Contents
Dimensions
| Overall Length | 28 ft in (8534 mm) |
| Width Over Tires | 8.05 ft in (2452 mm) |
| Wheelbase | 20.41 ft in (6219 mm) |
| Rear Ground Clearance | 1.25 ft in (380 mm) |
| Tandem Axle Wheelbase | 5.23 ft in (1594 mm) |
| Front Ground Clearance | 2.05 ft in (622 mm) |
| Blade Base | 8.41 ft in (2562 mm) |
| Overall Height With Cab | 10.34 ft in (3150 mm) |
| Height To Top Of Isomount Cab | 10.96 ft in (3340 mm) |
| Bank Angle | 90 |
Engine Details
| Emission Standards | Tier 3 |
| Number Of Cylinders | 6 |
| Engine Model | FPT F4HE9687C |
| Gross Power | 220 hp (164.1 kw) |
| Power Measured @ | 2200 rpm |
| Peak Torque | 169.7 lb ft (230 Nm) |
| Torque Measured @ | 1500 rpm |
| Net Power Gears 7-8 | 205 hp (152.9 kw) |
| Net Torque Gears 7-8 | 686 lb ft (930.1 Nm) |
| Displacement | 409 cu in (6.8 L) |
| Aspiration | Turbocharged with air to air cooler |
Operational Specs
| Std Operation Weight – Front Axle | 12129 lb (5501.7 kg) |
| Std Operation Weight – Rear Axle | 23864 lb (10824.6 kg) |
| Hydraulic System Fluid Capacity | 50.2 gal (190.1 L) |
| Std Operation Weight – Total | 35993 lb (16326.2 kg) |
| Oil System Fluid Capacity | 18.5 gal (70.1 L) |
| Fuel Tank Capacity | 90 gal (340.7 L) |
| Cooling System Fluid Capacity | 10.5 gal (39.8 L) |
| Transmission Fluid Capacity | 25 gal (94.7 L) |
| Rear Diff/Final Drive Fluid Capacity | 11.6 gal (44 L) |
| Circle Gearbox Fluid Capacity | 0.8 gal (2.8 L) |
| Tandem Case Fluid Capacity (Each) | 15.9 gal (60.2 L) |
| Tire Size | 17.5-25 |
| Operating Voltage | 24 V |
| Alternator Supplied Amperage | 90 amps |
Steering
| Articulation Angle | 25 degrees |
| Turning Radius | 23.8 ft in (7.3 m) |
Transmission
| Transmission Type | Powershift |
| Number Of Gears – Forward | 8 |
| Number Of Gears – Reverse | 4 |
| Max Speed – Forward | 26.6 mph (42.9 km/h) |
| Max Speed – Reverse | 17.7 mph (28.5 km/h) |
| Speed Range | 8 |
Front Axle
| Wheel Lean | 20 degrees |
| Oscillation – Total | 15.3 degrees |
Moldboard
| Moldboard Width | 14 ft in (4267.2 mm) |
| Moldboard Height | 23.7 in (600 mm) |
| Moldboard Thickness | 0.9 in (22 mm) |
| Max Depth Of Cut | 28 in (711.2 mm) |
| Side Shift Left | 21 in (533.4 mm) |
| Side Shift Right | 27 in (685.8 mm) |
| Blade Down Pressure | 20626 lb (9355.8 kg) |
Hydraulic System
| Pump Type | load sensing piston |
| Pump Flow | 49 gal/min (185.5 L/min) |
Circle
| Blade Lift Above Ground | 17.6 in (445 mm) |
| Diameter | 69 in (1752.6 mm) |
| Rotation | 360 degrees |
| Max Lift Above Ground | 17.5 in (444.5 mm) |
