Contents
- Dimensions
- Dump
- Engine Details
- Operational Specs
- Transmission
- Steering
- Weights
- Tires
- Brakes
- Body Hoists
- Final Drives
- Operating Specifications
- Service Refill Capacities
- Weight Distributions – Approximate
- Weights – Approximate
- Capacity – Dual Slope – 100% Fill Factor
- Capacity – Flat Floor – 100% Fill Factor
- ROPS
- Sound
- Suspension
- Approximate Weights – Dual Slope
- Approximate Weights – Flat Floor
Dimensions
| Overall Length | 33.58 ft in (10235.19 mm) |
| Overall Width | 17.83 ft in (5425 mm) |
| Overall Height | 14.58 ft in (4435 mm) |
| Wheelbase | 13.83 ft in (4215 mm) |
| Ground Clearance | 2.5 ft in (762 mm) |
| Dump Height | 30.42 ft in (9261 mm) |
| Dump Ground Clearance | 2.08 ft in (626 mm) |
| Inside Body Depth – Maximum | 5.92 ft in (1.81 m) |
| Inside Body Length | 20.5 ft in (6.25 m) |
| Inside Body Width | 12 ft in (3.66 m) |
| Loading Height – Empty | 12.5 ft in (3.81 m) |
| Centerline Front Tire Width | 10.5 ft in (3.21 m) |
| Centerline Of Rear Dual Tire Width | 9.58 ft in (2.92 m) |
| Dump Clearance | 2 ft in (0.61 m) |
| Engine Guard Clearance | 2.33 ft in (0.72 m) |
| Front Canopy Height | 14.58 ft in (4.45 m) |
| Height – Top Of ROPS | 13.5 ft in (4.12 m) |
| Overall Canopy Width | 15.5 ft in (4.73 m) |
| Overall Height – Body Raised | 30.42 ft in (9.28 m) |
| Overall Tire Width | 14.5 ft in (4.42 m) |
| Rear Axle – Clearance | 2.17 ft in (0.67 m) |
| Rear Axle – Tail | 9 ft in (2.75 m) |
| Wheel Base | 13.83 ft in (4.22 m) |
| Operating Width | 17.83 ft in (5434.59 mm) |
| Outside Body Width | 12.92 ft in (3.94 m) |
| Overall Body Length | 30.25 ft in (9.23 m) |
Dump
| Dump Angle | 60 degrees |
| Lower Time | 12.5 sec |
| Raise Time | 9.5 sec |
| Load Capacity – Struck | 33.8 yd3 (25.9 m3) |
| Load Capacity – Heaped | 45.9 yd3 (35.1 m3) |
| Rated Payload | 120000 lb (54431.09 kg) |
Engine Details
| Number Of Cylinders | 12 |
| Engine Make | CAT |
| Engine Model | C27 ACERT |
| Gross Power | 740 hp (552 kw) |
| Net Power | 702.7 hp (524 kw) |
| Power Measured @ | 1800 rpm |
| Max Torque | 2507 lb ft (3399.1 Nm) |
| Displacement | 1649 cu in (27.1 L) |
| Aspiration | Turbocharged |
| Peak Torque | 2507 lb ft (3399.1 Nm) |
| Bore | 5.4 in (137.2 mm) |
| Stroke | 6 in (152.4 mm) |
| Net Power – Cat | 702.7 hp (524.1 kw) |
| Net Power – Iso 9249 | 703 hp (524.3 kw) |
| Net Power – Sae J1349 | 703 hp (524.3 kw) |
| Net Power – 80/1269/Eec | 703 hp (524.3 kw) |
| Gross Power – Sae J1995 | 740 hp (551.9 kw) |
| Engine Model | Cat C27 ACERT |
| Flywheel Power | 702.7 hp (524.1 kw) |
| Rated Engine Speed | 1800 rpm |
Operational Specs
| Fuel Tank Capacity | 185 gal (700 L) |
| Cooling System Fluid Capacity | 46 gal (175 L) |
| Engine Oil Capacity | 19 gal (72 L) |
| Diff And Final Drive Fluid Capacity | 41 gal (155 L) |
| Steering System Fluid Capacity | 16 gal (60 L) |
| Brake/Hoist System Fluid Capacity | 81 gal (307 L) |
| Hydraulic System Fluid Capacity | 19 gal (72 L) |
| Tire Size | 24.00R35(E4) |
Transmission
| Transmission Type | Gear |
| Number Of Gears – Forward | 7 |
| Number Of Gears – Reverse | 1 |
| Max Speed | 41.9 mph (67.5 km/h) |
