Home » Tractors » Case IH Tractors » Case IH MXM190 MFWD Tractor

Case IH MXM190 MFWD Tractor

Contents
  1. Dimensions
  2. Engine Details
  3. Operational Specs
  4. Transmission
  5. Hydraulic System

Dimensions

Overall Length 183.86 in (4670 mm)
Wheelbase 9.29 ft in (2830 mm)
Height With ROPS 113.4 in (2880 mm)

Engine Details

Number Of Cylinders 6
Engine Make CaseIH
Gross Power 190 hp (141.7 kw)
PTO Power 160 hp (119.4 kw)
Power Measured @ 2200 rpm
Displacement 457.7 cu in (7.5 L)
Bore 4.5 in (112 mm)
Stroke 5 in (127 mm)

Operational Specs

Operating Weight 17469.5 lb (7924 kg)
Fuel Tank Capacity 105 gal (397.4 L)
Hydraulic System Fluid Capacity 23.8 gal (89.9 L)
3 Point Hitch Lift Capacity @ 24 Inches 17083.7 lb (7749 kg)
Operating Voltage 12 V

Transmission

Transmission Type Full powershift
Number Of Forward Gears 19
Number Of Reverse Gears 6

Hydraulic System

Maximum System Pressure 2750 psi (18960.6 kPa)
Pump Type Closed-center load sensing
Pump Flow Capacity 26 gal/min (98.5 L/min)
Number Of Remote Control Valves 5
Ask a question

You may also like
New Holland and Case IH Tractor Error Codes
CNH Industrial 0
FAQ for New Holland & Case IH Tractor Fault Codes / DTCs
Modern agriculture relies on cutting-edge technology, and Case IH & New Holland tractors are
Massey Ferguson DTC Codes List
Massey Ferguson 0
Massey Ferguson DTC Codes List: 04.02.E6 – 06.X.1A
Massey Ferguson Diagnostic Trouble Codes (DTC) are alphanumeric codes generated by the onboard diagnostic
New Holland and Case IH Tractor Multifunction Controller Errors
CNH Industrial 0
New Holland & Case IH Tractor Multifunction Controller Errors
Modern tractors have transformed into intricate systems powered by multifunction controllers. These controllers are
New Holland Instrument Control Unit Error Codes
CNH Industrial 0
Case IH & New Holland Instrument Control Unit / ICU / EIC Error Codes
In the world of modern farming machinery, the Instrument Control Unit (ICU) is the
Bobcat Toolcat Error Codes for Utility Work Machines
Bobcat 1
Bobcat Toolcat Error Codes (Service Code List for 5600, 5610, UW53, UW56 Utility Work Machines)
The Bobcat Toolcat is a versatile piece of machinery known for its reliability and
Massey Ferguson Dash Control Center / DCC / Instrument Panel
Massey Ferguson 4
Massey Ferguson Error Codes List / MF Fault DTCs
Massey Ferguson Diagnostic Trouble Codes (DTCs) are alphanumeric codes generated by the onboard diagnostic