Contents
Ripper
| Pry-Out Force | 5660 lb (2567.4 kg) |
| Ripping Depth – Maximum | 8.9 in (226.1 mm) |
| Ripper Shank Holders | 5 |
| Penetration Force | 17692 lb (8025 kg) |
| Machine Length Increase, Beam Raised | 41.5 in (1054.1 mm) |
| Ripper Shank Holder Spacing | 21 in (533.4 mm) |
Engine Details
| Number Of Cylinders | 6 |
Frame
| Front Frame Structure – Height | 1 ft in (279.4 mm) |
| Front Frame Structure – Width | 0.7 ft in (203.2 mm) |
Engine Details
| Torque Rise | 45 % |
| Displacement | 428 cu in (7.1 L) |
| Bore | 4.2 in (105 mm) |
| Stroke | 5.4 in (134.9 mm) |
| Emissions | Tier 4 Interim/Stage IIIB equivalent |
| Engine Model | Cat C7.1 ACERT |
| Derating Altitude | 10000 ft in (3048 m) |
| Maximum Torque | 693 lb ft (939.6 Nm) |
| Base Power (1st Gear) – Net | 145 hp (108.2 kw) |
| Standard Capability | 109 degrees |
| Speed At Rated Power | 2,100 rpm |
| High – Ambient Capability | 122 degrees |
| Base Power (1st Gear) – Net – Metric | 147 hp (109.7 kw) |
| High Ambient – Fan Speed – Maximum | 1,350 rpm |
| High Ambient – Fan Speed – Standard | 1,000 rpm |
| High Ambient – Fan Speed – Minimum | 500 rpm |
| Vhp Plus Range – Net | 108-141 kW (145-189 hp) |
| Vhp Plus Range – Net – Metric | 108-141 kW (147-192 hp) |
Frame
| Circle – Diameter | 60.2 in (1529.1 mm) |
| Drawbar – Height | 6 in (152.4 mm) |
| Front Axle – Height To Center | 22.5 in (571.5 mm) |
| Circle – Blade Beam Thickness | 1.4 in (35.6 mm) |
| Front Axle – Total Oscillation Per Side | 32 degrees |
| Drawbar – Thickness | 0.4 in (10.2 mm) |
| Drawbar – Width | 3 in (76.2 mm) |
| Front-Top/Bottom Plate – Width | 10 in (254 mm) |
| Front-Top/Bottom Plate – Thickness | 0.9 in (22.1 mm) |
| Front Axle – Wheel Lean – Left/Right | 18 degrees |
Engine Details
| Vhp Plus – Gear 1f, Net | 145 hp (108.2 kw) |
| Vhp Plus – Gear 2f, Net | 153 hp (114.1 kw) |
| Vhp Plus – Gear 3f, Net | 161 hp (120.1 kw) |
| Vhp Plus – Gear 4f, Net | 169 hp (126.1 kw) |
| Vhp Plus – Gear 5f, Net | 174 hp (129.8 kw) |
| Vhp Plus – Gear 6f, Net | 179 hp (133.5 kw) |
| Vhp Plus – Gear 7f, Net | 184 hp (137.3 kw) |
| Vhp Plus – Gear 8f, Net | 189 hp (141 kw) |
| Base Power (All Gears) – Net | 145 hp (108.2 kw) |
Power Train
| Brakes – Parking | Multiple Oil Disc |
| Brakes – Service | Multiple Oil Disc |
| Transmission | Direct Drive, Powershift |
| Forward/Reverse Gears | 8 Forward/6 Reverse |
| Brakes – Secondary | Dual Circuit |
| Brakes – Service – Surface Area | 3565 in2 (2.3 m2) |
Tires
| Note | Dimension changes may vary by brand/type and inflation of tires. |
Weights
| Operating Weight – Typically Equipped | 39892 lb (18094.8 kg) |