| Reverse | 8.8 mile/h |
| Forward – 1 | 6.7 mph (10.8 km/h) |
| Forward – 2 | 9.3 mph (15 km/h) |
| Forward – 3 | 12.6 mph (20.3 km/h) |
| Forward – 4 | 17 mph (27.4 km/h) |
| Forward – 5 | 23 mph (37.1 km/h) |
| Forward – 6 | 31 mph (49.9 km/h) |
| Forward – 7 | 41.9 mph (67.5 km/h) |
Steering
| Steering Standards | SAE J1511 FEB94 ISO 5010:1992 |
| Steer Angle | 31 degrees |
| Turning Diameter – Front | 77.1 ft in (23.5 m) |
| Turning Circle – Clearance Diameter | 85.7 ft in (26.2 m) |
Weights
| Empty Weight | 98312 lb (44594 kg) |
| Loaded Weight | 222000 lb (100698 kg) |
| Weight Distribution Front – Empty | 51 % |
| Weight Distribution Rear – Empty | 49 % |
| Weight Distribution Front – Loaded | 35 % |
| Weight Distribution Rear – Loaded | 65 % |
Tires
| Standard Tire | 24.00R35 (E4) |
Brakes
| Brake Surface – Front | 216 in2 (0.2 m2) |
| Brake Surface – Rear | 9497 in2 (6.2 m2) |
| Brake Standards | ISO 3450: 1996 |
Body Hoists
| Pump Flow – High Idle | 148 gal/min |
| Relief Valve Setting – Raise | 2500 psi |
| Body Raise Time – High Idle | 9.5 s |
| Body Lower Time – Float | 12.5 s |
| Relief Valve Setting – Lower | 500 psi |
Final Drives
| Planetary Ratio | 4.80:1 |
| Differential Ratio | 3.64:1 |
| Total Reduction Ratio | 17.49:1 |
Operating Specifications
| Nominal Payload Class (100%) | 122000 lb (55338.3 kg) |
| Top Speed – Loaded | 41.9 mph (67.5 km/h) |
| Maximum Capacity | 107080 lb (48570.7 kg) |
| Raise Time | 9.5 s |
| Lower Time | 12.5 s |
| Steer Angle | 31 degrees |
| Body Capacity – Sae 2:1 | 45.8 yd3 (35.1 m3) |
| Maximum Working Payload (110%) | 134000 lb (60781.4 kg) |
| Not To Exceed Payload (120%)* | 146000 lb (66224.5 kg) |
| Turning Diameter – Front | 77.1 ft in (23.6 m) |
Service Refill Capacities
| Cooling System | 46 gal (174.2 L) |
| Differential – Final Drives | 41 gal (155.3 L) |
| Steering Tank | 9 gal (34.1 L) |
| Steering System – Including Tank | 16 gal (60.6 L) |
| Fuel Tank Capacity | 185 gal (700.4 L) |
| Torque Converter – Transmission System – Including Sump | 19 gal (72 L) |
| Brake Hoist System – Includes Tank | 81 gal (306.7 L) |
| Crankcase | 25 gal (94.7 L) |
| Torque Converter – Transmission System | 14 gal (53 L) |
| Brake / Hoist / Fan Hydraulic Tank | 35 gal (132.5 L) |
Weight Distributions – Approximate
| Front Axle – Empty | 51 % |
| Front Axle – Loaded | 35 % |
| Rear Axle – Empty | 49 % |
| Rear Axle – Loaded | 65 % |
Weights – Approximate
| Target Gross Machine Operating Weight | 222001 lb (100698 kg) |
Capacity – Dual Slope – 100% Fill Factor
| Struck | 35 yd3 (26.8 m3) |
| Heaped 2:1 (Sae) | 46.5 yd3 (35.6 m3) |
Capacity – Flat Floor – 100% Fill Factor
| Struck | 33.8 yd3 (25.9 m3) |
| Heaped 2:1 (Sae) | 45.9 yd3 (35.1 m3) |
ROPS
| ROPS/FOPS Standards | SAE J1040 MAY94, ISO 3471:1994 ROPS and ISO 3449:1992 Level II FOPS |
Sound
| Sound Standards | .ANSI/SAE J1166 MAY90 |
Suspension
| Rear Axle – Oscillation | 8 degrees |
| Effective Cylinder Stroke – Front | 9.3 in (235 mm) |
| Effective Cylinder Stroke – Rear | 5.9 in (149.9 mm) |
Approximate Weights – Dual Slope
| Body | 28574 lb (12961 kg) |
Approximate Weights – Flat Floor
| Body | 28451 lb (12905.2 kg) |
