Contents
Dimensions
| Wheelbase | 108.9 ft in (2766.06 mm) |
| Front Tread Range | 1485-2438 mm 58.5-96 in. |
| Limited Slip Differential | Yes |
| Approx. Shipping Weight | 13657 lb (6194.72 kg) |
| Turning Radius With Brakes | 23.5 ft in (7.17 m) |
| Turning Radius Without Brakes | 6.96 ft in (2.13 m) |
| Rear Tread Range | 1604-2302 mm 63.1-90.6 in. |
Engine Details
| Engine Make | John Deere PowerTech PVS |
| Cylinder Liners | Wet sleeve |
| Fuel Tank Capacity | 71.3 gal (269.9 L) |
| Displacement | 415 cu in (6.9 L) |
| Aspiration | Single variable geometry turbocharger with air-to-air aftercooling and cooled exhaust gas recirculation |
| Underhood Muffler | Yes |
PTO (Power Take-Off)
| Standard | Independent 1-3/8 in., 540/1000 reversible shaft |
| Optional | 1-3/8-in. 540/540E/1000 reversible shaft or 1-3/8-in. 540E/1000/1000E reversible shaft |
| PTO Actuation | Electrohydraulic |
Performance
| Advertised Engine | 145 hp (108.2 kw) |
| Advertised Pto | 83 @ 2100 kW 111 @ 2100 hp |
Transmission
| Standard Transmission; Forward/Reverse | 20-speed AutoQuAad Plus ECO transmission; 40 km/h 20-speed AutoQuad Plus ECO transmission; 25 mph |
| Optional Transmission; Forward/Reverse | 16-speed PowrQuad Plus transmission, 20-speed AutoQuad Plus ECO transmission (50), John Deere Infinitely Variable Transmission (IVT)(0.050 to 42), or John Deere IVT (0.050 to 50) km/h 16-speed PowrQuad Plus transmission, 20-speed AutoQuad Plus ECO transmission (31), John Deere Infinitely Variable Transmission (IVT) (0.030 to 26), or John Deere IVT (0.030 to 31) mph |
| Clutch, Wet/Dry | Wet |
| Creeper | Included with IVT |
| Reverser | Left-hand base |
| On-The-Go Shifting (Yes/No/Partial) | Yes |
Tires
| 2wd | Front 11.00-20 in.Rear 480/80R46 |
| Mfwd | Front 380/85R30Rear 480/80R42 |
Hydraulic
| Pump Rated Output 1 | 30.1 gal/min (114 L/min) |
| Maximum Operating Pressure | 2900 psi (20000 kPa) |
| Remote Control Valves Available | 3-450 Series Mechanical SCVs standard, 3 to 4 electrohydraulic SCVs; 2 or 4 mechanical SCVs are optional |
| Hitch Draft Control Load Sense Type | Electrohydraulic |
| Hitch Category (Sae Designation) | 3/3N |
| Sensing Type | Electronic lower link |
| Joystick Scv Control | Mechanical or electronic |
| Hydraulic Type | Pressure & Flow Compensated (PFC) System with Load Sensing Function |
Final Drive
| Final Drive Type | Inboard planetary three pinion |
| Differential Controls | Electrohydraulic |
| Availability | “Front YesFront & Rear Yes”” |
| Engage On-The-Go Rear Differential Lock | Yes |
| Axle Type | Rack and pinion |
| Brakes
The DCU ( “Display Control Unit” or “Digital Control Unit”) is a critical component
The John Deere 1990 CCS™ (Central Commodity System) features metering gates at each individual
John Deere error codes are a vital diagnostic tool, providing insight into the health
Bobcat Engine Error Codes are diagnostic codes generated by the onboard electronic control unit
The John Deere 1830 Air Hoe Drill is a versatile and durable seeding implement
Bobcat Telehandlers, such as the TL25, TL26, TL30, TL34, T35, TL35, T36, TL38, T40,
|