| Gross Vehicle Weight – Base – Total | 35025 lb (15887.1 kg) |
| Gross Vehicle Weight – Maximum – Total | 48987 lb (22220.2 kg) |
| Operating Weight – Typically Equipped – Total | 39892 lb (18094.8 kg) |
| Gross Vehicle Weight – Base – Rear Axle | 26374 lb (11963.1 kg) |
| Operating Weight – Typically Equipped – Front Axle | 10563 lb (4791.3 kg) |
| Operating Weight – Typically Equipped – Rear Axle | 29329 lb (13303.5 kg) |
| Gross Vehicle Weight – Base – Front Axle | 8651 lb (3924.1 kg) |
| Gross Vehicle Weight – Maximum – Front Axle | 15675 lb (7110.1 kg) |
| Gross Vehicle Weight – Maximum – Rear Axle | 33312 lb (15110.1 kg) |
Tires
| 17.5 R25 Tire (14×25 Rim) Dimension Adjustments – Height To Dimensions 1, 2, 8, 9, 10 | -0.8 in (-20.3 mm) |
| 17.5 R25 Tire (14×25 Rim) Dimension Adjustments – Length Front Tire To Rear Of Machine Dimension 6 | -0.6 in (-15.2 mm) |
| 17.5 R25 Tire (14×25 Rim) Dimension Adjustments – Width To Tire Centerline Dimension 11 | 4.1 in (104.2 mm) |
| 17.5 R25 Tire (14×25 Rim) Dimension Adjustments – Width To Tire Front/Rear Tires Dimensions 12, 13 | 7.6 in (193.1 mm) |
Hydraulic System
| Standby Pressure | 609 psi |
| Maximum System Pressure | 3500 psi |
| Pump Type | Variable Piston |
| Circuit Type | Parallel |
| Pump Output | 55.7 gal/min |
| Reservoir Tank Capacity | 15.9 gal (60 L) |
Moldboard
| Blade Width | 12 ft in (3.7 m) |
| Arc Radius | 16.3 in (414.1 mm) |
| Throat Clearance | 4.9 in (124.5 mm) |
| Cutting Edge Width | 6 in (152.4 mm) |
| Cutting Edge Thickness | 0.6 in (15.3 mm) |
| End Bit – Width | 6 in (152.4 mm) |
| End Bit – Thickness | 0.6 in (15.3 mm) |
| Moldboard – Height | 24 in (609.6 mm) |
| Moldboard – Thickness | 0.9 in (22.1 mm) |
| Blade Pull – Maximum Gvw | 29980 lb (13598.8 kg) |
| Blade Pull – Base Gvw | 23737 lb (10767 kg) |
| Blade Down Pressure – Base Gvw | 15030 lb (6817.5 kg) |
| Blade Down Pressure – Maximum Gvw | 27235 lb (12353.6 kg) |
Operating Specifications
| Top Speed – Forward | 28.4 mph (45.8 km/h) |
| Top Speed – Reverse | 22.4 mph (36.1 km/h) |
| Turning Radius – Outside Front Tires | 24.3 ft in (7.5 m) |
| Steering Range – Left/Right | 47.5 degrees |
| Articulation Angle – Left/Right | 20 degrees |
| Forward – 8th | 28.4 mph (45.8 km/h) |
| Forward – 7th | 19.5 mph (31.4 km/h) |
| Forward – 6th | 14.2 mph (22.9 km/h) |
| Forward – 5th | 10.4 mph (16.8 km/h) |
| Forward – 4th | 6.7 mph (10.8 km/h) |
| Forward – 3rd | 4.9 mph (7.9 km/h) |
| Forward – 2nd | 3.4 mph (5.5 km/h) |
| Forward – 1st | 2.5 mph (4.1 km/h) |
| Reverse – 6th | 22.4 mph (36.1 km/h) |
| Reverse – 5th | 15.4 mph (24.8 km/h) |
| Reverse – 4th | 8.2 mph (13.2 km/h) |
| Reverse – 3rd | 5.3 mph (8.6 km/h) |
