CAT 826G Series II Landfill Compactor Specs, Weight & Dimensions

Contents

Dimensions (Approximate)

Centerline Of Rear Axle To Edge Of Counterweight	8.61 ft in (2.63 m)
Centerline Of Rear Axle To Hitch	6.07 ft in (1.86 m)
Height – Bottom Of Ladder	2.33 ft in (0.72 m)
Ground Clearance – Counterweight	3.38 ft in (1.04 m)
Height – Top Of Cab With A/C	13.75 ft in (4.2 m)
Height – Top Of Exhaust Pipe	12.57 ft in (3.84 m)
Height – Top Of Hood	8.86 ft in (2.71 m)
Length – With Blade On Ground	27.13 ft in (8.27 m)
Turning Radius – Inside	10.58 ft in (3.23 m)
Turning Radius – Outside	24.06 ft in (7.34 m)
Wheel Base	145.67 ft in (44.41 m)
Width – Over End Bits – Blade	14.77 ft in (4.51 m)
Width – Over Wheels	12.47 ft in (3.81 m)

Operating Weight

81498 lb (36966.9 kg)

Relief Valve Setting

3500 psi

Front

Planetary – Fixed

Lift Cylinder Bore X Stroke

114.3 mm x 576 mm 4.49 in x 22.68 in

Oscillating Rear

Planetary – Oscillating 5 degrees

Vane Pump Output At 2,000 Rpm And 6900 Kpa (1,000 Psi)

26.5 gal/min

Standards

Meet OSHA, SAE J1473 Dec 84, ISO 3450-1985 standards.

Cooling System	21.9 gal (83 L)
Fuel Tank Capacity	166.5 gal (630.3 L)
Crankcase	9 gal (34.1 L)
Hydraulic Tank	23.2 gal (87.9 L)
Transmission	16.4 gal (62.1 L)
Differential – Final Drives – Front	23.8 gal (90.1 L)
Differential – Final Drives – Rear	23.8 gal (90.1 L)

ROPS/FOPS

Meets SAE and ISO standards.

Standards

Meets ANSI/SAE and ISO standards.

Height	6.3 ft in (1.9 m)
Width – Over End Bits	14.8 ft in (4.6 m)
Moldboard – Length	14.1 ft in (4.3 m)
Lift Speed At Rated Rpm	1.42 ft/s
End Bits (2), Self-Sharpening, Length – Each	19 in (482.6 mm)
Cutting Edges (2), Reversible, End Section Length (Each)	5.9 ft in (1.8 m)
End Bits (2), Self-Sharpening, Width X Thickness	254 mm x 25 mm 10 in x 1 in
Cutting Edges (2), Reversible, Width X Thickness	254 mm x 25 mm 10 in x 1 in