Contents
Working Range
| Max Reach Along Ground | 15.29 ft in (4660 mm) |
| Minimum Front Swing Radius (No Offset) | 6.71 ft in (2045 mm) |
| Minimum Front Swing Radius (Fully Offset) | 6.14 ft in (1870 mm) |
| Max Digging Reach | 15.65 ft in (4770 mm) |
| Max.Dumping Height | 10.57 ft in (3220 mm) |
| Maximum Digging Depth – Dozer Down | 10.01 ft in (3050 mm) |
| Maximum Digging Depth – Dozer Up | 8.99 ft in (2740 mm) |
| Maximum Vertical Wallcut Depth | 6.83 ft in (2080 mm) |
| Maximum Height To Dipper Nose Pivot Pin | 12.57 ft in (3830 mm) |
Dimensions
| Ground Clearance | 1.15 ft in (350 mm) |
| Height To Top Of Cab | 7.88 ft in (2400 mm) |
| Tail Swing Radius | 4.01 ft in (1220 mm) |
| Track Gauge | 4.11 ft in (1252 mm) |
| Width Over Tracks | 4.93 ft in (1502 mm) |
| Overall Width Of Superstructure | 5.09 ft in (1550 mm) |
| Removal Counterweight Clearance | 2.5 ft in (762 mm) |
| Transport Height- Minimum | 7874.02 ft in (2400 m) |
| Transport Length, Minimum | 13385.83 ft in (4080 m) |
| Cab Height | 61.19 in (1554 mm) |
Undercarriage
| Number Of Track Rollers Per Side | 3 |
| Track Tension | Grease |
| Tractive Effort | 55.12 lb (25 kg) |
Engine Details
| Fuel | Diesel |
| Starter Motor | 2 KW |
| Engine Model | 403D-I5 |
| Gross Power | 24.7 hp (18.4 kw) |
| Cooling System | Water cooled |
| Net Power | 22.2 hp (16.5 kw) |
| Power Measured @ | 2100 rpm |
| Displacement | 91291.6 cu in (1496 L) |
| Torque Measured @ | 1800 rpm |
| Alternator | 65 amps |
Operational Specs
| Operating Weight | 6320.7 lb (2867 kg) |
| Fuel Tank Capacity | 14.8 gal (56 L) |
| Cooling System Fluid Capacity | 2.3 gal (8.5 L) |
| Hydraulic System Fluid Capacity | 18.8 gal (71 L) |
| Engine Oil Capacity | 1.2 gal (4.5 L) |
| Operational Voltage | 12 V |
| Hydraulic Pump Flow Capacity | 17.5 gal/min (66 L/min) |
Performance
| Travel Speed Low | 1.6 mph (2.5 km/h) |
| Travel Speed – High | 3.1 mph (4.9 km/h) |
| Gradeability | 36 % |
Blade
| Approach Angle | 31 degrees |
Hydraulic System
| Nominal Output | 25.4 gal/min (96 L/min) |
Blade
| Maximum Height | 1.1 ft in (333 mm) |
Hydraulic System
| Slew Main Relief | 190 lpm |
| Excavator/Track Main Relief | 235 bar |
Blade
| Dig Depth (Below Ground) | 1.4 ft in (405 mm) |
| Reach In Front Of Tracks | 1.2 ft in (342 mm) |
Hydraulic System
| Auxiliary Hydraulic Flow | 15.6 gal/min (59 L/min) |
Blade
| Blade Width | 1550 mm |
Hydraulic System
| Pump Type | 2 Variable & 1 Gear |
Blade
| Height | 10.6 in (268 mm) |
Boom
| Boom Swing Left | 45 degrees |
| Boom Swing Right | 60 degrees |
| Bucket Rotation | 189 degrees |
| Dipper Rotation | 119 degrees |
| Bucket Tearout | 5170.7 lb (23 kN) |
| Dipper Tearout | 3821.8 lb (17 kN) |
| Slew Speed | 9.6 rpm |
