Contents
Dimensions
| Wheelbase | 68 ft in (1727.2 mm) |
| Approximate Shipping Weight (Open-Station; Cab) | Rollover protective structure (ROPS) – 1315.4 kg, Cab – 1619.3 kg |
| Front Axle Clearance | 12.2 in (309.88 mm) |
| Turning Radius With Brakes | 2.7 m |
| Turning Radius Without Brakes | 9.19 ft in (2.8 m) |
Engine Details
| Number Of Cylinders | 3 |
| Rated Engine Speed | 2600 rpm |
| Engine Model | 3TNV86CT-MJT |
| Engine Make | Yanmar |
| Family | FYDXL1.57TDA, EYDXL1.57TDA, GYDXL1.57TDA |
| Power Take-Off (Pto) Power | Gear four-wheel drive (4WD) – 23.6 kW, Hydrostatic transmission (HST) 4WD – 23.2 kW |
| Engine Type | Diesel |
| Injection Pump Type | High pressure common rail direct injection |
| Emissions Compliance | Final Tier 4 |
| Cylinder Liners | Cast-In-Block |
| Compression Ratio | 19.1:1 |
| Gross Power | 38.3 hp (28.5 kw) |
| Lubrication | Pressurized |
| Cooling System | Water pump |
| Air Cleaner | Dry-type, two-stage dual element |
| Engine Torque At Rated Speed | 105 Nm |
| Displacement | 95.9 cu in (1.6 L) |
| Aspiration | Turbocharged |
| Fuel Tank Capacity | Rollover protective structure (ROPS): 51.1 L 13.5 U.S. gal. Cab: 44.7 L 11.8 U.S. gal. |
| Bore | 3.4 in (86 mm) |
| Stroke | 3.6 in (90 mm) |
Fluid Capacities
| Crankcase With Filter | 4.8 L |
| Transmission And Hydraulic System | 23.8 L |
Electrical
| Battery Size | 500 CCA |
| Alternator (12-V) | 75 amp |
| Starter Size | 1.9 hp |
Fuel System
| Fuel System Type | High pressure common rail direct injection |
| Fuel Consumption | 9.1 L/hr |
PTO (Power Take-Off)
| Standard | Rear – 540 rpm |
| Optional | Mid – 2100 rpm |
| Control | Position control |
| Clutch | Wet disc |
| Brake (For Mid And Rear Pto) | Wet disc |
| Engagement Method | Electro-hydraulic |
Transmission
| Cruise Control | Standard |
| Standard Transmission; Forward/Reverse | Gear 4WD / eHydro (electronic hydrostatic) |
| Left-Hand Reverser | Yes |
| Transmission Gear Ranges | 12F/12R PowrReverser (PRT) Infinitely variable – 3 range |
| Brakes | Multi-plate wet disc |
| Steering | Hydrostatic power steering |
| Clutch, Wet/Dry | Wet |
| Axle Capacity | Front – 720-1450 kg, Rear – 2400 kg |
| Creeper | SpeedMatch optional |
| Final Drive Type | Bull Gear |
Tires
| Front Tread Range | 114 cm |
| Rear Tread Spacing | 103.1 cm |
| Front | Farm – 7-14 Turf (Gear 4WD) – 27×8.50-15 Turf (HST 4WD) – 25×10.5LLx15 R4 – 25×8.5-14 |
| Rear | Farm – ?11.2-24 Turf – 41×14-20 or 41x18LL-16.1 R4 – 15-19.5 |
Hydraulic
| Maximum Operating Pressure | 2500 psi (17236.9 kPa) |
| Draft Control Sensing | Position control |
| Remote Control Valves Available | Up to four rear remotes |
| Pump Rated Output | Steering – 22.3 L/min, Implement – 32.5 L/min |
| Pump Type | Dual gear |
| Hydraulic Type | Open Center |
Final Drive
| Final Drive Type | Bull Gear |
3-Point Hitch
| Category | Category 1 |
| Lift Capacity, 24-In. Behind Link Arms | 997.9 kg |
Operator Station
| Rollover Protective Structure | Type Foldable Yes |
| Platform – Flat/Straddle | Flat |
| Gear Shift Location – Console/Floor | Left Hand Side |
