Contents
Dimensions
| Overall Length | 259.85 in (6600 mm) |
| Height To Top Of Cab | 10.9 ft in (3320 mm) |
| Wheelbase | 129.93 in (3300 mm) |
| Blade Width – Straight | 17 ft in (5.19 m) |
| Drum Width | 55.2 in (1402.08 mm) |
| Length – With Blade On Ground | 33.35 ft in (10.17 m) |
| Turning Radius – Outside End Bits | 26.9 ft in (8.2 m) |
| Wheel Base | 150 ft in (45.72 m) |
| Width – Over End Bits – Blade | 17.02 ft in (5.19 m) |
Operating Specifications
| Ground Clearance | 1.7 ft in (0.52 m) |
| Travel Speed Forward | 7 mph (11.27 km/h) |
| Travel Speed Reverse | 7 mph (11.27 km/h) |
Engine Details
| Number Of Cylinders | 6 |
| Engine Make | Cummins |
| Engine Model | L10 |
| Gross Power | 525 hp (391.5 kw) |
| PTO Power | 192.6 hp (143.6 kw) |
| Power Measured @ | 2100 rpm |
| Displacement | 1098.5 cu in (18.1 L) |
| Bore | 5 in (125 mm) |
| Stroke | 5.4 in (136 mm) |
| Aspiration | Turbocharged |
| Engine Model | Cat 3408E TA |
| Flywheel Power | 473 hp (352.8 kw) |
Operational Specs
| Operating Weight | 24279.6 lb (11013 kg) |
| Fuel Tank Capacity | 246 gal (931.3 L) |
| Hydraulic System Fluid Capacity | 15.3 gal (58 L) |
| Engine Oil Capacity | 4.5 gal (17 L) |
| Cooling System Fluid Capacity | 13.8 gal (52.1 L) |
| Front Tire Size | 18.4-38 |
| 3 Point Hitch Type | III/IVN |
| Rear Tire Size | 18.4-38 |
| 3 Point Hitch Lift Capacity @ 24 Inches | 21700 lb (9843 kg) |
| Alternator Supplied Amperage | 90 amps |
| Operating Voltage | 12 V |
Transmission
| Transmission Type | Full power shift |
| Number Of Forward Gears | 12 |
| Number Of Reverse Gears | 3 |
| Max Speed – Forward | 15.5 mph (24.8 km/h) |
| Max Speed – Reverse | 3.5 mph (5.5 km/h) |
| Forward – 1 | 4 mph (6.3 km/h) |
| Forward – 2 | 7.1 mph (11.3 km/h) |
| Reverse – 1 | 5 mph (8 km/h) |
| Reverse – 2 | 8.7 mph (14.1 km/h) |
Weights
| Operating Weight | 100208.8 lb (45454 kg) |
Hydraulic System
| Hydraulic System Type | Closed center load sensing |
| Pump Flow Capacity | 25.9 gal/min (98.1 L/min) |
Axles
| Front | Fixed |
Hydraulic System
| Relief Valve Pressure | 2300 psi (15858 kPa) |
| Number Of Remote Control Valves | 4 to 5 |
Axles
| Oscillating Rear | Oscillates |
Service Refill Capacities
| Cooling System | 28 gal (106 L) |
| Fuel Tank Capacity | 235 gal (889.6 L) |
| Crankcase | 11.1 gal (42.1 L) |
| Hydraulic Tank | 59.5 gal (225.1 L) |
| Transmission | 27 gal (102.1 L) |
| Differential – Final Drives – Front | 38.9 gal (147 L) |
| Differential – Final Drives – Rear | 38.9 gal (147 L) |
Straight Blade
| Height | 7.3 ft in (2.3 m) |
| Moldboard – Length | 17 ft in (5.2 m) |
| Lift Speed At Rated Rpm | 1.35 ft/s |
| End Bits (2), Self-Sharpening, Length – Each | 18.6 in (472 mm) |
| Cutting Edges (2), Reversible, End Section Length (Each) | 3.5 ft in (1.1 m) |
