Contents
Dimensions
| Wheelbase | 67.91 ft in (1724.66 mm) |
| Shipping Weight | 1105 kg |
| Turning Radius Without Brakes | 9.03 ft in (2.75 m) |
Engine Details
| Number Of Cylinders | 3 |
| Rated Engine Speed | 2500 rpm |
| Engine Model | 3TNV88C-NJT |
| Engine Make | Yanmar |
| Family | GYDXL1.64NDA |
| Power Take-Off (Pto) Power | 24.2 hp |
| Engine Type | Direct Injection |
| Injection Pump Type | Direct Injection |
| Emissions Compliance | Final Tier 4 |
| Cylinder Liners | Cast-In-Block |
| Compression Ratio | 19.1:1 |
| Gross Power | 31.3 hp (23.3 kw) |
| Lubrication | Pressurized |
| Cooling System | Water pump |
| Air Cleaner | Dual element |
| Engine Torque At Rated Speed | 86 Nm |
| Displacement | 100.3 cu in (1.7 L) |
| Aspiration | Naturally aspirated |
| Fuel Tank Capacity | 8.5 gal (32 L) |
| Bore | 3.5 in (88 mm) |
| Stroke | 3.6 in (90 mm) |
Fluid Capacities
| Crankcase With Filter | 4.5 L |
Electrical
| Battery Size | 500 CCA |
| Alternator (12-V) | 85 amp |
| Starter Size | 1.9 hp |
Fuel System
| Fuel System Type | Direct Injection |
PTO (Power Take-Off)
| Standard | Rear – 540 rpm, Mid – 2000 rpm |
| Control | Independent |
| Clutch | Independent |
| Brake (For Mid And Rear Pto) | Wet disc |
Transmission
| Cruise Control | Standard |
| Standard Transmission; Forward/Reverse | Hydrostatic transmission (HST) |
| Brakes | Wet disc |
| Steering | Power steering |
| Axle Capacity | Front – 880 kg, Rear – 1089 kg |
| Creeper | No |
| Differential Lock | Yes |
| Final Drive Type | Bull Gear |
Tires
| Front | R1 Ag 7.00-12, R3 Turf 23×8.50-14, R4 Industrial 23×8.50-14, R3 Turf Radial 200/60 R15 |
| Rear | R1 Ag 12.4-16 R3 Turf 14-17.5, R4 Industrial 14-17.5, R3 Turf Radial 300/70 R20 |
Hydraulic
| Maximum Operating Pressure | 2500 psi (17236.9 kPa) |
| Draft Control Sensing | Position control |
| Remote Control Valves Available | Up to three |
| Pump Rated Output | Steering – 15 L/min, Implement – 20.2 L/min |
| Pump Type | Gear |
| Hydraulic Type | Open Center |
Final Drive
| Final Drive Type | Spur Gear |
| Differential Lock | Yes |
3-Point Hitch
| Category | Category 1 |
| Lift Capacity, 24-In. Behind Link Arms | 615 kg |
Operator Station
| Rollover Protective Structure | Foldable, ASABE S478 |
| Platform – Flat/Straddle | Flat |
| Gear Shift Location – Console/Floor | Left Hand Side |
