Kubota M5660SUHD 4WD Tractor

Dimensions

Overall Length 136 in (3455 mm)
Wheelbase 80.7 in (2050 mm)
Overall Width 73.2 in (1860 mm)
Height to Top of ROPS 95.3 in (2420 mm)
Front Tread Range 51.2 in (1300 mm)
55.1 in (1400 mm)
Rear Tread Range 52.0 in (1320 mm)
67.7 in (1720 mm)
Ground Clearance 16.3 in (415 mm)

Kubota M5660SUHD 4WD Tractor Weight and Dimensions

Tires

Front Tire Size (2WD) 6.5–16
Rear Tire Size (2WD) 14.9–28
Front Tire Size (4WD) 8.3–24
Rear Tire Size (4WD) 14.9–28

Engine Details

Number Of Cylinders 4
Engine Make Kubota
Engine Model Kubota V2403-CR-TE4
Displacement 148.5 cu in (2.434 L)
Bore 3.43 in (87.0 mm)
Stroke 4.03 in (102.4 mm)
Gross Power 57.9 hp (43.2 kw)
Net Power 56 hp (41.8 kw)
PTO Power 50 hp (37.3 kw)
Power Measured @ 2600 rpm
Peak Torque 142.8 lb ft (193.6 Nm)
Torque Measured @ 1600 rpm
Fuel System Common Rail Sytem, direct injection
Air Cleaner Dual dry element
Aftertreatment DOC + DPF
Aspiration Turbocharged
Emission Standards US EPA Tier 4 + EU Stage IIIB (EU StageⅤ)

Kubota M5660SUHD 4WD Tractor Specs

Operational Specs

Operating Weight 4387 lb (1990 kg)
Operator Station Open Operator Station
ROPS Two-post foldable ROPS
Operating Voltage 12 V
Alternator 45 amps
Battery 12 V, CCA 582,  RC: 133 min
Steering Hydraulic Power Steering
Turning Radius 153.5 in (3900 mm)

PTO (Power Take-Off)

PTO Speed 540 rpm / Optional: 540/540E rpm
PTO Type Live-independent, hydraulic PTO
PTO Power 50 hp (37.3 kw)

Transmission

Type 8-speed shuttle transmission. Fully synchronized
Clutch Type Multiple wet disk
Shuttle Type Hydraulic shuttle
Number of Gears 8F / 8R
Max Forward Speed 18.2 mph (29.3 km/h)
Max Reverse Speed 18.6 mph (29.9 km/h)
Differential Bevel gears with differential lock (Rear)
Service Brakes Multiple wet disks mechanical

Hydraulic System

Type Open center hydraulics
Pump Flow Capacity 10.6 gal/min (40.2 L/min)
System Pressure 2770 psi (19100 kPa)
Number of Remote Control Valves 1 standard (2nd & 3rd valve optional)
Controls Position control

Kubota M5660SUHD 4WD Tractor 3-Point Hitch Specs

3 Point Hitch

3 Point Hitch Type Category I & II
3 Point Hitch Lift Capacity @ 24 Inches 3307 lb (1500 kg)
3 Point Hitch Lift Capacity @ ends 4189 lb (1900 kg)
Rear Arms Telescoping lower links
Traction System Swinging drawbar, adjustable in direction

Service Refill Capacities

Fuel Tank Capacity 17.7 gal (67.1 L)
Engine Oil Capacity 1.9 gal (7.2 L)
Cooling System Capacity 2.1 gal (8 L)
Hydraulic / Transmission Oil Capacity 12.7 gal (48 L)
Front Differential Fluid Capacity 1.7 gal (6.5 L)
Front Hub Fluid Capacity (each) 0.8 gal (3 L)
Comments: 2
  1. Richard Cerda

    What is the gear ratio on a Kubota M5660SUHD?

    1. David R. Ledford

      I have never seen any publicly available data on the “gear ratio” for the Kubota M5660SUHD transmission (neither in the owner’s manual nor in the specifications catalogs), probably this question should be asked to the official Kubota dealer

Ask a question