Contents
- Engine Details
- Transmission
- Steering
- Tires
- Brakes
- Body Hoists
- Final Drives
- Operating Specifications
- Service Refill Capacities
- Weight Distributions – Approximate
- Weights – Approximate
- Capacity – Dual Slope – 100% Fill Factor
- ROPS
- Sound
- Suspension
- Capacity – Coal Bodies – 100% Fill Factor
- Capacity – X Body – 100% Fill Factor
Engine Details
| Cylinders | 12 |
| Net Torque | 3899 lb ft (5286.4 Nm) |
| Displacement | 1959 cu in (32.2 L) |
| Bore | 5.7 in (144.8 mm) |
| Stroke | 6.4 in (162.6 mm) |
| Net Power – Iso 9249 | 945 hp (704.7 kw) |
| Net Power – Sae J1349 | 945 hp (704.7 kw) |
| Net Power – 80/1269/Eec | 945 hp (704.7 kw) |
| Gross Power – Sae J1995 | 1025 hp (764.4 kw) |
| Engine Model | Cat C32 ACERT |
| Engine Power – Iso 14396 | 1012 hp (754.7 kw) |
| Peak Torque – Speed | 1200 rpm |
| Engine Speed | 1800 rpm |
Transmission
| Reverse | 7.7 mile/h |
| Forward – 1 | 6.8 mph (11 km/h) |
| Forward – 2 | 9.2 mph (14.9 km/h) |
| Forward – 3 | 12.5 mph (20.2 km/h) |
| Forward – 4 | 16.9 mph (27.2 km/h) |
| Forward – 5 | 22.9 mph (36.9 km/h) |
| Forward – 6 | 30.7 mph (49.5 km/h) |
| Forward – 7 | 41.7 mph (67.2 km/h) |
Steering
| Steering Standards | SAE J1511 FEB94 ISO 5010:1992 |
| Steer Angle | 30.5 degrees |
| Turning Diameter – Front | 83 ft in (25.3 m) |
| Turning Circle – Clearance Diameter | 93 ft in (28.4 m) |
Tires
| Standard Tire | 27.00R49 (E4) |
Brakes
| Brake Standards | ISO 3450:1996 |
| Brake Surface Area – Rear | 15828 in2 (10.3 m2) |
| Brake Surface Area – Front | 6331 in2 (4.1 m2) |
Body Hoists
| Pump Flow – High Idle | 120.9 gal/min |
| Relief Valve Setting – Raise | 2750 psi |
| Body Raise Time – High Idle | 15 s |
| Body Lower Time – Float | 13 s |
| Relief Valve Setting – Lower | 500 psi |
| Body Lower Time – High Idle | 13 s |
Final Drives
| Planetary Ratio | 7.0:1 |
| Differential Ratio | 2.736:1 |
| Total Reduction Ratio | 19.1576:1 |
Operating Specifications
| Nominal Payload Class (100%) | 200000 lb (90718.4 kg) |
| Top Speed – Loaded | 41.7 mph (67.2 km/h) |
| Body Capacity – Sae 2:1 | 83.8 yd3 (64.1 m3) |
| Not To Exceed Payload (120%)* | 240000 lb (108862.1 kg) |
| Nominal Payload (100%) | 200000 lb (90718.4 kg) |
| Maximum Payload (110%) | 220000 lb (99790.3 kg) |
Service Refill Capacities
| Cooling System | 60.2 gal (227.9 L) |
| Steering System – Including Tank | 14.1 gal (53.4 L) |
| Brake Hoist System – Includes Tank | 117 gal (442.9 L) |
| Crankcase | 28.7 gal (108.7 L) |
| Torque Converter – Transmission System | 36.5 gal (138.2 L) |
| Brake Hoist System | 85 gal (321.8 L) |
| Final Drive – Each | 20 gal (75.8 L) |
| Fuel Tank (1) | 300 gal (1135.7 L) |
| Differentials | 59.9 gal (226.8 L) |
| Fuel Tank (2) | 350 gal (1324.9 L) |
Weight Distributions – Approximate
| Front Axle – Empty | 46 % |
| Front Axle – Loaded | 33 % |
| Rear Axle – Empty | 54 % |
| Rear Axle – Loaded | 67 % |
Weights – Approximate
| Target Gross Machine Weight | 363000 lb (164654.1 kg) |
Capacity – Dual Slope – 100% Fill Factor
| Struck | 54.8 yd3 (41.9 m3) |
| Heaped 2:1 (Sae) | 78.8 yd3 (60.3 m3) |
ROPS
| ROPS/FOPS Standards | Standards |
Sound
| Sound Standards | Standards |
Suspension
| Rear Axle – Oscillation | 5.4 degrees |
| Empty Loaded Cylinder Stroke Front | 2.9 in (73.7 mm) |
| Empty Loaded Cylinder Stroke Rear | 2.5 in (63.5 mm) |
Capacity – Coal Bodies – 100% Fill Factor
| Sae 2:1 – For Use With Material Densities Of 1160 Kg/M3 (1,950 Lb/Yd3) | 116 yd3 (88.7 m3) |
| Sae 2:1 – For Use With Material Densities Of 1040-1160 Kg/M3 (1,750-1,950 Lb/Yd3) | 139 yd3 (106.3 m3) |
| Sae 2:1 – For Use With Material Densities Of 950-1040 Kg/M3 (1,600-1,750 Lb/Yd3) | 144 yd3 (110.1 m3) |
| Sae 2:1 – For Use With Material Densities Less Than 950 Kg/M3 (1,600 Lb/Yd3) | 165 yd3 (126.2 m3) |
Capacity – X Body – 100% Fill Factor
| Struck | 56.3 yd3 (43.1 m3) |
| Heaped 2:1 (Sae) | 83.8 yd3 (64.1 m3) |