| Reverse – 2nd | 3.9 mph (6.3 km/h) |
| Reverse – 1st | 1.9 mph (3.1 km/h) |
Standards
| Brakes | ISO 3450 |
| ROPS/FOPS | ISO 3471/ISO 3449 |
| Sound | ISO 6394; ISO 6395 |
| Steering | ISO 5010 |
Air Conditioning System
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg of refrigerant which has a CO2 equivalent of 2.88 metric tonnes. |
Service Refill
| Cooling System | 12.9 gal (48.9 L) |
| Engine Oil | 7.9 gal (30 L) |
| Hydraulic System – Tank | 16.9 gal (64 L) |
| Tandem Housing – Each | 15.6 gal (59.1 L) |
| Circle Drive Housing | 1.8 gal (6.9 L) |
| Front Wheel Spindle Bearing Housing | 0.2 gal (0.5 L) |
| Fuel Tank Capacity | 100 gal (378.6 L) |
| Transmission – Differential – Final Drives | 16.5 gal (62.5 L) |
Blade Range
| Circle Centershift – Right | 25.8 in (655.4 mm) |
| Circle Centershift – Left | 25.8 in (655.4 mm) |
| Moldboard Sideshift – Right | 26 in (660.4 mm) |
| Moldboard Sideshift – Left | 20.1 in (510.6 mm) |
| Blade Tip Range – Forward | 40 degrees |
| Blade Tip Range – Backward | 5 degrees |
| Maximum Shoulder Reach Outside Of Tires – Right | 75 in (1905 mm) |
| Maximum Shoulder Reach Outside Of Tires – Left | 68.6 in (1742.5 mm) |
| Maximum Lift Above Ground | 16.8 in (426.8 mm) |
| Maximum Depth Of Cut | 28.3 in (718.9 mm) |
| Maximum Blade Position Angle | 90 degrees |
Scarifier
| Front, V-Type – Working Width | 47.4 in (1204 mm) |
| Mid, V-Type – Scarifier Shank Holders | 11 |
| Front, V-Type, 5 Or 11 Tooth – Working Width | 40.6 in (1031.3 mm) |
| Front, V-Type, 5 Or 11 Tooth – Scarifying Depth, Maximum | 18.4 in (467.4 mm) |
| Front, V-Type, 5 Or 11 Tooth – Scarifier Shank Holders | 5/11 |
| Front, V-Type, 5 Or 11 Tooth – Scarifier Shank Holder Spacing | 4.6 in (116.9 mm) |
| Mid, V-Type – Working Width | 46.6 in (1183.7 mm) |
| Mid, V-Type – Scarifying Depth, Maximum | 11.5 in (292.1 mm) |
| Mid, V-Type – Scarifier Shank Holder Spacing | 4.6 in (116.9 mm) |
| Mid, Straight – Working Width | 71 in (1803.4 mm) |
| Mid, Straight – Scarifier Shank Holder Spacing | 4.4 in (111.8 mm) |
| Mid, Straight – Scarifier Shank Holders | 17 |
| Mid, Straight – Scarifying Depth, Maximum | 16.8 in (426.8 mm) |
| Mid, Straight – Ripping Depth, Maximum | 12.5 in (317.5 mm) |
Tandems
| Height | 19.8 in (503 mm) |
| Width | 6.8 in (172.8 mm) |
| Sidewall Thickness – Inner | 0.5 in (12.7 mm) |
| Sidewall Thickness – Outer | 0.6 in (15.3 mm) |
| Drive Chain Pitch | 1.8 in (45.8 mm) |
| Wheel Axle Spacing | 59.5 in (1511.3 mm) |
| Tandem Oscillation – Front Up | 15 degrees |
| Tandem Oscillation – Front Down | 25 degrees |
Emissions
| Note | US EPA Tier 4 Interim/EU Stage IIIB equivalent |
