Home » Telehandlers » Genie Telehandlers » Genie GTH-1544 Telehandler

Genie GTH-1544 Telehandler

Contents
  1. Dimensions
  2. Lift
  3. Engine Details
  4. Capacities
  5. Operational Specs

Dimensions

Length To Fork Face 21 ft in (6400 mm)
Ground Clearance 1.25 ft in (380 mm)
Overall Height 8.7 ft in (2651.76 mm)
Wheelbase 11.6 ft in (3535.68 mm)
Overall Width 7.11 ft in (2167.13 mm)
Weight 36601.15 lb (16602 kg)

Lift

Max Lift Height 44 ft in (13410 mm)
Max Forward Reach 27.3 ft in (8321.05 mm)
Lift Capacity At Max – Reach 3498.74 lb (1587 kg)
Reach At Maximum Height 10 in (254 mm)
Max Lift Capacity 15000.26 lb (6804 kg)
Lift Capacity At Max – Height 10000.17 lb (4536 kg)

Engine Details

Power Deutz 4.1TCD turbo charged diesel
Emission Standards Tier 4i
Electrical System System voltage 12 volt
Battery 1000 CCA at 0˚F (-18˚C)
Engine Model GTH™ -1544
Gross Power 154 hp (114.9 kw)

Capacities

Hydraulic Tank – Total System 77 gal (291.5 L)
Fuel Tank Capacity 47 gal (178 L)
Hydraulic Tank 48 gal (181.7 L)

Operational Specs

Retract 16 sec
Extend 14 sec
Fork Cross Section 354.4 in (9000 mm)
Turning Radius – Axle Outside 14.6 ft in (4.5 m)
Drive Speed 18 mph (29 km/h)
Drawbar Pull 22500 lb (10206 kg)
Tire Size 17.5 x 25 in. Air filled 20PR
Ask a question

You may also like
44-inch Snowblower for Deere S100 Series Troubleshooting
John Deere 0
44-inch Snow Blower for John Deere S100 and S200 Series Lawn Tractors
Key Features Type Front-mount Stage Two-Stage Lift Height 4 in (102 mm) Lift Height
New Holland Auxiliary Remote Valve Error Codes
CNH Industrial 0
New Holland & Case IH Auxiliary Remote Valve Error Codes
Hydraulic systems are the muscle behind a tractor’s functionality, and New Holland and Case
Bobcat Skid Steer Loader Engine Error Codes
Bobcat 3
Bobcat Engine Error Codes for Mini Excavators, Skid Steers & Compact Loaders
Bobcat Engine Error Codes are diagnostic codes generated by the onboard electronic control unit
John Deere 1990 CCS Air Drill (Central Commodity System) Specs
John Deere 0
John Deere 1990 CCS Air Drill (Central Commodity System)
The John Deere 1990 CCS™ (Central Commodity System) features metering gates at each individual
VPAT Blade (Dozer Variable Pitch Power Angle Tilt Blades)
Guides 4
Different Types of Dozer Blades Used in Construction, Landscaping, & Mining Industry
A dozer blade, also known as a bulldozer blade, is an attachment mounted to
John Deere Armrest Interface Control AIC Error Codes
John Deere 0
John Deere AIC Error Codes / Armrest Interface Control Unit Fault DTCs AIC 000158.03 – 524224.09
The John Deere Armrest Interface Control Error Codes, commonly referred to as John Deere