Contents
Dimensions
| Overall Width | 11.15 ft in (3395.98 mm) |
| Ground Clearance | 1.75 ft in (533.4 mm) |
| Decking Blade Dig Depth | 17.9 in (454.66 mm) |
| Decking Blade Lift Height | 54.4 in (1381.76 mm) |
| Decking Blade Width | 123.5 in (3136.9 mm) |
| Height | 10.45 ft in (3185.16 mm) |
| Height – Top Of Cab | 10.45 ft in (0.27 m) |
| Length | 26.34 ft in (8027.93 mm) |
| Length – Overall, Cable | 295.8 in (7513.32 mm) |
| Length – Overall, Grapple, Dual | 316 in (8026.4 mm) |
| Rear Axle – Pin | 86.7 in (2202.18 mm) |
| Top Roller Height – Cable | 109 in (2768.6 mm) |
| Tread Width | 103.2 in (2621.29 mm) |
| Turning Radius – Over Tires | 21 ft in (0.54 m) |
| Axle Height | 33.21 in (843.28 mm) |
| Wheel Base | 12.93 ft in (0.33 m) |
| Boom Height – Maximum – Standard | 169.4 in (4302.76 mm) |
Engine Details
| Number Of Cylinders | 6 |
| Displacement | 439 cu in (7.2 L) |
| Bore | 5 in (127 mm) |
| Stroke | 5 in (127 mm) |
| Net Power – Iso 9249 | 219 hp (163.4 kw) |
| Net Power – Sae J1349 | 219 hp (163.4 kw) |
| Gross Power – Sae J1995 | 232 hp (173.1 kw) |
| Engine Model | Cat C7 ACERT |
| Net Flywheel Power | 219 hp (163.4 kw) |
| Derating Altitude | 7900 ft in (2408 m) |
| Governed Speed At Rated Power | 1800 rpm |
| Air Cleaner | Dry precleaner |
| Electrical System | 24V Direct Electric |
| Battery Quantity | 2 |
| Battery – Volts | 12V |
| Battery Capacity | 950 CCA |
| Starting System | Direct electric |
| Maximum Torque At Rated Speed | 951 N-m at 1400 RPM |
| Engine Make | DITAC EUI: 4 stroke cycle diesel |
Power Train
| Brakes – Service Type | Enclosed wet disc each wheel, full hydraulic |
| Brakes – Parking Type | Spring applied, hydraulic released, Electro-hydraulic controlled |
| Steering, Frame Articulation | +/- 45 degrees |
| Travel Speed – Forward 1 | 4 mph (6.5 km/h) |
| Travel Speed – Forward 2 | 5.6 mph (9.1 km/h) |
| Travel Speed – Forward 3 | 6.8 mph (11 km/h) |
| Travel Speed – Forward 4 | 9.5 mph (15.3 km/h) |
| Travel Speed – Reverse 1 | 3.9 mph (6.3 km/h) |
| Travel Speed – Reverse 2 | 6.5 mph (10.5 km/h) |
| Travel Speed – Reverse 3 | 11.6 mph (18.7 km/h) |
| Transmission Cooler Type | Plate |
| Transmission | 5 fwd / 3 rev countershaft, powershift |
| Travel Speed – Forward 5 | 17.1 mph (27.6 km/h) |
| Torque Converter Type | Lock-up clutch |
Weights
| Est. Operating Weight | 42325 lb (19198.3 kg) |
Hydraulic System
| Pump Type | Axial piston |
| Relief Valve Setting | 3045 psi |
| Circuit Type | Closed center, variable flow |
| Steering Valve | Direct link, non-follow |
| Steering Cylinder – Bore | 3.5 in (88.9 mm) |
| Steering Cylinder – Stroke | 17.3 in (437.4 mm) |
| Steering Cylinder – Rod Diameter | 2 in (50.8 mm) |
| Dozer Valve | Electro-hydraulic |
| Dozer Cylinder – Bore | 4 in (101.6 mm) |
| Dozer Cylinder – Stroke | 4 in (101.6 mm) |
| Dozer Cylinder – Rod Diameter | 2.3 in (57.2 mm) |
| Grapple Valve | 4 or 5 stack, pilot |
| Pump Output | 50 gal/min |
| Reservoir Tank Capacity | 14.3 gal (54.1 L) |
Service Refill
| Fuel Tank Capacity | 99.8 gal (377.8 L) |
| Differential – Final Drives – Front | 13.7 gal (51.9 L) |
| Differential – Final Drives – Rear | 19.5 gal (73.9 L) |
| Transmission – Torque Converter | 14.2 gal (53.8 L) |
| Mechanical Winch | 6.5 gal (24.7 L) |
| Cooling System | 15 gal (56.8 L) |
