Contents
Dimensions
| Ground Clearance – Tractor | 26.1 in (662.94 mm) |
| Rear Axle – Rear Of Machine | 90.2 in (2291.08 mm) |
| Height – Overall Shipping | 163.2 in (4145.28 mm) |
| Height – Scraper Blade Maximum | 20 in (508 mm) |
| Height – Top Of Cab | 12.25 ft in (0.32 m) |
| Length – Maximum (Push-Pull) | 655.1 in (16639.54 mm) |
| Length – Overall Machine – Standard | 597 in (15163.8 mm) |
| Wheel Base | 28.9 ft in (0.74 m) |
| Extended Push Block (Push-Pull) | 108 in (2743.2 mm) |
| Width – Inside Of Bowl | 134 in (3403.6 mm) |
| Width – Outside Rear Tires | 143.2 in (3637.28 mm) |
| Width – Overall Machine | 155 in (3937 mm) |
| Front Of Tractor To Front Axle | 142.2 in (3611.88 mm) |
| Width – Tractor | 137.81 in (3500.12 mm) |
| Width – Rear Tire Centers | 96.9 in (2461.27 mm) |
| Axle To Vertical Hitch Pin | 20 in (508 mm) |
General
| Overall Width | 12.93 ft in (3.95 m) |
| Overall Shipping Height | 13.62 ft in (4.16 m) |
| Fuel Tank Refill Capacity – Scraper | 370 gal (1400.61 L) |
| Maximum Depth Of Cut | 17.7 in (449.58 mm) |
| Maximum Depth Of Spread | 21.1 in (535.95 mm) |
| 180 Degrees Curb-To-Curb Turning Width | 40.12 ft in (12.23 m) |
| Rated Load | 37 200 kg (82,200 lb); 37.2 tonnes (41.1 tons) |
| Scraper Capacity – Heaped | 34 yd3 (26 m3) |
| Scraper Capacity – Struck | 24 yd3 (18.35 m3) |
| Tires – Scraper | 37.25R35**E3 |
| Tires – Tractor | 37.25R35**E3 |
| Top Speed – Loaded | 34.71 mph (55.85 km/h) |
| Width – Cut | 11.5 ft in (3.51 m) |
Non Push-Pull
| Overall Length | 49.34 ft in (15.04 m) |
| Operating Weight – Empty | 114950 lb (52140.45 kg) |
Engine Details
| Emissions | Cat C9.3 ACERT and C18 ACERT engines meet US EPA Tier 4 Final/EU Stage IV emission standards. |
| Flywheel Power – Tractor | 570 hp (425.1 kw) |
| Engine Model – Tractor | Cat C18 ACERT |
| Rated Engine Rpm – Tractor | 1900 rpm |
Tractor Engine
| Flywheel Power – Tractor/Scraper | 570 HP |
Engine Details
| Engine Model – Scraper | Cat C9.3 ACERT |
| Rated Engine Rpm – Scraper | 2150 rpm |
| Flywheel Power – Scraper | 290 hp (216.3 kw) |
Transmission
| Top Speed – Loaded | 34.7 mph (55.9 km/h) |
Service Refill Capacities
| Fuel Tank Capacity | 370 gal (1400.7 L) |
| Hydraulic System | 37.5 gal (142 L) |
| Crankcase – Tractor | 13.7 gal (51.9 L) |
| Crankcase – Scraper | 6.5 gal (24.7 L) |
| Transmission System – Tractor | 29 gal (109.8 L) |
| Transmission System – Scraper | 12.9 gal (48.9 L) |
| Cooling System – Tractor | 19.8 gal (75 L) |
| Cooling System – Scraper | 16.1 gal (61 L) |
| Diesel Exhaust Fluid – Tractor | 8 gal (30.3 L) |
| Diesel Exhaust Fluid – Scraper | 5.8 gal (22 L) |
Cab
| ROPS/FOPS | ROPS/FOPS meet ISO Standards. |
| Exterior Sound Level | The exterior sound power level for the standard machine (ISO 6393) is 116 dB(A). |
Scraper Bowl
| Scraper Capacity – Heaped | 34 yd3 (26 m3) |
Implement Cycle Times
| Bowl Raise | 3.5 s |
| Bowl Lower | 3.5 s |
| Ejector Extend | 8.5 s |
| Ejector Retract | 8.5 s |
| Apron Raise | 4 s |
| Apron Lower | 3.8 s |
| Bail Raise | 1.5 s |
| Bail Lower | 2.1 s |
Safety Criteria Compliance Standards
| Rollover Protection Structure (ROPS) | ISO 3471:2008 for up to 21 282 kg (46,919 lb) |
| Falling Object Protective Structure (FOPS) | ISO 3449:2005 Level II |
| Brakes | ISO 3450:2011 |
| Steering System | ISO 5010:2007 |
| Seat Belt | SAE J386:FEB2006 |
| Reverse Alarm | ISO 9533:2010 |
Travel Speeds – Runout
| Transmission Gear – First | 3.4 mph (5.5 km/h) |
| Transmission Gear – Second | 6.2 mph (10 km/h) |
| Transmission Gear – Third | 7.7 mph (12.4 km/h) |
| Transmission Gear – Fourth | 10.5 mph (16.9 km/h) |
| Transmission Gear – Fifth | 14.1 mph (22.7 km/h) |
| Transmission Gear – Sixth | 19 mph (30.6 km/h) |
| Transmission Gear – Seventh | 25.7 mph (41.4 km/h) |
| Transmission Gear – Eighth | 34.7 mph (55.9 km/h) |
| Transmission Gear – Reverse | 6.2 mph (10 km/h) |
Push-Pull
| Operating Weight – Empty | 119060 lb (54004.8 kg) |
| Overall Length – With Bail Down | 54.6 ft in (16.7 m) |
