Home » Mini Excavators » Yanmar Mini Excavators » Yanmar SV08-1B Mini Excavator

Yanmar SV08-1B Mini Excavator

Contents
  1. Working Range
  2. Dimensions
  3. Undercarriage
  4. Engine Details
  5. Operational Specs
  6. Swing Mechanism
  7. Buckets

Working Range

Boom Swing – Left 45 degrees
Boom Swing – Right 90 degrees

Dimensions

Width To Outside Of Tracks 2.76 ft in (840 mm)
Length Of Track On Ground 8.54 ft in (2600 mm)
Ground Clearance 0.43 ft in (130 mm)
Height To Top Of Cab 7.55 ft in (2300 mm)
Tail Swing Radius 2.38 ft in (725 mm)

Undercarriage

Ground Pressure 4.16 psi (28.62 kPa)
Max Travel Speed 1.12 mph (1.8 km/h)

Engine Details

Engine Make YANMAR
Engine Model 2TE67L-BV4
Gross Power 10.3 hp (7.7 kw)
Power Measured @ 2800 rpm

Operational Specs

Operating Weight 2348 lb (1065 kg)
Fuel Tank Capacity 2.7 gal (10 L)
Hydraulic Pump Flow Capacity 2.6 gal/min (9.9 L/min)

Swing Mechanism

Swing Speed 8.4 rpm

Buckets

Bucket Digging Force – Sae 2360 lb (10.5 kN)
Arm Digging Force 1390 lb (6.2 kN)
Ask a question

You may also like
Massey Ferguson Dash Control Center / DCC / Instrument Panel
Massey Ferguson 4
Massey Ferguson Error Codes List / MF Fault DTCs
Massey Ferguson Diagnostic Trouble Codes (DTCs) are alphanumeric codes generated by the onboard diagnostic
New Holland Rear PTO Errors
CNH Industrial 0
New Holland & Case IH Tractor Rear PTO Error List
Certainly, here’s a guide to understanding Rear PTO (Power Take-Off) error codes for New
Massey Ferguson Error 0A.41.FF Connection problem on a hydraulic valve
Massey Ferguson 2
Massey Ferguson Diagnostic Trouble Codes List: 06.X.1B – 0B.X.24
Massey Ferguson Diagnostic Trouble Codes are alphanumeric codes generated by the tractor’s onboard diagnostic
JLG DTCs for MEWPs, Boom Lifts and Telehandlers
Error Codes 5
JLG Error Codes List – Diagnostic Fault / Trouble Codes (DTCs) for MEWPs / Lifts / Telehandlers
Effective troubleshooting and timely maintenance of JLG mobile elevating work platforms (MEWPs) and telehandlers
New Holland Tractor Engine DTC Fault Codes
CNH Industrial 6
New Holland & Case IH Engine Errors (Diagnostic Trouble Codes)
In the world of agriculture, where fields stretch to the horizon and the hum
Sheet Metal Gauge Size Chart
Guides 4
Sheet Metal Gauge Size Chart & Tools
Gauge sizes, often denoted as “gage, delineate the thickness of sheet metal, employing a