Home » Balers » John Deere Balers » John Deere 582 Silage Special Baler

John Deere 582 Silage Special Baler

Contents
  1. Baler Pickup
  2. Dimensions
  3. Bale Size
  4. Bale Chamber
  5. Wrapping System

Baler Pickup

Overall Width 6.6 ft in (2.01 m)
Tine To Tine Width 5.42 ft in (1.65 m)

Dimensions

Overall Length 12.01 ft in (3660 mm)
Overall Width 8.01 ft in (2440 mm)
Overall Height 8.44 ft in (2570 mm)
Tractor PTO Power Required 70 hp (52.2 kw)
Weight 5114.73 lb (2320 kg)

Bale Size

Bale Width 3.9 ft in (1170 mm)
Bale Diameter – Min 2.1 ft in (610 mm)
Bale Diameter – Max 5.1 ft in (1550 mm)
Bale Weight – Max 1750.5 lb (794 kg)

Bale Chamber

Number Of Belts 6
Belt Width 7.1 in (18 cm)

Wrapping System

Twine Type electric
Ask a question

You may also like
John Deere 44 inches Snowblower for X300 Series Specs
John Deere 0
John Deere 44 inch Snowblower for X300 Series​: Specs & Problems
Key Features Type Front-mount Stage Two-Stage Lift Height 4 in (102 mm) Lift Height
John Deere 1830 Air Drill Specs
John Deere 0
John Deere 1830 Air Hoe Drill
The John Deere 1830 Air Hoe Drill is a versatile and durable seeding implement
Massey Ferguson DTC Codes List
Massey Ferguson 0
Massey Ferguson DTC Codes List: 04.02.E6 – 06.X.1A
Massey Ferguson Diagnostic Trouble Codes (DTC) are alphanumeric codes generated by the onboard diagnostic
John Deere Engine with EPA Tier 4 Final and EU Stage IV Emission Standards
Guides 8
Vehicle Emissions Standards – US EPA Tier, EU Stage (On-Road / Non-Road)
To reduce the environmental and health impacts of diesel engines used in vehicles and
Massey Ferguson DTC Fault Codes List
Massey Ferguson 0
Massey Ferguson DTC Fault Codes List: 00.0.30 – 10.X.26
This page provides a list of Massey Ferguson DTCs numbered 00.0.30 through 10.X.26, which
John Deere Tractor PIN Locations
Serial Numbers 34
John Deere PIN Decoder – Where is the Serial Number Plate & How to Identify?
The Product Identification Number (PIN) / Serial Number plate on John Deere equipment contains