Home » Static Three-Wheel Rollers » Dynapac Static Three-Wheel Rollers » Dynapac CS1400 Static Three-Wheel Roller

Dynapac CS1400 Static Three-Wheel Roller

Contents
  1. Dimensions
  2. Engine Details
  3. Operational Specs
  4. Drum
  5. Brakes

Dimensions

Overall Length 188 in (4775.2 mm)
Overall Width 3.5 ft in (1066.8 mm)
Height To Top Of Cab 9.84 ft in (2997.2 mm)
Wheelbase 114 in (2895.6 mm)
Ground Clearance 13 in (330.2 mm)
Turning Radius – Inside 12 ft in (3657.6 mm)
Turning Radius – Outside 19 ft in (5791.2 mm)

Engine Details

Engine Make Deutz
Engine Model TD 3.6 L4 IIIB
Gross Power 73.8 hp (55 kw)
Power Measured @ 2600 rpm
Aspiration Water cooled turbo diesel

Operational Specs

Operating Weight ROPS 24255 lb (11001.9 kg)
Oscillating Angle 9 degrees
Operating Weight 29106 lb (13202.3 kg)
Fuel Tank Capacity 29 gal (109.8 L)
Water Spray Tank Fluid Capacity 140 gal (530 L)
Max Speed 9 mph (14.5 km/h)
Steering Angle 35 degrees

Drum

Drum Width 82.7 in (2100 mm)
Static Linear Load 286 lb/in (51.1 kg/cm)

Brakes

Parking Brake Failsafe multidisc on all 3 drums
Service Brake Hydrostatic in forward and reverse lever
Ask a question

You may also like
John Deere Armrest Interface Control AIC Error Codes
John Deere 0
John Deere AIC Error Codes / Armrest Interface Control Unit Fault DTCs AIC 000158.03 – 524224.09
The John Deere Armrest Interface Control Error Codes, commonly referred to as John Deere
Massey Ferguson Error 0A.41.FF Connection problem on a hydraulic valve
Massey Ferguson 2
Massey Ferguson Diagnostic Trouble Codes List: 06.X.1B – 0B.X.24
Massey Ferguson Diagnostic Trouble Codes are alphanumeric codes generated by the tractor’s onboard diagnostic
Deere Wheel Loader with OPG (Operator Protective Guards)
Guides 4
What is ROPS, FOPS, FOG, OHG & OPG? Cab OPS (Operator Protective Structures)
ROPS, FOPS, FOG, OHG & OPG are Operator Protective Structures (OPS) designed to protect
Massey Ferguson Tractor Fault Codes Troubleshooting
Massey Ferguson 0
Massey Ferguson Fault Codes List: 10.X.27 – 04.02.E5
The Massey Ferguson DTC (Diagnostic Trouble Code) Fault Codes List (from 10.X.27 to 04.02.E5)
New Holland and Case IH Tractor Error Codes
CNH Industrial 0
FAQ for New Holland & Case IH Tractor Fault Codes / DTCs
Modern agriculture relies on cutting-edge technology, and Case IH & New Holland tractors are
New Holland and Case IH Tractor Multifunction Controller Errors
CNH Industrial 0
New Holland & Case IH Tractor Multifunction Controller Errors
Modern tractors have transformed into intricate systems powered by multifunction controllers. These controllers are