Home » Telehandlers » Manitou Telehandlers » Manitou MT 6642 XT Telehandler

Manitou MT 6642 XT Telehandler

Contents
  1. Dimensions
  2. Lift
  3. Engine Details
  4. Operational Specs
  5. Transmission
  6. Hydraulic

Dimensions

Length To Fork Face 19.08 ft in (5815.59 mm)
Ground Clearance 16 ft in (406.4 mm)
Width Over Tires 8.25 ft in (2514.6 mm)
Overall Height 7.92 ft in (2414.02 mm)
Turning Radius Outside Tires 13.67 ft in (4166.62 mm)

Lift

Max Lift Height 42 ft in (12801.6 mm)
Max Forward Reach 28.25 ft in (8610.6 mm)
Max Lift Capacity 6600 lb (2993.71 kg)
Max Load At Max Height 6600 lb (2993.71 kg)

Engine Details

Engine Make John Deere
Engine Model e 4045T Turbocharged Diesel
Net Power 115 hp (85.8 kw)
Power Measured @ 2500 rpm
Displacement 276 cu in (4.6 L)
Aspiration Turbocharged

Operational Specs

Operating Weight 22000 lb (9979.1 kg)
Fuel Tank Capacity 47 gal (178 L)
Hydraulic System Fluid Capacity 47 gal (178 L)
Tire Size 13.00 x 24 12-Ply

Transmission

Transmission Type 3-Speed Power Shift Torque Convertor
Number Of Forward Gears 3
Number Of Reverse Gears 3
Max Speed – Forward 18 mph (29 km/h)
Max Speed – Reverse 18 mph (29 km/h)

Hydraulic

Pump Type Single Section Gear Type
Pump Flow Capacity 40 gal/min (151.5 L/min)
Ask a question

You may also like
Kubota Excavator Error Codes FAQ
Kubota 10
Kubota Excavator Error Codes / Fault DTCs
Kubota excavators are equipped with advanced diagnostic systems designed to monitor various components and
John Deere DB120 - World's Largest Planter
John Deere 0
John Deere DB120 Specs – Largest Planter in the World (120 feet / 37 m Wide Toolbar)
The John Deere DB120 Planter is a monumental leap forward in agricultural technology, boasting
Massey Ferguson Dash Control Center / DCC / Instrument Panel
Massey Ferguson 4
Massey Ferguson Error Codes List / MF Fault DTCs
Massey Ferguson Diagnostic Trouble Codes (DTCs) are alphanumeric codes generated by the onboard diagnostic
New Holland DCU Errors
CNH Industrial 0
New Holland & Case IH DCU Errors
The DCU ( “Display Control Unit” or “Digital Control Unit”) is a critical component
John Deere Armrest Interface Control AIC Error Codes
John Deere 0
John Deere AIC Error Codes / Armrest Interface Control Unit Fault DTCs AIC 000158.03 – 524224.09
The John Deere Armrest Interface Control Error Codes, commonly referred to as John Deere
American Wire Gauge (AWG) Size Chart
Guides 2
Wire Gauge Size Charts: AWG (American Wire Gauge), SWG (British Standard), IEC 60228
Wire gauge charts provide a reference for determining the diameter or thickness of wires,