Case 680CK Backhoe Loader

Contents

Backhoe
Dimensions
Loader
Engine Details
Operational Specs
Transmission
Hydraulic

Backhoe

Load Height – Std	11.39 ft in (3470 mm)
Reach From Swivel – Std	19.1 ft in (5820 mm)
Dig Depth – Std	15.98 ft in (4870 mm)

Dimensions

Transport Height	7.98 ft in (2430 mm)
Wheelbase	6.7 ft in (2040 mm)
Ground Clearance	1.09 ft in (330 mm)
Front Wheel Tread Width	70.48 in (1790 mm)
Rear Tread Range	66.54 in (1690 mm)

Loader

Reach At Max Dump Height	5.52 ft in (1680 mm)
Lift Capacity At Full Height	5000 lb (2267.97 kg)
Bucket Breakout Force	1024679.08 lb (4558 kN)
Bucket Width	84.65 in (2150 mm)

Engine Details

Number Of Cylinders	4
Engine Make	J.I. Case
Engine Model	267D
Gross Power	71 hp (53 kw)
Net Power	64 hp (47.8 kw)
Power Measured @	2000 rpm
Torque Measured @	1300 rpm
Net Max Torque	205 lb ft (278 Nm)
Displacement	268.6 cu in (4.4 L)
Bore	4.2 in (105 mm)
Stroke	5 in (127 mm)

Operational Specs

Fuel Tank Capacity	28 gal (106 L)
Max Weight	14499.9 lb (6577 kg)
Hydraulic System Fluid Capacity	17.5 gal (66.3 L)
Front Tire Size (2WD/4WD)	11Lx16
Rear Tire Size (2WD/4WD)	16.9×24
Operating Voltage	12 V
Alternator Supplied Amperage	55 amps

Transmission

Transmission Type	Power shuttle
Number Of Forward Gears	4
Number Of Reverse Gears	4
Max Speed – Forward	18.1 mph (29 km/h)
Max Speed Reverse	23 mph (37 km/h)

Hydraulic

Pump Type	Open center
Pump Flow Capacity	25 gal/min (94.7 L/min)
Relief Valve Pressure	2150 psi (14823.8 kPa)

Ask a question