| Hydraulic System – Total | 29.6 gal (112.1 L) |
| Engine Oil | 7.1 gal (26.9 L) |
| Hydraulic System – Tank | 14.3 gal (54.2 L) |
Msc Comments
| Spec Date | 5/06 |
Arch
| Dual Function – Lift Maximum Reach | 56.9 in (1443 mm) |
| Dual Function – Lift Highest, Farthest | 85.2 in (2163.1 mm) |
| Dual Function – Lift Highest, Retracted | 111 in (2817.2 mm) |
| Dual Function – Lift Lowest, Farthest | 13.2 in (335.1 mm) |
| Dual Function – Lift Lowest, Retracted | 40 in (1014 mm) |
| Dual Function – Reach Highest, Farthest | 117.3 in (2977.9 mm) |
| Dual Function – Reach Highest, Retracted | 65.1 in (1653.1 mm) |
| Dual Function – Reach Lowest, Farthest | 108.8 in (2762 mm) |
| Dual Function – Reach Lowest, Retracted | 69.9 in (1775 mm) |
| Dual Function – Reach Maximum | 122.9 in (3120.9 mm) |
| Dual Function – Loaded Tire Radius | 33.2 in (843.1 mm) |
Grapple
| Bunching – Full Open Height | 75 in (1905 mm) |
| Bunching – Fully Closed Height | 54 in (1371.6 mm) |
| Bunching – Minimum Stem Diameter | 7.2 in (182.9 mm) |
| Bunching – Tip To Tip Height | 83 in (2108.2 mm) |
| Bunching – Tong Opening | 127 in (3225.8 mm) |
| Bunching – Capacity | 16.6 ft2 (1.6 m2) |
| Sorting Capacity | 14.4 ft2 (1.4 m2) |
| Thinning – Capacity | 19 ft2 (1.8 m2) |
| Thinning – Tip To Tip Height | 85 in (2159 mm) |
| Thinning – Tong Opening | 135 in (3429 mm) |
| Thinning – Full Open Height | 74 in (1879.6 mm) |
| Thinning – Minimum Stem Diameter | 9.5 in (241.3 mm) |
| Thinning – Fully Closed Height | 58 in (1473.2 mm) |
Winch – Grapple Skidder
| Maximum Line Pull – Bare Drum | 39342 lb (17845.3 kg) |
| Maximum Line Speed | 132 ft/min |
| Drum Capacity – 19.0 Mm (3/4 In) | 154 ft in (47 m) |
| Drum Diameter | 9 in (228.6 mm) |
| Drum Width | 11 in (279.4 mm) |
| Drum Capacity – 22.2 Mm (7/8 In) | 97 ft in (29.6 m) |
| Drum Capacity – 25.4mm (1 In) | 91 ft in (27.8 m) |
Arch, Dual Function
| Cr – Lift Highest, Retracted | 111 in (2817.2 mm) |
| Cr – Lift Highest, Farthest | 85.2 in (2163.1 mm) |
| Cr – Lift Maximum Reach | 56.9 in (1443 mm) |
| Cr – Lift Lowest, Retracted | 40 in (1014 mm) |
| Cr – Lift Lowest, Farthest | 13.2 in (335.1 mm) |
| Cr – Loaded Tire Radius | 33.2 in (843.1 mm) |
| Cr – Reach Highest, Retracted | 65.1 in (1653.1 mm) |
| Cr – Reach Lowest, Retracted | 69.9 in (1775 mm) |
| Cr – Reach Lowest, Farthest | 108.8 in (2762 mm) |
| Cr – Reach Highest, Farthest | 117.3 in (2977.9 mm) |
| Cr – Reach Maximum | 122.9 in (3120.9 mm) |
Grapple, Cr – Bunching
| Grapple Capacity | 16.6 ft2 (1.6 m2) |
| Tip To Tip Height | 83 in (2108.2 mm) |
| Tong Ppening | 127 in (3225.8 mm) |
| Full Open Height | 75 in (1905 mm) |
| Minimum Stem Diameter | 7.2 in (182.9 mm) |
| Full Closed Height | 54 in (1371.6 mm) |
Grapple, Cr – Thinning
| Grapple Capacity | 19 ft2 (1.8 m2) |
| Tip To Tip Height | 85 in (2159 mm) |
| Tong Ppening | 135 in (3429 mm) |
| Full Closed Height | 58 in (1473.2 mm) |
| Full Open Height | 74 in (1879.6 mm) |
| Minimum Stem Diameter | 9.5 in (241.3 mm) |
Winch – Cable Skidder
| Maximum Line Pull – Bare Drum | 45850 lb (20797.3 kg) |
| Maximum Line Speed | 360 ft/min |
| Drum Capacity – 19.0 Mm (3/4 In) | 148 ft2 (13.8 m2) |
| Drum Capacity – 22.2 Mm (7/8 In) | 105 ft2 (9.8 m2) |
| Drum Capacity – 25.4mm (1 In) | 82 ft in (25 m) |
| Drum Diameter | 10 in (254 mm) |
| Drum Width | 11 in (279.4 mm) |
