mm)
4. Length with Bucket on Ground	157.4 in (3998 mm)
5. Height To Top Of Cab	87.8 in (2230 mm)
6. Max Overall Height	178 in (4520 mm)
7. Bucket Pin Height – Maximum Lift	146.6 in (3724 mm)
8. Bucket Pin Height – Carry Position	8.2 in (209 mm)
9. Reach At Max Lift And Dump	34.7 in (882 mm)
10. Clearance At Max Lift And Dump	119.6 in (3039 mm)
11. Ground Clearance	11 in (280 mm)
12. Departure Angle	26°
13. Maximum Dump Angle	40.5°
14. Overall Width Over Tracks (15.7 in / 400 mm shoe)	79.8 in (2028 mm)
14. Overall Width Over Tracks (17.7 in / 450 mm shoe)	81.8 in (2078 mm)
15. Turn Radius from Center – Machine Rear	74.3 in (1887 mm)
16. Turn Radius from Center – Coupler	62.1 in (1578 mm)
17. Turn Radius from Center – Bucket (racked)	94.5 in (2400 mm)
18. Maximum Reach – With Arms Parallel to Ground	50.6 in (1285 mm)
19. Rack Back Angle at Max Height	89°
20. Bucket Pin Reach at Maximum Lift	16.3 in (413 mm)
21. Bucket Rollback Angle (Ground level)	27.2°

Length Of Track On Ground	72 in (1830 mm)
Ground Contact Area (15.7 in / 400 mm tracks)	2421 in2 (1.56 m2)
Ground Contact Area (17.7 in / 450 mm tracks)	2724 in2 (1.76 m2)
Ground Pressure (15.7 in / 400 mm tracks)	5.6 psi (38.4 kPa)
Ground Pressure (17.7 in / 450 mm tracks)	5.0 psi (34.3 kPa)
Suspension	E-bar (equalizer bar) suspension
Track frame	Integrated tie downs on track frame (4)

Number of Cylinders	4
Engine Make	Caterpillar
Engine Model	Cat C3.6TA
Displacement	220 cu in (3.6 L)
Bore	3.9 in (98 mm)
Stroke	4.7 in (120 mm)
Gross Horsepower	111 hp (82 kw)
Net Horsepower	109 hp (81 kw)
Power Measured @	2200 rpm
Peak Torque	370 lb ft (501 Nm)
Torque Measured @	1500 rpm
Aspiration	Turbocharged and aftercooled
Emission Standards	US EPA Tier 4 Final / EU Stage V

Type	Hydrostatic transmission
Number of Gears	Standard two-speed travel, combined with the optional Speed Sensitive Ride Control system
One Travel Speed (Forward / Reverse)	4.8 mph (7.8 km/h)
Two Travel Speed (Forward / Reverse)	7.7 mph (12.4 km/h)

ROPS	ISO 3471:2008
FOPS	ISO 3449:2005 Level I / Level II
Technology Package T2	Standard Monitor, Standard Joysticks, traditional Key Start switch, and Rear-view camera
Technology Package T4	Touchscreen Monitor, Advanced Joysticks, Push start, X-mount cell phone holder, and a Rear-view camera
Air Conditioning System	R134a (Global Warming Potential = 1430)
Operator Sound Pressure Level (ISO 6396:2008)	82 dB(A)
Exterior Sound Power Level (ISO 6395:2008)	105 dB(A)

Type	Standard + High Flow XPS hydraulics
Standard Pump Flow	23 gal/min (86 L/min)
Standard Relief Valve Pressure	3500 psi (24130 kPa)
Standard Hydraulic Power	46.4 hp (34.6 kw)
High Flow XPS Pump Flow	34 gal/min (129 L/min)
High Flow XPS Relief Valve Pressure	4061 psi (28000 kPa)
High Flow XPS Hydraulic Power	80.7 hp (60.2 kw)

Broad range of performance-matched Cat Attachments make the Cat 285 Compact Track Loader the most versatile machine on the job site.

Fuel Tank Capacity	36 gal (136.1 L)
Engine Oil Capacity	2.4 gal (9.0 L)
Cooling System Capacity	4.6 gal (17.5 L)
Hydraulic System Fluid Capacity	10.8 gal (41.0 L)
Hydraulic Tank Capacity	6.9 gal (26.0 L)