Home » Forklifts » Yale Forklifts » Yale HDF50 Forklift

Yale HDF50 Forklift

Contents
  1. Dimensions
  2. Mast
  3. Engine Details
  4. Operational Specs

Dimensions

Length To Fork Face 11.52 ft in (3510 mm)
Overall Width 6.88 ft in (2094 mm)
Overall Height – Mast Lowered 8.26 ft in (2515 mm)
Wheelbase 7.55 ft in (2300 mm)
Ground Clearance 8.47 in (215 mm)
Height To Top Of Overhead Guard 8.11 ft in (2470 mm)
Max Fork Height 14.03 ft in (4275 mm)
Turning Radius 10.8 ft in (3290 mm)

Mast

Mast Tip Forward 6 degrees
Mast Tip Rear 12 degrees
Lower Speed 88.6 ft/min (27.01 m/min)
Load Capacity 5000 lb (2267.97 kg)
Load Center 23.63 in (600 mm)
Lift Speed 90.6 ft/min (27.62 m/min)

Engine Details

Engine Make Hyundai
Engine Model D4DA
Power 96.6 hp (72 kw)
Torque 238.7 lb ft (323.7 Nm)
Power Measured @ 2300 rpm
Displacement 238 cu in (4 L)
Torque Measured @ 1700 rpm

Operational Specs

Operating Weight 19369 lb (8785.7 kg)
Max Speed 20.8 mph (33.5 km/h)
Ask a question

You may also like
John Deere Tractor PIN Locations
Serial Numbers 38
John Deere PIN Decoder – Where is the Serial Number Plate & How to Identify?
The Product Identification Number (PIN) / Serial Number plate on John Deere equipment contains
John Deere ACU Error Code 524103.04
John Deere 0
John Deere ACU Error Codes / Armrest Controller Unit Fault DTCs 000158.04 – 524254.31
John Deere Armrest Controller Unit (ACU) Error Codes, also known as Diagnostic Trouble Codes
Massey Ferguson DTC Codes List
Massey Ferguson 0
Massey Ferguson DTC Codes List: 04.02.E6 – 06.X.1A
Massey Ferguson Diagnostic Trouble Codes (DTC) are alphanumeric codes generated by the onboard diagnostic
New Holland and Case IH Tractor Error Codes
CNH Industrial 0
FAQ for New Holland & Case IH Tractor Fault Codes / DTCs
Modern agriculture relies on cutting-edge technology, and Case IH & New Holland tractors are
Kubota Engine DTC Codes
Kubota 25
Kubota Engine Error Codes (Fault Errors / DTC List)
Kubota engines, known for their reliability and efficiency, utilize error codes to help diagnose
John Deere 1990 CCS Air Drill (Central Commodity System) Specs
John Deere 0
John Deere 1990 CCS Air Drill (Central Commodity System)
The John Deere 1990 CCS™ (Central Commodity System) features metering gates at each individual