Contents
Engine Details
| Net Torque | 2944 lb ft (3991.6 Nm) |
| Displacement | 1648 cu in (27.1 L) |
| Bore | 5.4 in (137.2 mm) |
| Stroke | 6 in (152.4 mm) |
| Net Power – Iso 9249 | 724 hp (539.9 kw) |
| Net Power – Sae J1349 | 717 hp (534.7 kw) |
| Net Power – 80/1269/Eec | 724 hp (539.9 kw) |
| Gross Power – Sae J1995 | 775 hp (578 kw) |
| Engine Model | Cat C27 ACERT |
| Rated Engine Speed | 1800 rpm |
| Engine Power – Iso 14396 | 762 hp (568.3 kw) |
| Peak Torque – Speed | 1200 rpm |
Transmission
| Reverse | 8.7 mile/h |
| Forward – 1 | 6.6 mph (10.7 km/h) |
| Forward – 2 | 9.3 mph (15 km/h) |
| Forward – 3 | 12.6 mph (20.3 km/h) |
| Forward – 4 | 16.8 mph (27.1 km/h) |
| Forward – 5 | 22.8 mph (36.7 km/h) |
| Forward – 6 | 30.7 mph (49.5 km/h) |
| Forward – 7 | 41.6 mph (67 km/h) |
Steering
| Steering Standards | SAE J1511 FEB94 ISO 5010:1992 |
| Steer Angle | 31 degrees |
| Turning Diameter – Front | 77.1 ft in (23.6 m) |
| Turning Circle – Clearance Diameter | 85.6 ft in (26.1 m) |
Tires
| Standard Tire | 24.00R35 (E4) |
Brakes
| Brake Surface – Front | 257 in2 (0.2 m2) |
| Brake Surface – Rear | 9497 in2 (6.2 m2) |
| Brake Standards | ISO 3450:1996 |
Body Hoists
| Pump Flow – High Idle | 118 gal/min |
| Relief Valve Setting – Raise | 2502 psi |
| Body Raise Time – High Idle | 10 s |
| Body Lower Time – Float | 14 s |
| Body Power Down – High Idle | 14 s |
| Relief Valve Setting – Lower | 500 psi |
Final Drives
| Planetary Ratio | 4.80:1 |
| Differential Ratio | 3.64:1 |
| Total Reduction Ratio | 17.49:1 |
Operating Specifications
| Nominal Payload Class (100%) | 122000 lb (55338.3 kg) |
| Top Speed – Loaded | 41.6 mph (67 km/h) |
| Body Capacity – Sae 2:1 | 46.8 yd3 (35.8 m3) |
| Maximum Working Payload (110%) | 134000 lb (60781.4 kg) |
| Not To Exceed Payload (120%)* | 146200 lb (66315.2 kg) |
Service Refill Capacities
| Cooling System | 45 gal (170.4 L) |
| Differential – Final Drives | 38 gal (143.9 L) |
| Steering Tank | 9.5 gal (36 L) |
| Steering System – Including Tank | 14 gal (53 L) |
| Fuel Tank Capacity | 210 gal (795 L) |
| Crankcase | 24 gal (90.9 L) |
| Brake/Hoist Hydraulic Tank | 46.5 gal (176.1 L) |
| Brake Hoist System | 85 gal (321.8 L) |
| Torque Converter – Transmission System – Hrc | 18 gal (68.2 L) |
| Torque Converter – Transmission System – Lrc | 16 gal (60.6 L) |
Weight Distributions – Approximate
| Front Axle – Empty | 53 % |
| Front Axle – Loaded | 35 % |
| Rear Axle – Empty | 47 % |
| Rear Axle – Loaded | 65 % |
Weights – Approximate
| Maximum Gross Vehicle Weight | 226503 lb (102740.1 kg) |
Capacity – Dual Slope – 100% Fill Factor
| Struck | 35.2 yd3 (26.9 m3) |
| Heaped 2:1 (Sae) | 46.8 yd3 (35.8 m3) |
Capacity – Flat Floor – 100% Fill Factor
| Struck | 34.4 yd3 (26.3 m3) |
| Heaped 2:1 (Sae) | 46.5 yd3 (35.5 m3) |
ROPS
| ROPS/FOPS Standards | Standards |
Sound
| Sound Standards | Standards |
Suspension
| Rear Axle – Oscillation | 8.1 degrees |
| Empty Loaded Cylinder Stroke Front | 9.2 in (233.7 mm) |
| Empty Loaded Cylinder Stroke Rear | 5.8 in (147.4 mm) |
